Power On and Basic Setup

Press and hold the power button on the back of your GoPro Hero for three seconds until you see the GoPro logo appear on the front screen. The camera will beep once and the LED light on the back will turn on. If this is your first time using the camera, it will ask you to select your language and time zone — use the side buttons to navigate and press the shutter button (the large round button on top) to confirm each choice.

Once setup is complete, the camera enters standby mode. You will see the main menu on the front screen showing options like Video, Photo, and Burst. The camera is now ready to record. If the screen goes dark after a few minutes, the camera has entered sleep mode to save battery — press the power button once to wake it.

Key Takeaways

  • Hold the power button for three seconds to turn on the camera; a single beep and lit LED confirm it is powered up.
  • The shutter button (top of the camera) starts and stops recording in video mode, and takes photos in photo mode.
  • Use the side buttons to navigate menus and the front screen to see what mode you are in and battery level.
  • Video records at 1080p by default, but you can change resolution and frame rate in the settings menu before you record.
  • Always check that the SD card is inserted and has free space before you start recording, or the camera will not save footage.

Recording Video

To record video, make sure the camera is in Video mode — you will see a red circle icon on the front screen. Press the shutter button once to start recording. A red dot will appear in the top left corner of the screen and a beeping sound will play. The timer on the screen shows how long you have been recording. Press the shutter button again to stop recording. The video is automatically saved to your SD card.

Your GoPro Hero records at 1080p resolution and 60 frames per second by default, which works well for most situations. If you want to change the resolution or frame rate, go to the settings menu before you start recording. Swipe down on the front screen or press the side button to open the menu, then select Settings and Video. Common options include 4K (higher quality but uses more storage), 720p (lower quality but saves space), and different frame rates like 30 fps for slower motion or 120 fps for slow-motion playback.

Taking Photos and Burst Shots

To take a single photo, swipe left on the front screen until you see the camera icon, or press the side button to cycle through modes until Photo appears. Press the shutter button once to take a photo. The screen will flash white briefly and you will hear a camera click sound. The photo is saved when ready.

For burst mode, which takes multiple photos in rapid succession, stay in Photo mode and press and hold the shutter button. The camera will take photos as fast as it can until you release the button. This is useful for action shots where you want to pick the best frame later. You can also select Burst from the menu and set how many photos per second the camera takes — options range from 3 to 30 photos per second depending on your model.

Adjusting Settings Before Recording

Before you record, check your resolution, frame rate, and field of view. Swipe down on the front screen to open the menu, then tap Settings. Video settings control resolution (1080p, 2.7K, 4K) and frame rate (24, 30, 60, 120 fps). Photo settings let you choose single photo, burst, or time-lapse mode. Field of view options include Wide (captures more of the scene), Linear (reduces distortion), and Narrow (zooms in slightly).

Battery life depends on resolution and frame rate — 4K at 60 fps drains the battery faster than 1080p at 30 fps. If you are recording for a long time, use 1080p or 2.7K to extend battery life. You can also turn off the front screen to save power — press the power button while the camera is on to toggle the screen off and on.

Checking Battery and Storage

The battery percentage appears in the top right corner of the front screen. A full charge typically lasts 60 to 90 minutes of continuous 1080p recording, depending on temperature and settings. If the battery is low, the screen will show a warning. Always charge your camera before a full day of shooting, or carry a spare battery.

The SD card icon appears in the top left corner of the screen. If you see a warning that says "No SD Card" or "SD Card Full," you cannot record. Insert a compatible microSD card (the GoPro Hero works with cards up to 256 GB) or delete old footage to free up space. You can delete videos and photos directly on the camera by opening the gallery, selecting a file, and pressing delete, or you can connect the camera to a computer and manage files there.

Connecting to WiFi and Transferring Footage

To transfer videos and photos to your phone or computer, you can connect via WiFi or use a USB cable. For WiFi, open the menu, go to Connections, and turn on WiFi. The camera will display a network name and password. On your phone, open the GoPro app, select your camera from the list, and enter the password. Once connected, you can view footage on your phone and read files.

For a wired connection, use the USB-C cable that came with your camera. Plug one end into the camera and the other into your computer. The camera will appear as a removable drive. Navigate to the DCIM folder to find your videos and photos, then copy them to your computer. This method is faster for transferring large files than WiFi.

Powering Off and Storage

To turn off the camera, press and hold the power button for three seconds. The screen will go dark and the LED light on the back will turn off. The camera is now powered down and will not drain the battery. If you plan to store the camera for more than a few weeks, remove the battery and store it separately in a cool, dry place — this extends battery lifespan.

Always remove the SD card before storing the camera for long periods. Keep the camera in a dry location away from extreme heat or cold. If the camera gets wet, dry it completely before powering it on again. The GoPro Hero is water-resistant to 33 feet without a housing, but freshwater only — saltwater can damage the camera unless you rinse it with fresh water when ready after use.

Frequently Asked Questions

Why is my GoPro not turning on?

The battery may be completely drained. Plug the camera into a USB charger and wait at least 30 minutes before trying again. If the camera still does not turn on, try a different USB cable or charger — the original cable sometimes fails. Hold the power button for a full three seconds; a quick press will not work.

How do I know if my SD card is compatible?

The GoPro Hero works with microSD cards rated Class 10 or UHS-II, up to 256 GB. SanDisk, Samsung, and Kingston cards are commonly used. Insert the card into the slot on the side of the camera with the gold contacts facing inward. The camera will format the card automatically on first use, which erases any existing data.

Can I record while the camera is charging?

Yes, you can record while the camera is plugged in. The camera will charge while you record, though charging will be slower if the camera is actively recording video. For long recording sessions, plug the camera in and let it charge between takes.

What does the blinking red light mean?

A blinking red light on the back of the camera means the battery is low. You have roughly 10 to 15 minutes of recording time left. Plug the camera in to charge, or stop recording and power off to preserve the remaining battery.

How do I delete a video I just recorded?

Press the power button to wake the screen if it is dark. Swipe left to open the gallery, find the video you want to delete, and press the delete button (trash icon). Confirm the deletion when prompted. The video is permanently removed from the SD card.