The SD card slot is on the side of your GoPro, and insertion takes about 30 seconds

Your GoPro stores video and photos on a removable SD card. To insert one, locate the small door on the side of your camera body — the exact location depends on your model, but it is always marked with a small SD icon. Open that door by sliding or unlatching it (the method varies by model), then push the SD card into the slot at a slight angle until you hear or feel a click. The card is now locked in place. Close the door to protect the slot from water and dust.

The entire process is the same whether you are using a new card or replacing an old one. If your GoPro does not recognize the card after insertion, the card may need to be formatted inside the camera itself — most GoPro models do this automatically on first use, but some require you to format it manually through the camera's menu.

Key Takeaways

  • The SD card slot is located on the side of your GoPro body and is marked with a small SD icon on the door.
  • Push the card in at a slight angle until you hear or feel a click, which means it is fully seated and locked.
  • Always close the protective door after insertion to keep the slot dry and free of debris.
  • If your GoPro does not recognize the card, format it through the camera's menu — this erases any existing data and prepares it for use.
  • Most GoPro models work with microSD cards, but check your manual to confirm the exact card type your model requires.

Which side of the camera has the SD slot

The SD card door is always on the side of your GoPro, never on the bottom or back. On most recent models — Hero 11, Hero 10, Hero 9 — the slot is on the left side when you are holding the camera with the lens facing away from you. On older models like the Hero 8 and Hero 7, it is also on the left side. The door itself is small and rectangular, roughly the size of a postage stamp.

Look for the tiny SD icon printed or embossed on the door. If you cannot find it, consult your camera's quick-start guide or the manufacturer's website for your specific model number. The model number is printed on the bottom or back of the camera body.

How to open the SD card door

The method for opening the door depends on your GoPro model. On Hero 11, Hero 10, and Hero 9 models, the door slides open — push it gently toward the back of the camera until it stops, then lift it away from the body. On Hero 8 and earlier models, the door typically has a small latch or tab that you pull outward or downward to release it.

Do not force the door. If it does not move easily, you may be pushing in the wrong direction. Refer to your manual if you are unsure. Once open, you will see a small rectangular slot inside. This is where the SD card goes.

Inserting the card at the correct angle

Hold the SD card with the label facing toward the back of the camera and the metal contacts facing into the slot. Push the card in at a shallow angle — about 30 to 45 degrees — rather than straight in. The card will slide into the slot smoothly if the angle is correct.

Continue pushing until you hear a soft click or feel the card lock into place. This click means the card is fully seated. If you do not hear or feel anything after pushing gently, stop and check the angle. Forcing the card can damage both the card and the camera slot.

Closing the door and protecting the slot

After the card is inserted and locked, close the protective door. Slide it back into place (on newer models) or push the latch down until it clicks (on older models). The door should sit flush with the camera body with no gaps. A properly closed door keeps water, sand, and dust out of the slot, which is important even if your GoPro is waterproof.

Check that the door is fully closed before you take the camera into the water or expose it to dusty conditions. A partially open door can allow water to seep into the slot and damage the camera's internal components.

What to do if your GoPro does not recognize the card

If you insert the card and the camera displays an error message or does not show any storage space, the card likely needs to be formatted. Formatting prepares the card for use with your specific GoPro model and erases any data already on it. On most GoPro models, you can format the card through the camera's menu — look for a Settings or Tools option, then select Format SD Card or similar wording.

Formatting usually takes less than a minute. After it completes, the camera should recognize the card and be ready to record. If the camera still does not recognize the card after formatting, the card itself may be faulty or incompatible with your model. Check your manual to confirm that your card meets the camera's specifications — most GoPro models require a microSD card with a minimum speed rating of U3 or V30.

Removing the SD card when you need to

To remove the card, open the SD card door using the same method you used to open it for insertion. Gently push the card into the slot — it will spring back out slightly. Catch it as it ejects and pull it the rest of the way out. Close the door when ready to protect the slot.

Never remove the card while the camera is recording or while it is powered on. Doing so can corrupt the files on the card or damage the camera's file system. Always power off the camera first, wait a few seconds, then remove the card.

Frequently Asked Questions

Can I use a regular SD card or does it have to be a microSD card?

Most GoPro models use microSD cards, not full-size SD cards. Check your camera's manual to confirm which type your model requires. Using the wrong size will not fit into the slot and can damage the camera if you force it.

What happens if I insert the card upside down?

The card will not fit into the slot if it is upside down. The metal contacts must face into the camera. If the card does not slide in smoothly, stop and flip it over. Do not force it.

Do I need to format a brand-new SD card before I use it?

Most GoPro models format a new card automatically the first time you insert it. Some older models may require you to format it manually through the camera menu. Either way, formatting erases any existing data, so back up anything important before you insert a used card.

Can I remove the SD card while the camera is on?

No. Always power off the camera and wait a few seconds before removing the card. Removing it while the camera is on or recording can corrupt your files and damage the camera's file system.

What should I do if the SD card door is stuck?

Do not force it. Check that you are pushing or pulling in the correct direction for your model — refer to your manual if you are unsure. If the door still will not budge, the hinge or latch may be damaged. Contact GoPro support or visit an authorized repair center.