The three ways to attach a GoPro to a helmet
A GoPro mounts to a helmet using one of three methods: the adhesive pad that sticks directly to the helmet surface, the helmet strap that wraps around the helmet, or the side mount that clamps onto the helmet's edge or visor. The adhesive pad is the most permanent and gives you a clean look. The helmet strap is adjustable and works on any helmet shape. The side mount lets you position the camera at an angle without covering large areas of your helmet.
Which method you choose depends on your helmet type, how often you want to reposition the camera, and whether you plan to move the mount between helmets. Motorcycle helmets, bicycle helmets, and ski helmets all work with these mounts, but the fit and stability differ slightly for each.
Key Takeaways
- The adhesive pad mount sticks permanently to your helmet and requires a clean, dry surface and 24 hours to cure before use.
- The helmet strap mount wraps around your helmet and works on any shape, but you need to position it so the camera doesn't obstruct your vision or hearing.
- The side mount clamps onto your helmet's edge or visor and lets you angle the camera without using adhesive.
- All three methods come with the standard GoPro quick-release mechanism, so you can swap cameras or remove the mount without tools.
- Test your mount before a real ride or activity to make sure it doesn't move, rattle, or block your view.
Using the adhesive pad mount
The adhesive pad is a foam square with 3M adhesive on one side and a GoPro quick-release socket on the other. It creates a permanent bond and sits flush against your helmet, so it doesn't catch wind or add bulk. This is the most stable option if you plan to keep the camera in one spot.
Clean the helmet surface with rubbing alcohol and let it dry completely. The surface must be smooth and free of dirt, dust, or helmet coating. Wipe the area with a dry cloth after cleaning. Peel the backing off the adhesive pad and press it firmly onto the helmet for 30 seconds, explore steady pressure across the entire pad. Do not use the camera for at least 24 hours — the adhesive needs time to cure and reach full strength.
Once the pad is set, slide your GoPro onto the quick-release socket until you hear a click. The camera should not wobble or shift when you gently tug it. If it does, remove the camera and check that the pad is fully adhered to the helmet. Press down again if needed and wait another 12 hours before retesting.
Using the helmet strap mount
The helmet strap mount is a flexible band with a GoPro quick-release socket attached. It wraps around your helmet and tightens with a velcro or buckle closure. This method works on any helmet shape and lets you move the mount between helmets without leaving marks or residue.
Position the strap so the camera points forward and sits above your line of sight — you should not see the camera body when you look straight ahead. Wrap the strap around the helmet, keeping it snug but not so tight that it digs into the padding or distorts the helmet shape. find the closure and tug the strap to make sure it does not slip. Slide your GoPro onto the quick-release socket and check that it does not move when you shake your head gently.
The strap can rotate slightly during use, especially on smooth helmet surfaces. Before your first ride, wear the helmet and move your head side to side and up and down to confirm the camera stays in place. If the strap creeps, tighten the closure or add a thin rubber band around the helmet under the strap to increase friction.
Using the side mount
The side mount is a clamp that attaches to the edge or visor of your helmet. It holds a GoPro quick-release socket and lets you angle the camera without using adhesive or wrapping a strap around the helmet. This works well on motorcycle helmets with a visor or on helmets with a defined edge.
Loosen the clamp screw and position the mount on the helmet edge or visor. Tighten the screw firmly — it should not move when you tug it, but do not over-tighten, as this can crack the helmet material or strip the screw. Slide your GoPro onto the quick-release socket. Rotate the camera to your desired angle and lock it in place using the ball joint or friction mechanism on the mount.
Test the mount by shaking your head and moving the helmet around. The camera should not rattle or shift. If it does, check that all screws are tight and that the quick-release socket is fully seated. Some side mounts include a safety tether — a thin cord that connects the camera to the mount — which prevents the camera from falling if the quick-release fails.
Positioning the camera for the best shot
Camera angle matters for both video quality and safety. Point the camera slightly downward so it captures your hands, the road or trail ahead, and your surroundings. A camera pointed straight ahead or upward will show mostly sky and miss the action below.
On a motorcycle helmet, mount the camera on the side or front so it does not block your forward vision or your mirrors. On a bicycle helmet, the front or side works, but avoid mounting directly on top — this raises your center of gravity and can make the helmet feel unbalanced. On a ski helmet, the front or side mount works, but check that the camera does not interfere with goggles or your peripheral vision.
Wear the helmet and look in a mirror to see what the camera will record. Move your head and check that the camera angle stays consistent and that you can still see clearly. If the angle is wrong or the camera blocks your view, reposition the mount before you ride or ski.
Securing the camera so it doesn't fall
A GoPro can fall off if the quick-release socket is not fully seated or if the mount itself comes loose. Before every use, slide the camera onto the socket until you hear a distinct click. Tug the camera gently — it should not budge. If it slides off easily, reseat it and try again.
Check all screws and fasteners on the mount itself. On an adhesive pad, press down on the edges to confirm the pad is still bonded to the helmet. On a strap mount, tighten the velcro or buckle. On a side mount, turn the clamp screw clockwise until snug. Do this before every ride, not just the first time.
Many GoPro mounts include a safety tether — a cord or lanyard that connects the camera to the mount. If your mount has one, attach it. The tether will not prevent a fall, but it will keep the camera from disappearing into the woods or off a cliff if the quick-release fails.
Removing the mount without damaging your helmet
If you used an adhesive pad and want to remove it later, heat the pad with a hair dryer on low heat for 30 seconds to soften the adhesive. Gently peel one corner of the pad and work your way around. Pull slowly and at a shallow angle to avoid tearing the helmet paint or padding. Once the pad is off, use rubbing alcohol to dissolve any remaining adhesive residue, then wipe clean with a cloth.
Helmet strap and side mounts leave no residue and can be removed when ready. straightforward unbuckle the strap or loosen the clamp screw and lift the mount away. Store the mount in a dry place to keep the velcro or clamp mechanism in good condition.
Frequently Asked Questions
Will the adhesive pad damage my helmet?
The adhesive pad will not damage the helmet structure, but it will leave a mark or remove paint if you peel it off. The adhesive is designed to bond permanently, so treat it as a one-way decision. If you think you might move the camera later, use a strap or side mount instead.
Can I mount a GoPro on a full-face motorcycle helmet?
Yes. Use the adhesive pad on the front or side of the helmet, or use a side mount on the visor. Avoid mounting on the very top or back, as this can affect aerodynamics and wind noise. Test the mount at low speed before riding on a highway.
Does the camera add weight or throw off helmet balance?
A GoPro weighs about 5 ounces, which is noticeable but not dangerous. On a motorcycle helmet, the weight is usually not a problem. On a bicycle or ski helmet, some riders feel a slight pull forward. If balance bothers you, try a side mount instead of a front mount — this distributes the weight differently.
What if my helmet has a curved or rounded surface?
A strap mount works on any shape. An adhesive pad works best on flat or gently curved surfaces — if your helmet is very rounded, the pad may not make full contact. Test the pad on a small area first, or use a strap or side mount instead.
Can I use the same mount on different helmets?
A strap mount and side mount move between helmets easily. An adhesive pad is permanent on one helmet. If you own multiple helmets and want to use the same camera on all of them, use a strap or side mount.