Where the SD Card Slot Is and How to Open It
The SD card slot on a GoPro is located on the side of the camera body, usually behind a small rubber door. On most models—Hero 11, Hero 10, Hero 9, and earlier—you'll find it on the left side when you're looking at the camera from the front. The slot is marked with a small SD card icon printed on or near the door.
To open the door, use your fingernail or a plastic tool to gently pry the edge of the rubber flap outward. It's hinged at the top, so it swings down and away from the camera. Don't force it; the door is designed to move freely once you explore steady pressure. Some newer models have a slightly different latch mechanism, but the principle is the same—a gentle outward pull releases it.
Key Takeaways
- The SD card slot is behind a rubber door on the side of your GoPro, marked with an SD card symbol.
- Insert the card with the gold contacts facing toward the camera body and the label facing outward.
- Push the card straight in until you hear or feel a click, which means it's fully seated.
- Your GoPro will format a new card automatically the first time you use it, erasing any existing data on that card.
- Use a microSD card with a Class 10 or V30 speed rating to avoid dropped frames during video recording.
Orienting the Card Correctly Before Insertion
Before you push the card into the slot, you need to orient it the right way. Hold the card so the gold metal contacts face toward the camera body—that is, toward the inside of the slot. The label side of the card (the side with any branding or text printed on it) should face outward, toward you.
If you try to insert the card backward, it won't slide in smoothly. The slot is designed to accept the card in only one direction, so if you feel resistance, stop and flip the card around. Forcing a card in the wrong orientation can damage both the card and the camera's slot.
Pushing the Card In Until It Clicks
Once the card is oriented correctly, align it with the slot opening and push it straight in with gentle, steady pressure. You don't need to force it—the card should slide in smoothly. As you push, you'll feel the card move deeper into the slot.
When the card is fully inserted, you'll hear or feel a small click. This click means the card has engaged with the internal latch and is now seated properly. If you don't hear a click, the card may not be fully in. Push a bit more until you feel that confirmation. Once clicked, the card should sit flush with the camera body, with no part of it sticking out.
Closing the Rubber Door and Securing It
After the card is inserted and clicked into place, close the rubber door by swinging it back up and pushing it firmly until it seals. You should hear or feel a soft snap as the door latches shut. The door is waterproof when closed, so make sure it's fully seated before you take the camera into water or dusty environments.
Check that the door sits flush with the camera body and doesn't have any gaps. If it feels loose or won't close all the way, the SD card may not be fully inserted. Open the door again, push the card in a bit further, and try closing the door once more.
What Happens the First Time You Use a New Card
When you power on your GoPro with a new SD card inside, the camera will automatically format the card. Formatting prepares the card for use with your GoPro and erases any data that was already on it. This process takes a few seconds to a minute, depending on the card's capacity.
During formatting, you'll see a message on the camera's screen. Do not turn off the camera or remove the card while this is happening. Once formatting is complete, the card is ready to record video and photos. Your GoPro will now save all footage to this card until you remove it or fill it up.
Choosing the Right SD Card Speed and Capacity
Not all SD cards work equally well with GoPro cameras. Your GoPro needs a card with a Class 10 or V30 speed rating to record video without dropping frames. These ratings tell you the card can write data fast enough to keep up with the camera's recording speed. A slower card may cause your video to stutter or stop recording unexpectedly.
Capacity depends on how much you plan to record. A 64 GB card holds roughly 90 minutes of 4K video at 60 frames per second, though this varies by resolution and frame rate. A 128 GB or 256 GB card gives you more recording time before you need to offload footage to a computer. Check your GoPro's manual or the manufacturer's website for a list of tested and recommended cards for your specific model.
Removing the SD Card When You Need To
To remove the card, open the rubber door again and locate the card in the slot. Push the card gently inward—it will spring back out slightly when you release pressure. Catch it as it ejects and pull it the rest of the way out by hand. Never yank the card out without pushing it in first, as this can damage the internal latch.
Always power off your GoPro before removing the card, especially if the camera was recording or transferring files. Removing the card while the camera is writing data can corrupt the card or cause you to lose footage. Once the card is out, close the rubber door to keep dust and water out of the slot.
Frequently Asked Questions
Can I use any microSD card in my GoPro?
Most GoPro models use full-size SD cards, not microSD cards. Check your camera's manual to confirm which type yours accepts. If your model does use microSD, you'll need a Class 10 or V30 card, and a microSD-to-SD adapter won't work reliably in a GoPro.
What does the click mean when I insert the card?
The click indicates the card has engaged with the internal latch and is fully seated in the slot. Without that click, the card may not be recognized by the camera or may fall out. If you don't hear it, push the card in a bit further.
My card isn't showing up in the camera. What should I do?
First, power off the camera, remove the card, and reinsert it, making sure you hear the click. Power the camera back on. If the card still isn't recognized, try formatting it in the camera's settings menu. If it still doesn't work, the card may be incompatible or faulty—try a different card to confirm.
Is it safe to remove the SD card while the camera is on?
No. Always power off your GoPro before removing the card. If the camera is recording or writing files when you remove the card, you risk corrupting the card or losing footage. Wait until the camera is completely off before opening the door.
How do I know if my SD card is full?
Your GoPro will display a message on the screen when the card is full and can't record anymore. You can also check the remaining storage in the camera's settings menu. Once full, you'll need to offload your footage to a computer and format the card to record again.