Connect your Sena helmet communication system to your GoPro
You can record audio from your Sena helmet communicator directly into your GoPro by using the camera's external microphone input. Most GoPro models with a USB-C port support an external microphone adapter, which lets you plug in a Sena audio cable or a compatible third-party adapter. The audio records to your GoPro's memory card alongside your video footage, so you get a single file with both video and Sena communication audio.
The exact method depends on which GoPro model you own and which Sena unit you have. Some setups require a straightforward cable connection; others need an intermediate adapter. Before you start, check that your GoPro has a USB-C port — older models with micro-USB or proprietary connectors cannot use standard external microphone adapters.
Key Takeaways
- GoPro cameras with USB-C ports can record external audio from a Sena communicator using a microphone adapter cable.
- You will need either a Sena audio output cable or a USB-C to 3.5mm microphone adapter, depending on your Sena model.
- Audio records directly to your GoPro's memory card as part of the video file, so no separate recording device is needed.
- Test your audio levels before a ride to make sure the Sena signal is loud enough and not distorted.
What cable or adapter you need
Sena communicators output audio through different connectors depending on the model. The most common Sena units (like the 50S and 20S) have a 2.5mm audio jack on the device itself. You can run a 2.5mm-to-3.5mm cable from that jack to a USB-C microphone adapter, which then plugs into your GoPro's USB-C port.
If your Sena model does not have a 2.5mm jack, check whether it has a charging dock or cradle with audio output pins. Some Sena docks include a 3.5mm headphone output that you can connect directly to a USB-C microphone adapter. The GoPro Media Mod (an official GoPro accessory) also includes a built-in 3.5mm microphone input, which simplifies the connection if you already own one.
You can purchase USB-C to 3.5mm microphone adapters from electronics retailers for $15 to $30. Make sure the adapter is labeled as supporting microphone input, not just headphone output — the direction of audio flow matters. Some adapters only work one way.
How to physically connect the Sena to your GoPro
Turn off both your GoPro and your Sena communicator before making any connections. Locate the 2.5mm audio jack on your Sena unit (usually on the side or bottom). Plug one end of a 2.5mm-to-3.5mm cable into that jack.
Plug the 3.5mm end of the cable into your USB-C microphone adapter. Then plug the USB-C connector into your GoPro's USB-C port, which is typically on the bottom or side of the camera depending on the model. Once everything is connected, turn on your Sena first, then your GoPro. The GoPro should recognize the external microphone automatically.
If you are using a GoPro Media Mod, the 3.5mm jack is built into the mod itself. Connect your Sena cable directly to that jack, and the mod handles the USB-C connection to the camera.
Configuring audio input in your GoPro settings
Open your GoPro's settings menu and navigate to the audio or microphone section. The exact menu path varies by GoPro model, but it is usually under Preferences or Audio Settings. Look for an option labeled "External Microphone" or "Microphone Input" and make sure it is turned on.
Some GoPro models let you choose between internal and external microphone, or allow both to record at once. If you want only the Sena audio (not wind noise from the internal mic), select external microphone only. If you want both the Sena communication and ambient sound, you may be able to enable both inputs — check your camera's manual to see if this option exists for your model.
Save your settings and do a short test recording before you ride. Play it back on the camera or on your computer to confirm that the Sena audio is coming through clearly and at a reasonable volume level.
Testing audio levels before you ride
Record 30 seconds of test footage while your Sena is transmitting. Have a riding partner speak through the communicator, or play back a recording through your Sena so you can hear what the GoPro is capturing. Play back the test video on your GoPro's screen or transfer it to a computer to listen carefully.
If the audio is too quiet, you may need to adjust the input level in your GoPro's audio settings if that option is available. Not all GoPro models have a manual gain control for external microphones, so you may instead need to increase the volume on your Sena communicator itself or move the microphone input cable to a different position on the Sena unit.
If the audio is distorted or crackling, the signal may be too loud. Lower the Sena volume or check that the cable connection is find and not damaged. A loose connection often causes crackling or intermittent audio dropout.
Common problems and how to fix them
No audio is recording at all. First, confirm that your GoPro recognizes the external microphone by checking the audio settings menu — it should show "External Microphone" as active. If it does not, try unplugging and replugging the USB-C adapter. If the camera still does not recognize it, the adapter may not be compatible with your GoPro model. Check the adapter's product page to confirm it works with your specific camera.
Audio is very quiet or barely audible. Check that the Sena volume is turned up on the communicator itself. Some Sena units have a separate volume dial for audio output. You can also try moving the cable connection to a different audio jack on the Sena if your model has multiple outputs. If your GoPro has a microphone gain setting, increase it to the highest level.
Audio cuts out or drops during recording. A loose cable connection is the most common cause. Unplug the 2.5mm cable from the Sena and plug it back in firmly. If the problem persists, the cable itself may be damaged — try a different cable if you have one available. Also check that the USB-C adapter is fully seated in the GoPro's port.
You hear your own Sena audio in the recording but not other riders. This usually means the Sena is recording its own microphone input instead of the intercom signal. Check your Sena's audio output settings — some models let you choose between recording the intercom, your own mic, or both. Select the intercom-only option if available.
Frequently Asked Questions
Can I record Sena audio on a GoPro without a USB-C port?
No. GoPro models with micro-USB or proprietary connectors do not support standard external microphone adapters. If you have an older GoPro, you would need to record Sena audio on a separate device like a smartphone or a dedicated audio recorder and sync it with your GoPro footage in post-production.
Will recording external audio drain my GoPro battery faster?
Using an external microphone draws a small amount of additional power from the USB-C port, but the effect on battery life is minimal — usually less than 5 to 10 percent shorter recording time. If you are on a long ride, bring a spare battery or a portable charger.
Can I record Sena audio and wind noise at the same time?
Some GoPro models allow you to record from both the external microphone and the internal microphone simultaneously, which would capture both Sena communication and ambient sound. Check your camera's audio settings menu to see if a "Dual Microphone" or "Both" option exists. If not, you will have to choose one or the other.
What if my Sena does not have a 2.5mm audio jack?
Check whether your Sena has a charging dock or cradle with audio output pins. Many newer Sena models output audio through the dock rather than a direct jack on the unit. If your Sena has neither, you may need to use a separate audio recorder or contact Sena support to confirm which output method your specific model uses.
Do I need the official GoPro Media Mod to record Sena audio?
No. A third-party USB-C to 3.5mm microphone adapter works just as well and costs less. The Media Mod is useful if you want additional features like better audio input, a built-in display, or mounting options, but it is not required for basic Sena audio recording.