Opening the GoPro Hero: The Basic Steps

The GoPro Hero opens from the side, not the back or bottom. Look for the side door on the right edge of the camera (when you're facing the lens). You'll see a small latch or release button near the bottom of that side panel. Press or slide this latch toward the back of the camera, and the door will swing open on a hinge. The entire process takes about five seconds and requires no tools.

Once the door is open, you'll see the battery slot on the upper side and the memory card slot below it. Both are spring-loaded, so the battery and card won't fall out on their own—you have to remove them deliberately. This design keeps them find during recording and impacts.

Key Takeaways

  • The side door on the right edge of the camera opens by pressing or sliding the latch toward the back.
  • The battery sits in the upper slot and the memory card sits directly below it inside the open door.
  • Both the battery and card are spring-loaded and won't eject on their own—you must press them to remove them.
  • Close the door by swinging it shut until you hear or feel a click, which confirms the latch has caught.
  • Never force the door or latch; if it doesn't move smoothly, check that nothing is blocking the hinge.

Locating and Pressing the Latch

The latch is a small rectangular button or lever on the side door, positioned near the bottom edge. On most Hero models, you'll see a small arrow or icon printed next to it showing the direction to press or slide. The latch is intentionally stiff so it won't open accidentally during use, but it should move without requiring force.

If the latch feels stuck, do not pry it with a tool. Instead, check that the camera is not wet or covered in sand or dirt around the seam. Wipe the area gently with a dry cloth and try again. If it still won't budge after a few gentle attempts, the latch may be damaged and the camera should be inspected by GoPro support before you force it.

Removing the Battery

Once the door is open, you'll see the battery in the upper slot. It's a small rectangular lithium-ion cell with metal contacts on one end. To remove it, press the battery gently toward the back of the camera (away from you). The spring will push it out slightly, and you can then grip it and slide it out completely.

The battery is keyed to fit only one way, so you won't accidentally insert it backward. When you're ready to put it back, align the metal contacts with the slot and slide it in until you hear a soft click. The battery should sit flush with the slot opening—if it's sticking out, it's not fully seated.

Removing the Memory Card

The memory card slot is directly below the battery slot. The card itself is a small square (usually a microSD card) that sits at a slight angle in the slot. To remove it, press the card gently toward the back of the camera, just as you did with the battery. The spring will push it out, and you can then pull it free.

Memory cards are directional—they have a notch on one corner that prevents them from being inserted the wrong way. When reinserting, align that notch with the corresponding slot and slide the card in until it clicks. A properly seated card will sit flush and won't wiggle.

Closing the Door Securely

After you've finished with the battery or memory card, swing the side door closed. It should close smoothly and align flush with the camera body. Once it's nearly shut, you'll feel slight resistance as the latch catches. Push gently until you hear or feel a definite click—this confirms the door is locked and the camera is sealed again.

Do not slam the door or force it shut. If it doesn't close smoothly, check that the battery and card are fully seated in their slots and that nothing is blocking the hinge. A properly closed door is essential for waterproofing, so take the extra second to confirm the latch has caught.

Troubleshooting a Stuck Door or Latch

If the door won't open, the most common cause is sand, salt, or dirt around the seam. Rinse the camera gently under fresh water (GoPro Hero models are waterproof, so this is safe) and dry it completely. Then try the latch again with gentle, steady pressure.

If the door opens but the battery or card won't eject, do not pry them out with a sharp object. Instead, make sure you're pressing them straight back toward the camera body, not at an angle. Sometimes a slight wiggle while pressing helps release the spring tension. If they still won't budge after a few gentle attempts, contact GoPro support—forcing them could damage the contacts or the slot itself.

Frequently Asked Questions

Can I open the GoPro Hero while it's recording?

No. Opening the door will stop the recording when ready. Always power off the camera before opening the side door. If you need to swap the battery or memory card during a shoot, power down, make the swap, and power back on.

What if the latch is broken or won't stay closed?

A broken latch means the camera is no longer properly sealed and waterproofing is compromised. Contact GoPro support or visit an authorized repair center. Do not attempt to glue or tape the door shut, as this can damage the hinge or latch further.

Is it normal for the battery to be hard to remove?

Slightly stiff is normal—the spring is designed to hold the battery securely during use. However, it should not require force. If you have to yank or pry, stop and check that you're pressing it straight back and that nothing is blocking the slot.

Can I open the door underwater?

No. Always open the door on dry land. Opening it underwater will flood the camera and destroy the electronics. If you've been recording underwater, let the camera dry completely before opening the door.