Where the SD card slot is and how to open it

The SD card slot on a GoPro is located on the side of the camera body, usually behind a small rubber door. On most models—Hero 11, Hero 10, Hero 9, and earlier—you'll find it on the left side when you're looking at the camera from the front. The door is held closed by friction; you don't need a tool to open it.

To open the door, use your fingernail or a plastic tool to gently pry the edge of the rubber flap away from the camera body. It will pop out slightly. Once it's loose, pull it open fully to expose the slot underneath. The door is designed to stay attached to the camera with a hinge, so you won't lose it.

If you're using a GoPro Max or a newer model like the Hero 12, check your manual because the slot location may differ slightly. The principle is the same, but the exact position varies by model year.

Key Takeaways

  • The SD card slot is behind a rubber door on the side of your GoPro, opened by gently prying with your fingernail or a plastic tool.
  • GoPro cameras require a microSD card, not a full-size SD card, and the card must be inserted with the gold contacts facing into the camera.
  • Push the card straight in until you hear or feel a click, which means it is fully seated and locked in place.
  • Your GoPro will format the card automatically the first time you use it, erasing any existing data on the card.
  • Always power off your camera before inserting or removing the card to avoid corrupting files or damaging the card.

Which type of SD card your GoPro needs

GoPro cameras use a microSD card, not a standard full-size SD card. This is a smaller format, roughly the size of a postage stamp. If you buy a regular SD card by mistake, it will not fit in the slot.

When shopping, look for cards labeled microSD, microSDHC, or microSDXC. All three formats work in GoPro cameras. The difference is storage capacity: microSD cards hold up to 2 GB, microSDHC cards hold 4 GB to 32 GB, and microSDXC cards hold 64 GB and larger. For modern GoPro models recording in high resolution, a 128 GB or 256 GB card is practical because 4K video consumes storage quickly.

GoPro recommends using cards with a minimum write speed of 60 MB/s for smooth recording. Cards rated V30 or U3 meet this standard. Slower cards may cause the camera to drop frames or stop recording unexpectedly during high-bitrate video.

How to insert the card correctly

Once the rubber door is open, you'll see the slot. Hold the microSD card with the gold contacts facing toward the camera body—this is the side that makes electrical contact with the camera. The label side of the card faces outward, away from the camera.

Insert the card straight into the slot at a slight angle, pushing gently but firmly. You'll feel resistance as the card slides in. Keep pushing until you hear or feel a distinct click. That click means the card is fully seated and locked into the spring-loaded holder. If you push without hearing a click, the card is not fully inserted and may not be recognized by the camera.

Do not force the card. If it resists, stop and check that the gold contacts are facing the right direction. Forcing a card in the wrong orientation can damage both the card and the camera's slot.

What happens when you insert a new card

The first time you insert a new microSD card into your GoPro, the camera will offer to format it. Formatting erases everything on the card and prepares it for use with the camera. This is normal and necessary—you should format the card in the camera rather than on a computer, because the camera creates a file structure optimized for video recording.

If the card already contains files from another device, formatting will delete them. If you need to keep those files, copy them to a computer before inserting the card into the GoPro. Once formatted, the card is ready to record.

Your GoPro will display the remaining storage space on the screen after formatting. If the camera does not recognize the card at all, try removing it, waiting a few seconds, and reinserting it. If it still doesn't work, the card may be faulty or incompatible.

Removing the card safely

To remove the card, power off your GoPro first. This prevents the camera from writing data to the card while you're removing it, which could corrupt files or damage the card. Once the camera is off, open the rubber door again.

You'll see the card sticking out slightly from the slot. Push the card gently inward—it will click and spring back out. Catch it as it ejects and pull it the rest of the way out by hand. Do not yank the card out without pushing it in first, because the spring mechanism is designed to help you remove it safely.

Troubleshooting a card that won't insert or isn't recognized

If the card won't slide into the slot, check the orientation of the gold contacts. They must face the camera body. Also check that you're inserting the card into the correct slot—some GoPro models have a USB port nearby that looks similar but is not the card slot.

If the card inserts but the camera doesn't recognize it, try formatting the card in the camera using the Settings menu. If the camera still doesn't see it, the card may be incompatible or faulty. Test the card in another device if you have one available. If it works elsewhere, the camera's slot may need service.

Cards that are very old or very cheap sometimes have compatibility issues with GoPro cameras. If you're having persistent problems, try a different brand or model of microSD card, preferably one rated V30 or higher.

Frequently Asked Questions

Can I use a full-size SD card in my GoPro?

No. GoPro cameras use microSD cards only. A standard SD card is too large and will not fit in the slot. You must buy a microSD card specifically.

Do I need to format the card before using it?

Your GoPro will format the card automatically the first time you insert it. You do not need to format it beforehand on a computer. Let the camera handle it to may support the card works properly.

What happens if I remove the card while the camera is recording?

Removing the card during recording will stop the recording when ready and may corrupt the video file. Always power off the camera before removing the card.

How do I know if my card is fully inserted?

You should hear or feel a click when the card is fully seated. If you don't hear a click, push it in a bit further. The card should sit flush with the slot opening, not sticking out.

Can I use the same card in multiple cameras?

Yes, but you'll need to format the card in each camera before using it. Formatting erases the card, so transfer your videos to a computer first if you want to keep them.