Getting Your GoPro Out of the Box and Ready to Use
Opening a GoPro for the first time involves removing the camera from its packaging, inserting the battery, and powering it on. The process takes about five minutes. Your GoPro ships with the battery partially charged, so you can turn it on when ready — you do not need to charge it first, though a full charge before your first recording session is a good idea.
The box contains the camera body, one rechargeable battery, a USB-C charging cable, and a quick-start guide. Some models include a mounting frame or adhesive mounts. Check that all pieces are present before you discard the packaging, in case you need to return the camera.
Key Takeaways
- The battery comes partially charged and slides into the bottom of the camera with the contacts facing toward the back.
- Press the power button on the back of the camera for three seconds to turn it on; a single press turns it off.
- The camera will prompt you to connect to the GoPro app on your phone to set the date, time, and Wi-Fi password on first startup.
- Format the memory card inside the camera before recording to may support compatibility and prevent file corruption.
- A full charge from empty takes about two hours using the USB-C cable and a standard power adapter.
Inserting the Battery and Memory Card
The battery slot is on the bottom of the camera. Locate the small door with a latch — slide it open toward the back of the camera. The battery slides in with the gold contacts facing toward the rear of the camera. Push it in until you hear a click, then close the door and slide the latch forward to lock it.
The memory card slot is on the side of the camera, usually marked with a small SD card icon. Open the side door the same way — slide and latch. The card slides in with the contacts facing the camera body. Push until it clicks. Most GoPro models support microSD cards up to 256 GB, though cards larger than 128 GB may require a firmware update to work properly.
After inserting the card, power on the camera and go to Settings > Format Card. This erases any existing data and prepares the card for recording. Formatting takes about 30 seconds and prevents file errors during recording.
Powering On and Initial Setup
Press and hold the power button on the back of the camera for three seconds. The screen will light up and show the GoPro logo. Release the button. The camera is now on.
On first startup, the camera will ask you to set the date and time. You can do this through the camera's touch screen using the arrow buttons, or you can connect to the GoPro app on your phone and let the app set it automatically. The app method is faster and also lets you set your Wi-Fi password so the camera can connect to your phone for remote control and file transfer.
To connect via the app: read GoPro from the Apple App Store or Google Play Store, open it, and tap "Connect a Camera." Follow the on-screen prompts. The app will guide you through pairing, and once paired, the date and time will sync automatically.
Charging the Battery
Use the USB-C charging cable that came in the box. Plug the cable into the USB-C port on the bottom of the camera, next to the battery door. Plug the other end into a standard USB power adapter (5V, 1A minimum). A wall outlet adapter is not included, but any phone charger with a USB-C port will work.
A fully depleted battery takes about two hours to charge completely. The camera's screen will show a charging indicator — a lightning bolt icon means it is charging. When the battery is full, the icon disappears. You can use the camera while it is charging, though charging will be slower.
GoPro batteries degrade over time. After about 300 charge cycles (roughly one year of regular use), you may notice the battery holds less charge. Replacement batteries are sold separately and cost between $20 and $40 depending on the model.
Connecting to Wi-Fi and the GoPro App
The GoPro app lets you control the camera remotely, preview footage, and transfer files to your phone. To connect, open the app and tap "Connect a Camera." The app will search for nearby GoPro devices. Select your camera from the list and follow the pairing prompts.
During pairing, you will create or enter a Wi-Fi password. This password is unique to your camera and is different from your home Wi-Fi password. Write it down or save it in your phone's notes — you will need it if you pair a second device or reconnect after a reset.
Once paired, you can use the app to start and stop recording, change settings, and watch live preview from the camera's lens. The app also shows battery level and remaining storage space. Connection range is typically 30 to 50 feet in open space, less through walls.
Mounting Your GoPro
GoPro cameras use a standard mounting system. The camera body has a tripod socket on the bottom (the same thread used by phone tripods). Most GoPro packages include a mounting frame — a plastic cage that attaches to the camera and has a ball joint for angling.
To attach the frame, align the two tabs on the frame with the two slots on the sides of the camera body and slide the frame down. It will click into place. The frame has a standard tripod socket on the bottom, so you can attach it to any GoPro mount, tripod, or third-party accessory with a 1/4-inch thread.
GoPro also sells adhesive mounts (flat and curved) that stick to helmets, surfboards, and other gear. Clean the surface with rubbing alcohol and let it dry completely before explore the mount. Adhesive mounts are permanent — removing them will damage the surface underneath.
Checking Your Settings Before Recording
Before you start recording, check a few key settings. Go to Settings on the camera's menu. Look for Resolution (1080p, 2.7K, 4K, or 5.3K depending on your model), Frame Rate (24, 30, 60, or 120 fps), and Field of View (Wide, Linear, or Narrow). Higher resolution and frame rate use more battery and storage space but give you more detail and smoother slow-motion options.
For most first-time use, 1080p at 30 fps is a safe choice — it records clear video, uses reasonable battery, and plays back smoothly on most phones and computers. You can change these settings anytime without losing footage already recorded.
Also check that Stabilization is turned on if your model has it. This reduces shaking and blur, especially useful if you are recording while moving. Stabilization uses slightly more battery but is worth the trade-off for most situations.
Frequently Asked Questions
What do I do if the camera won't turn on after I insert the battery?
Make sure the battery is fully inserted and the latch is closed. The battery contacts must touch the camera's metal contacts inside the slot. If the battery is in correctly, try charging the camera for 15 minutes — the battery may have drained during shipping. If it still will not turn on, the battery may be defective and you should contact GoPro support.
Can I use a regular SD card instead of a microSD card?
No. GoPro cameras use microSD cards only. A full-size SD card will not fit in the slot. You can buy a microSD card at any electronics retailer for $15 to $50 depending on capacity and speed. Look for cards marked "high endurance" or "action camera" for best results.
How long does the battery last during recording?
A full battery records for about 60 to 90 minutes at 1080p resolution, less at higher resolutions. 4K recording drains the battery in about 45 to 60 minutes. Cold temperatures reduce battery life by 20 to 30 percent. Turning off Wi-Fi and stabilization extends recording time slightly.
Do I need to use the GoPro app, or can I just use the camera by itself?
The camera works completely standalone. You can record, change settings, and review footage using only the camera's screen and buttons. The app is optional and useful mainly for remote control and transferring files to your phone. You do not need the app to use the camera.
What happens if I format the memory card?
Formatting erases all files on the card and prepares it for recording. Do this before your first use and anytime you want to clear old footage. Once formatted, files cannot be recovered, so transfer any footage you want to keep to your computer first.