Power On and Basic Controls
The GoPro Hero 5 powers on with a single press of the power button on the back of the camera, just below the screen. Hold it for two seconds until you see the GoPro logo appear on the display. The camera will beep once and the LED light on the front will flash red, then turn solid red when it is fully booted—this takes about five seconds.
Once the camera is on, you control it three ways: the touchscreen on the back, the physical buttons on the side, and voice commands. For most people starting out, the touchscreen is the easiest. Tap the red record button in the center of the screen to begin recording video. Tap it again to stop. The camera will save the file automatically.
If the screen is off but the camera is powered on, press the power button once to wake the display. If you want to turn the camera completely off, hold the power button for three seconds until the screen goes black and the front LED turns off.
Key Takeaways
- Press the power button on the back for two seconds to turn on the camera; it will show the GoPro logo and beep when ready.
- Tap the red record button on the touchscreen to start and stop video recording.
- The camera saves files automatically; you do not need to manually save or confirm each recording.
- Use the Mode button on the side to switch between video, photo, burst, time-lapse, and slow-motion modes without touching the screen.
- Hold the power button for three seconds to shut down the camera completely.
Switching Between Recording Modes
The Hero 5 has five main recording modes, and you switch between them using the Mode button on the left side of the camera. Press it once to cycle to the next mode. The screen will display which mode you are in: Video, Photo, Burst, Time-Lapse, or Slow-Mo.
Video mode is the default and records standard footage at your chosen resolution and frame rate. Photo mode takes a single still image each time you press the shutter button. Burst mode captures multiple photos in rapid succession—useful for action shots where you want to pick the best frame later. Time-Lapse records one frame at set intervals, then plays them back quickly to show motion over time. Slow-Mo records at a higher frame rate so that when played back at normal speed, the action appears slowed down.
Each mode has its own settings. When you switch modes, the camera remembers the last settings you used for that mode. For example, if you set Video to 1080p resolution and then switch to Photo mode, when you come back to Video it will still be at 1080p.
Adjusting Resolution and Frame Rate
Resolution and frame rate control how sharp your video is and how smooth the motion looks. To change these settings, swipe down from the top of the touchscreen to open the quick settings menu, or tap the gear icon to open the full settings menu.
In Video mode, common resolution options are 4K (highest quality, largest file size), 2.7K, 1440p, and 1080p (smallest file size, easiest to share). Frame rate options are typically 24, 30, 60, and 120 frames per second. Higher frame rates make motion smoother and are better for slow-motion playback, but they create larger files. If you are recording on a smaller memory card, use 1080p at 30 fps to save space.
The camera will warn you if your memory card is too slow for your chosen settings. A Class 10 or UHS-3 memory card is recommended for all modes. If you see a warning, either upgrade your card or lower your resolution and frame rate.
Using the Touchscreen and Physical Buttons
The touchscreen on the back is your main control panel. Tap the red record button in the center to start and stop recording. Swipe left or right to scroll through your recorded files. Swipe down from the top to see quick settings like battery level, recording time remaining, and resolution. Swipe up from the bottom to see playback options.
The physical buttons on the side are useful when the screen is off or when you are wearing gloves. The Mode button cycles through recording modes. The shutter button (the large button on top) starts and stops recording, or takes a photo depending on your current mode. You can also use voice commands by saying "GoPro, start recording" or "GoPro, take a photo," though voice control works best in quiet environments.
If the touchscreen becomes unresponsive, try restarting the camera by holding the power button for three seconds, waiting five seconds, then pressing power again to turn it back on.
Connecting to WiFi and Using the GoPro App
The GoPro Hero 5 can connect to your phone or tablet via WiFi using the official GoPro app. This lets you preview what the camera sees, control recording remotely, and transfer files to your phone. To set up the connection, open the GoPro app on your phone, tap the camera icon, and select "Connect a Camera."
On the Hero 5, swipe down from the top of the screen to open quick settings and tap the WiFi icon. The camera will display a network name and password. Enter these into your phone's WiFi settings, then return to the GoPro app. The app will connect and show a live preview from the camera's lens.
Once connected, you can tap the record button in the app to start recording, or use your phone as a remote viewfinder. The app also shows you battery level, remaining storage, and lets you read videos directly to your phone. The connection range is typically 30 to 50 feet in open space.
Managing Battery and Memory
The Hero 5 comes with a rechargeable battery that lasts roughly 60 to 90 minutes of continuous recording, depending on resolution and temperature. Cold weather drains the battery faster. You can check battery level by looking at the icon in the top left of the touchscreen.
Charge the camera using the USB-C cable included in the box. Plug the cable into the port on the bottom of the camera and connect it to a USB power adapter or computer. The camera will show a charging icon on the screen. A full charge takes about two hours. You can also charge the battery separately if you remove it from the camera, though the Hero 5 does not ship with a separate charger.
Storage depends on your memory card size and recording resolution. A 64 GB card will hold roughly 90 minutes of 4K video or 4 hours of 1080p video. Check remaining storage by looking at the storage icon on the screen. When the card is full, the camera will stop recording. Always carry a second memory card if you plan to record for extended periods.
Troubleshooting Common Issues
If the camera will not turn on, the battery may be completely drained. Plug it in and charge for at least 30 minutes, then try again. If it still does not power on, try a hard reset: hold the power button for 10 seconds, release it, wait 10 seconds, then press power again.
If the screen is frozen or unresponsive, restart the camera by holding power for three seconds to shut it down, waiting five seconds, then pressing power to turn it back on. If the camera is recording but the video looks blurry or out of focus, make sure the lens is clean. Wipe it gently with a soft, dry cloth. If you are recording in very bright sunlight, the camera may automatically reduce exposure; this is normal.
If files are corrupting or the camera is freezing during recording, your memory card may be too slow or failing. Try formatting the card in the camera (Settings > Format Card) or replacing it with a new Class 10 or UHS-3 card. Formatting will erase everything on the card, so transfer your files first.
Frequently Asked Questions
How long does the battery last on a single charge?
The Hero 5 battery lasts roughly 60 to 90 minutes of continuous recording at standard settings. Cold weather, high resolution (4K), and high frame rates (60 fps or higher) all reduce battery life. Carrying a second battery or a portable charger is practical if you plan to record all day.
Can I record while the camera is charging?
Yes. The Hero 5 can record while plugged into a USB power source. This is useful for long recording sessions or live streaming. Connect the USB cable to a power bank or wall adapter and the camera will draw power from the source while also charging the internal battery.
What memory card do I need?
Use a Class 10 or UHS-3 memory card with at least 64 GB capacity. SanDisk Extreme, Samsung EVO, and Lexar are reliable brands. Avoid cheap or very old cards; they may be too slow and cause the camera to drop frames or freeze during recording.
How do I delete videos from the camera?
Swipe left or right on the touchscreen to browse your files. Tap and hold a video thumbnail until a trash icon appears, then tap the trash icon to delete it. You can also delete files through the GoPro app after connecting via WiFi. Deleted files cannot be recovered, so transfer important videos to your computer first.
Can I use the Hero 5 underwater?
Yes. The Hero 5 is waterproof to 33 feet (10 meters) without a housing. For deeper water or extra protection, you can purchase an optional protective housing. Always rinse the camera with fresh water after saltwater use to prevent corrosion.