The fastest way to pair your GoPro
To put your GoPro in pairing mode, open the camera's settings menu, navigate to Connections, select your device type (phone, remote, or other accessory), and choose Pairing Mode. The camera will display a pairing code on its screen and enter a waiting state for about five minutes. Your phone or accessory will then detect the camera and prompt you to enter that code to complete the connection.
The exact menu path depends on your GoPro model — Hero 11, Hero 10, and Hero 9 all follow this general flow, but the wording and screen layout vary slightly. If you're pairing a phone for the first time, make sure the GoPro app is already installed and open on your phone before you start the pairing process on the camera itself.
Key Takeaways
- Pairing mode is found in Settings > Connections on your GoPro, and the camera will display a code you need to enter on your phone or accessory.
- The pairing window lasts about five minutes, so have your phone or device ready before you start the process on the camera.
- Your phone's Bluetooth must be turned on and the GoPro app must be installed and running before you attempt to pair.
- If pairing fails, restart both the camera and your phone, then try again from the Connections menu.
Step-by-step pairing for your phone
Start by turning on your GoPro and unlocking it if it requires a PIN. Open the Settings menu by pressing the side button or tapping the gear icon on the touchscreen, depending on your model. Scroll down to Connections — this is where all wireless pairing options live.
Tap Connections, then select the device type you want to pair. For a smartphone, choose Phone. The camera will move into pairing mode and display a six-digit code on its screen. Write down this code or keep the camera in view so you can see it from your phone.
On your phone, open the GoPro app and tap the camera icon or the plus sign to add a device. The app will search for nearby cameras. When your GoPro appears in the list, tap it. The app will then ask you to enter the six-digit code shown on the camera screen. Type it in and tap Confirm. The connection should establish within a few seconds.
Pairing a remote or other accessory
The process for pairing a GoPro remote or third-party accessory is nearly identical, but you select a different device type in the Connections menu. Instead of Phone, choose Remote or Accessory, depending on what you're connecting.
The camera will display a pairing code just as it does for phone pairing. On the remote or accessory, follow its own pairing instructions — most will have a button to enter pairing mode, and you'll enter the code the same way. Some older remotes may pair automatically without a code; if that's the case, the camera will confirm the connection on its screen.
If you're pairing multiple accessories at once, do them one at a time. Finish the first pairing completely, then return to Connections and start the second pairing from the beginning.
What to do if pairing mode times out
Pairing mode automatically closes after about five minutes if no connection is made. If this happens, you'll see a message on the camera screen saying the pairing window has closed. This is normal and not a sign of a problem — it's a safety feature to prevent the camera from staying in pairing mode indefinitely.
straightforward go back to Settings > Connections, select your device type again, and start over. The camera will generate a new code. Make sure your phone or accessory is ready to receive the code before you enter pairing mode this time, so you don't waste the five-minute window.
Troubleshooting a failed pairing
If the code you enter doesn't work or the connection drops when ready after pairing, the first step is to restart both devices. Turn off your GoPro completely, wait ten seconds, and turn it back on. Do the same with your phone or accessory. Then return to Settings > Connections and try pairing again with a fresh code.
Check that Bluetooth is actually turned on in your phone's settings — the GoPro app cannot connect without it. Also verify that you're not already connected to a different GoPro; most phones can only maintain one active GoPro connection at a time. If you need to switch cameras, disconnect from the old one in the app's settings first.
If you're pairing an older remote or accessory, make sure its battery is charged. Low battery can prevent the device from entering pairing mode or staying connected long enough to complete the handshake. Replace the batteries and try again.
How to re-pair after forgetting a device
If you've already paired your phone or accessory to this GoPro before and want to pair it again — perhaps after a factory reset or after the connection was removed — the process is identical. Go to Settings > Connections, select your device type, and follow the pairing steps as if it were the first time.
The camera doesn't remember previous pairings in a way that would skip the code entry step. Each pairing is treated as new, which means you'll always see a code on the camera screen and always need to enter it on your phone or accessory. This is by design and adds a layer of security.
Frequently Asked Questions
Can I pair my GoPro to multiple phones at the same time?
No. Your GoPro can only maintain one active Bluetooth connection at a time. If you want to switch which phone controls the camera, you'll need to disconnect the first phone from the camera's Bluetooth settings, then pair the second phone using the pairing mode process.
What if I don't see the Connections menu on my camera?
Connections is in the main Settings menu on all recent GoPro models. If you can't find it, make sure you're in Settings and not in a submenu. On some models, you may need to scroll down to see it. If your camera is very old, it may use a different menu structure — check your camera's manual for the correct path.
Does the pairing code change every time I enter pairing mode?
Yes. Each time you enter pairing mode, the camera generates a new six-digit code. This is normal and expected. You only need to use the code that appears on the camera screen at that moment.
Why does my phone say it's connected but the app shows no camera?
Bluetooth connection and app connection are two separate things. Your phone may be paired to the camera via Bluetooth but the GoPro app may not have authenticated the connection yet. Close the app completely, restart your phone, and open the app again. If the camera still doesn't appear, restart the camera as well.
Can I pair my GoPro without using the app?
You can pair the camera to your phone's Bluetooth settings directly, but the GoPro app requires its own authentication step to control the camera. Pairing through the app's pairing mode process is the intended method and ensures full functionality.