The charging light tells you the status at a glance

When you plug your GoPro into power, a light on the camera body changes color to show what is happening. A red light means the battery is charging. A green light means the battery is fully charged. If you see no light at all, the camera is not receiving power — check that the cable is seated firmly in the port and that the power adapter is plugged in.

The light is usually located on the side or back of the camera near the charging port. On newer models like the GoPro Hero 11 and Hero 12, it is a small LED that glows clearly even in dim light. On older models, the light may be dimmer or positioned differently, so consult your camera's manual if you are unsure where to look.

The charging light is the fastest way to confirm power is flowing. You do not need to turn the camera on or open any menus — just plug it in and watch for the color change within a few seconds.

Key Takeaways

  • A red light means your GoPro battery is actively charging; a green light means it is fully charged.
  • No light at all usually means the cable is loose or the power adapter is not plugged in — reseat both connections firmly.
  • The charging light appears on the camera body near the port and works whether the camera is on or off.
  • Charging time varies by battery size and power adapter wattage, but most GoPro batteries reach full charge in two to three hours.

Check the battery percentage on the camera screen

If you turn the camera on while it is plugged in, the screen will show the current battery percentage in the top corner. Watch this number climb as the battery charges. This method confirms charging is actually happening, not just that the light is on.

Open the camera, power it on, and look at the battery icon in the status bar. The percentage will update every few seconds. If the percentage stays the same or drops, the camera may not be charging properly — unplug it, wait 30 seconds, and plug it back in. If the problem persists, try a different USB cable or power adapter.

Understand what the light colors mean

Red light: The battery is charging. This is normal and expected. Leave the camera plugged in until the light turns green.

Green light: The battery is fully charged. You can unplug the camera and use it. If you leave it plugged in after it reaches full charge, most modern GoPros stop charging to protect the battery from overcharging.

No light: The camera is not receiving power. Check that the USB cable is pushed all the way into the port on the camera and that the power adapter is plugged into a working outlet. Try a different outlet to rule out a dead circuit.

Blinking or flickering light: On some models, a blinking light can mean the battery is too cold to charge safely. Move the camera to a warmer location and try again. If the light continues to blink, the charging port or battery may be damaged and you may need to contact GoPro support.

Use the right cable and power adapter

GoPro cameras charge via USB-C or USB-A depending on the model. Using the wrong cable type will not work at all. Check your camera's manual to confirm which port it has, then use the cable that came in the box or a certified replacement.

The power adapter matters too. A low-wattage adapter (like a phone charger rated for 5 watts) will charge the battery, but slowly — sometimes taking four to five hours. A higher-wattage adapter (18 watts or more) charges faster, usually in two to three hours. GoPro sells official fast-charging kits, but any USB power adapter rated for your cable type will work.

Avoid cheap third-party cables, especially if the light does not appear when you plug in. A damaged or poorly made cable can prevent the charging circuit from recognizing the battery. If you suspect the cable is the problem, borrow one from a friend or buy a replacement from a trusted brand.

Charging times and what affects them

A standard GoPro battery charged with a 5-watt adapter takes roughly three hours to go from empty to full. With an 18-watt or higher adapter, the same battery usually charges in one and a half to two hours. Larger batteries (like those in the Hero 11 Black) take longer than smaller ones.

Cold temperatures slow charging significantly. If your camera is cold from being outside, bring it indoors and let it warm up before plugging it in. Charging in very cold conditions (below 32°F) may not work at all, even if the light appears.

The camera draws power while it charges, so if you are using the camera while plugged in — recording, reviewing footage, or transferring files — charging will be slower or may not happen at all. For fastest charging, turn the camera off and leave it unplugged from your computer.

What to do if the light does not appear

Start with the simplest fixes. Unplug the cable, wait 10 seconds, and plug it back in firmly. Make sure the cable is fully inserted into the port — it should click or seat with resistance. Check that the power adapter is plugged into a working outlet by plugging in another device (like a phone) to confirm the outlet has power.

Try a different USB cable if you have one available. Cables wear out and can stop working even if they look fine. If a different cable works, the original cable is damaged and should be replaced.

Inspect the charging port on the camera for debris, lint, or corrosion. If you see anything inside the port, use a dry cotton swab or a small flashlight to look closer, but do not insert anything into the port that could damage the contacts. If the port looks corroded or damaged, contact GoPro support — the port may need professional repair.

If the light still does not appear after trying a different cable and outlet, the battery or charging circuit may be faulty. Contact GoPro support with details of what you have tried. If your camera is under warranty, they may send you a replacement battery or camera.

Charging from a computer or power bank

You can charge a GoPro from a computer's USB port, but it will be slow — most computer ports provide only 0.5 to 1 amp of power, compared to 2 to 3 amps from a wall adapter. Expect charging to take four to six hours this way. The light will still appear and change color normally.

Portable power banks work too, as long as they have a USB port that matches your camera's cable type. A power bank with at least 10,000 mAh capacity can fully charge a GoPro battery. Again, charging will be slower than with a wall adapter, but the light will indicate status the same way.

Frequently Asked Questions

Can I use my GoPro while it is charging?

Yes, but charging will be slower or may stop entirely if the camera is actively recording or transferring files. For fastest charging, turn the camera off. If you need to use it, expect the battery to charge more slowly than usual.

Is it bad to leave my GoPro plugged in after it is fully charged?

Modern GoPro models stop charging once the battery reaches 100%, so leaving it plugged in overnight will not damage the battery. Older models may not have this protection, so check your manual. If you plan to store the camera for weeks or months, unplug it once it is full.

Why is my GoPro light red but the battery percentage is not going up?

The light may be on but the charging circuit may not be active. Try unplugging and replugging the cable. If the percentage still does not increase after five minutes, try a different cable or power adapter. If the problem continues, the battery or charging port may be faulty.

How long does a GoPro battery take to charge from empty?

With a standard 5-watt adapter, expect two to three hours. With an 18-watt or higher adapter, most batteries charge in one and a half to two hours. Cold temperatures and using the camera while charging will extend these times.

What does a blinking red light mean?

A blinking or flickering red light usually means the battery is too cold to charge. Move the camera to a warmer location and try again. If it continues to blink, the charging port or battery may be damaged and you should contact GoPro support.