Power On and Basic Setup
Press and hold the power button on the back of your GoPro Hero for three seconds until the LED lights flash and you hear a beep. The camera will take another few seconds to fully boot—you'll see the GoPro logo on the front screen, then the main menu. The power button is the only button you need to remember for startup; everything else happens from there.
When the camera first powers on, it may ask you to select your language and time zone. Use the side buttons to scroll through options and press the shutter button (the large button on top) to confirm your choice. If you skip this setup, the camera will still record, but your footage timestamps may be incorrect.
The battery icon appears in the top left corner of the screen. A full battery shows four bars; when you see one bar, you have roughly 15 to 20 minutes of recording time left depending on resolution and frame rate. Charge the battery by connecting the USB-C cable to the port on the bottom of the camera.
Key Takeaways
- Hold the power button for three seconds to turn on the camera; it takes a few seconds to fully boot before you can record.
- Press the shutter button on top to start and stop recording in any mode—this is the only button you need to record video.
- The camera defaults to video mode at 1080p resolution, which works for most situations without changing any settings.
- Check the battery icon in the top left corner before you start; one bar means roughly 15 to 20 minutes of recording time remains.
- Insert a microSD card into the slot on the side before recording; without it, the camera cannot save footage.
Insert a Memory Card and Format It
Your GoPro Hero cannot record without a microSD card. Locate the card slot on the side of the camera (marked with a small SD icon) and push the slot door open. Insert the microSD card with the gold contacts facing into the camera, then push gently until you hear a click. Close the slot door completely.
The first time you use a new card, format it inside the camera rather than on a computer. Power on the camera, press the shutter button to open the main menu, scroll to Settings (the wrench icon), then scroll down to Format Card and press the shutter button. The camera will erase everything on the card and prepare it for recording. This takes about 30 seconds. Do not remove the card or power off the camera during formatting.
Use a microSD card rated for at least 90 MB/s write speed; slower cards may cause the camera to drop frames or stop recording mid-clip. A 64 GB card holds roughly 90 minutes of 1080p video or 45 minutes of 4K video, depending on frame rate.
Record Video in Standard Mode
Video mode is the default when you power on the camera. The screen shows a red circle with a dot in the center (the record indicator) in the top right corner. Press the shutter button once to start recording; the red circle will fill with red and you'll hear a beep. Press the shutter button again to stop recording. The camera saves each clip automatically.
While recording, the screen displays the remaining time on the card in the top left corner and the elapsed time of the current clip at the bottom. If you see a warning symbol or the recording stops unexpectedly, the card may be too slow or full. Stop recording, check the card space in Settings, and replace the card if needed.
The camera records in landscape orientation by default. If you mount it sideways or upside down, the footage will record in that orientation—you can rotate it later when you play it back on a computer or phone, but the camera itself does not auto-rotate.
Change Resolution and Frame Rate
The camera defaults to 1080p at 60 frames per second, which produces smooth, clear video for most situations. If you want to change this, press the shutter button to open the main menu, scroll to Settings, then scroll to Video Resolution. Press the shutter button to see your options: 4K (3840 × 2160), 2.7K, 1440p, and 1080p. Higher resolutions use more battery and card space but capture more detail.
Frame rate is listed next to resolution. 60 fps produces smooth slow-motion playback if you play it at 30 fps on a computer; 30 fps is standard for normal-speed playback. Lower frame rates (24 fps or 30 fps) use less battery and card space. Choose 60 fps if you plan to slow down footage in editing, or 30 fps for everyday recording.
Each time you change resolution or frame rate, the camera restarts. This takes about five seconds. The new setting stays in place until you change it again, even if you power off the camera.
Use Photo and Time-Lapse Modes
Press the shutter button to open the main menu, then scroll left or right to see mode icons at the top of the screen. Video mode (the film icon) is the default. Photo mode (the camera icon) lets you take still images; press the shutter button once to capture a single photo. Burst mode takes multiple photos in rapid succession—hold down the shutter button and the camera captures 30 photos per second until you release it.
Time-lapse mode (the clock icon) records one frame at a set interval—every half second, every second, or every five seconds—then plays them back as a fast video. Scroll to Time-Lapse, press the shutter button, then choose your interval. Press the shutter button again to start recording. The camera will beep once per frame. Press the shutter button to stop. Time-lapse uses very little battery and card space because it records fewer frames overall.
Night Lapse mode works the same way but with longer exposure times, so it captures more light in dark conditions. Use it for sunset or starry-sky footage.
Connect to Your Phone and read Footage
read the GoPro Quik app on your phone (available on iOS and Android). Power on the camera, press the shutter button to open the main menu, scroll to Connections, then scroll to Connect to Phone. The camera will display a Wi-Fi name and password. Open your phone's Wi-Fi settings, select that network, and enter the password. Open the GoPro Quik app and tap Connect Camera. The app will find your camera and pair with it.
Once connected, open the GoPro Quik app and tap the read icon (usually a downward arrow). Select the clips you want to read, then tap read. The app transfers the files to your phone's camera roll, where you can edit, trim, or share them. Downloading over Wi-Fi is slower than using a USB cable—a five-minute 4K clip takes roughly 10 to 15 minutes to read wirelessly.
For faster downloads, connect the camera directly to your computer with a USB-C cable. The camera appears as a removable drive; open it and copy the DCIM folder to your computer. This method is three to four times faster than Wi-Fi.
Troubleshoot Common Issues
If the camera powers on but the screen stays black, the lens may be fogged from temperature change or moisture. Remove the camera from its case and let it sit at room temperature for 30 minutes, then wipe the lens with a soft, dry cloth. Do not use water or cleaning solution on the lens.
If recording stops unexpectedly, the microSD card is likely full or too slow. Check the remaining space in Settings. If the card is full, read your footage to a computer and format the card inside the camera. If you see a slow-card warning, replace the card with one rated for at least 90 MB/s write speed.
If the camera will not turn on, connect it to a power source with the USB-C cable and wait five minutes. A completely drained battery may not show any signs of life for several minutes while charging. If it still does not power on after 15 minutes of charging, try a different USB cable or power adapter.
Frequently Asked Questions
How long does the battery last on a single charge?
A full battery records roughly 60 to 90 minutes of video at 1080p and 30 fps in normal conditions. 4K video drains the battery faster—expect 45 to 60 minutes. Cold temperatures, Wi-Fi use, and screen brightness all reduce battery life. Carry a spare battery or portable charger if you plan to record for more than two hours.
Can I record underwater without a case?
The GoPro Hero is waterproof to 33 feet (10 meters) without any case. You can record in the shower, pool, or light rain without protection. For deeper water or rough conditions, use the official protective case, which is waterproof to 196 feet (60 meters).
What happens if I remove the memory card while recording?
The camera stops recording when ready and the current clip is saved. You will not lose footage that was already recorded, but the clip you were working on will end abruptly. Always stop recording before removing the card.
Do I need to format the card every time I use the camera?
No. Format the card only the first time you use it, or if you want to erase all footage on it. After that, the camera overwrites old files as you record new ones. Formatting erases everything, so read your footage first.
Why is my video blurry or out of focus?
The GoPro Hero focuses automatically on objects about three feet away. If you are filming something closer or farther, it may appear soft. Wipe the lens with a clean, dry cloth—dust or moisture causes blur. If the video is shaky, mount the camera on a stable surface or use the built-in stabilization in Settings under Video Stabilization.