Where the SD card slot is and how to open it

The SD card slot on most GoPro models is on the side of the camera, behind a small door. On Hero 11, Hero 10, and Hero 9 models, look for a rectangular panel on the left side when you're holding the camera facing forward. On older models like the Hero 8, the slot is in the same location but the door may look slightly different.

To open the door, use your fingernail or a plastic tool to gently pry the edge marked with a small line or arrow. The door is hinged at one end, so it will swing open rather than come off completely. Do not force it — if it resists, you are likely pulling at the wrong edge.

Once the door is open, you will see two slots stacked vertically. The top slot is for the SD card. The bottom slot is for the battery (on some models) or a second SD card (on Hero 11 Black and other dual-slot models).

Key Takeaways

  • The SD card slot is behind a hinged door on the side of your GoPro, opened by gently prying the edge marked with a line or arrow.
  • Insert the SD card into the top slot with the gold contacts facing into the camera and the label facing outward, then push until you hear or feel a click.
  • GoPro cameras work with microSD cards (with an adapter) or full-size SD cards, depending on your model — check your manual to confirm which your camera accepts.
  • The camera will format the card the first time you insert it, which erases anything already on the card and prepares it for recording.
  • If the card does not click into place or the camera does not recognize it, remove it, inspect the gold contacts for dirt, and reinsert it firmly.

Which SD cards work with your GoPro

Most current GoPro models accept full-size SD cards, not microSD cards. Hero 11, Hero 10, and Hero 9 all use standard SD cards. Older models like the Hero 8 and Hero 7 also use full-size cards. If you already own a microSD card, you can use it with an adapter, but the camera itself does not have a microSD slot.

GoPro recommends using cards rated for video recording — look for cards marked V30 or higher, which means they can write data at a minimum speed of 30 megabytes per second. Cards rated V60 or V90 are faster and better for 4K or high frame rate recording, but V30 is the minimum. SanDisk Extreme, Lexar Professional, and Kingston Canvas Go are common choices that work reliably.

Check your camera's manual or the GoPro website for your specific model to see the maximum card capacity it supports. Most newer models accept cards up to 256 GB, but some older models max out at 128 GB or 64 GB.

The correct way to insert the card

Hold the SD card so the gold contacts face toward the inside of the camera and the label faces outward toward you. The card will only fit one way — if it feels like it is going in at an angle or with resistance, flip it over and try again.

Slide the card straight into the top slot until you feel or hear a click. The click means the card is fully seated and locked in place. Do not force it — a properly inserted card slides in smoothly and stops when it clicks. If you push hard and do not hear a click, remove the card and check that the contacts are clean and that you are inserting it in the right direction.

Once inserted, close the side door by swinging it back into place until it latches. You will hear or feel a small snap when it is closed. The camera is now ready to format the card.

What happens when you insert a new card

The first time you insert a new SD card into your GoPro, the camera will ask you to format it. Formatting erases anything on the card and prepares it for recording. This is normal and necessary — do not skip this step or try to use the card without formatting.

To format the card, power on the camera and navigate to Settings using the side buttons or touchscreen (depending on your model). Look for a Storage or Format option, select it, and confirm. The process takes a few seconds to a minute depending on the card size. Once it is complete, the camera will show you the available storage space and you can begin recording.

If you insert a card that already has files on it, the camera will still ask to format it. Formatting will erase those files, so back them up to a computer first if you need to keep them.

Removing the SD card safely

To remove the card, power off the camera first. Open the side door the same way you opened it to insert the card. Look at the SD card in the top slot — you will see it sticking out slightly from the camera body.

Push the card gently inward toward the camera. You will feel it click and then spring back out slightly. Grasp the edge and pull it straight out. Do not yank or twist — a smooth, straight pull removes it cleanly.

Close the side door and store the card in a protective case or sleeve. SD cards are durable but can be damaged by extreme heat, moisture, or physical bending, so keep it in a cool, dry place when not in use.

Troubleshooting when the card won't insert or isn't recognized

If the card will not slide in smoothly, stop and check the direction. The gold contacts must face inward and the label must face outward. Flip the card and try again. If it still resists, remove it and inspect both the card contacts and the slot inside the camera for dirt, lint, or debris. Use a dry cloth to gently wipe the gold contacts on the card and the metal contacts inside the slot.

If the card inserts and clicks but the camera does not recognize it, power off the camera, remove the card, wait 10 seconds, and reinsert it. Sometimes a loose connection causes the camera to miss the card on the first try. If the camera still does not recognize it after reinsertion, try formatting the card in a computer using a card reader, then reinsert it into the camera.

If the card clicks in but the camera shows a "card error" message, the card may be incompatible or damaged. Check the GoPro website to confirm the card model is on the approved list for your camera. If it is approved and the error persists, the card itself may be faulty — try a different card to rule out a problem with the camera slot.

How to know when your SD card is full

Your GoPro will display a storage indicator on the screen showing how much space is left. When the card is full, the camera will stop recording and show a "storage full" message. At that point, you have two options: delete files from the card using the camera's menu, or remove the card and transfer the files to a computer.

To transfer files, connect the camera to a computer using a USB cable, or remove the SD card and use a card reader. Copy the video and photo files to your computer, then format the card in the camera to erase them and free up space. Formatting in the camera is faster and more reliable than deleting files one at a time.

Frequently Asked Questions

Can I use a microSD card in my GoPro?

Most GoPro models use full-size SD cards, not microSD cards. If you have a microSD card, you can use it with a microSD-to-SD adapter, but the adapter adds bulk and is not ideal for a compact camera. It is better to buy a full-size SD card that fits your camera natively.

What speed SD card do I need for 4K recording?

GoPro recommends V30 or higher for standard recording, but V60 or V90 is better for 4K or high frame rate modes. V30 means the card can write at least 30 MB/s, which is the minimum for smooth 4K video. Faster cards reduce the risk of dropped frames or stuttering during playback.

Will my GoPro work without an SD card?

No. GoPro cameras require an SD card to record video or photos. The camera has no internal storage. If you power on the camera without a card inserted, it will show a message asking you to insert one.

How do I know if my SD card is compatible with my GoPro?

Check your camera's manual or visit the GoPro support website and search for your model number. GoPro publishes a list of tested and approved SD cards for each camera. Using an approved card reduces the risk of compatibility issues or recording errors.

Can I record while the SD card is being formatted?

No. The camera must finish formatting the card before you can record. Formatting typically takes less than a minute. Once it is complete, the camera will show the available storage and you can begin recording when ready.