What a GoPro Hero 3 reset does and when you need one

A reset on your GoPro Hero 3 clears the camera's settings back to factory defaults and can fix freezing, connection problems, or settings you can't undo. There are two types: a soft reset (power cycle) that takes 30 seconds and solves most temporary glitches, and a full factory reset that erases all custom settings and footage if you want a completely clean slate.

Most of the time, a soft reset is all you need. Use a full factory reset only if the camera is behaving erratically after a firmware update, won't connect to the app, or you're selling or giving away the camera and want to remove your settings.

Key Takeaways

  • A soft reset (power cycle) takes 30 seconds and fixes most freezing or connection issues without erasing anything.
  • A full factory reset clears all custom settings and returns the camera to how it shipped, but does not erase video files stored on the memory card.
  • To soft reset, power off the camera, remove the battery for 10 seconds, reinsert it, and power back on.
  • To factory reset, hold the power button for 8 seconds while the camera is on, then confirm the reset on the screen.
  • After any reset, you will need to reconnect the camera to the GoPro app and reconfigure WiFi and date/time settings.

How to do a soft reset (power cycle)

A soft reset is the fastest fix for freezing, lag, or connection drops. It does not erase any footage or settings—it just restarts the camera's processor.

Step 1: Power off the camera by pressing the power button on the side until the screen goes dark. Wait 5 seconds.

Step 2: Open the battery door on the back of the camera (the small hinged panel on the bottom). Slide the battery out toward the back of the camera.

Step 3: Wait 10 seconds. This clears the camera's temporary memory.

Step 4: Reinsert the battery, making sure the gold contacts face toward the camera. Close the battery door until you hear a click.

Step 5: Press the power button to turn the camera back on. Wait for the GoPro logo to appear and the camera to fully boot (about 15 seconds).

Test the camera by recording a short clip or connecting to the app. If the problem persists, move on to a full factory reset.

How to do a full factory reset

A factory reset erases all custom settings—WiFi passwords, date and time, video resolution preferences, and any other changes you made—but it does not erase video files on the memory card. Use this when the camera is behaving unpredictably or you want to start completely fresh.

Step 1: Power on the camera by pressing the power button.

Step 2: Press the power button again and hold it down for 8 full seconds. Do not release early.

Step 3: A menu will appear on the screen asking you to confirm the reset. Use the up and down arrow buttons on the back of the camera to highlight "Yes" or "Reset".

Step 4: Press the shutter button (the large button on top) to confirm. The camera will display a progress bar and then restart automatically.

Step 5: Wait 30 seconds for the camera to fully reboot. You will see the GoPro logo and then the home screen.

The camera is now reset to factory settings. You will need to set the date and time again, and reconnect to WiFi if you plan to use the GoPro app.

Reconnecting after a reset

After either type of reset, your WiFi connection is cleared. If you want to use the GoPro app to control the camera or transfer footage, you need to reconnect.

On the camera: Press the power button, then press the WiFi button (the small button on the side) until the WiFi icon appears on the screen. The camera will broadcast its own WiFi network.

On your phone or tablet: Open your device's WiFi settings and look for a network named "GoPro Hero 3" followed by numbers. Select it and enter the default password, which is printed on a sticker inside the battery door (usually "goprohero" or similar—check your manual if unsure).

Open the GoPro app, and it should detect the camera within 10 seconds. Follow the app's prompts to complete the connection. You can now control the camera remotely and transfer videos.

Common mistakes that prevent a reset from working

The most common mistake is not holding the power button long enough during a factory reset. Eight seconds feels longer than it is—count out loud or use a watch. If you release at 5 or 6 seconds, the menu will not appear.

Another mistake is trying to reset a camera with a dead or nearly dead battery. If the battery is below 20 percent, charge the camera fully before attempting a factory reset. A reset requires enough power to complete the process, and a low battery can interrupt it mid-way.

Do not remove the battery or power off the camera during a factory reset. Once the reset menu appears and you confirm, let the camera finish the process without interruption. Stopping it early can leave the camera in an unstable state.

When to try other fixes before resetting

Before resetting, try these simpler steps. First, update the camera's firmware if you have not done so recently. Outdated firmware can cause freezing and app connection issues. Connect the camera to a computer via USB, visit the GoPro website, and follow their firmware update instructions.

Second, format the memory card inside the camera (not on a computer). Press the power button, navigate to Settings, find the Format Card option, and confirm. This clears corrupted files that might be causing crashes without erasing your videos.

Third, clear the app cache on your phone. On Android, go to Settings > Apps > GoPro, then tap Storage > Clear Cache. On iPhone, delete and reinstall the GoPro app. This fixes app connection problems without touching the camera.

If none of these work, then a soft reset is your next step, followed by a factory reset if needed.

Frequently Asked Questions

Will a factory reset erase my videos?

No. A factory reset only clears settings like WiFi passwords, date and time, and video resolution preferences. All video files on the memory card stay intact. If you want to erase videos, you must delete them manually on the camera or computer.

How long does a factory reset take?

The reset process itself takes about 30 to 45 seconds from the moment you confirm it. The camera will restart automatically. Wait another 15 seconds for it to fully boot before using it.

What is the default WiFi password after a reset?

The password does not change after a reset. It is printed on a sticker inside the battery door of your camera. If you cannot find it, check your original GoPro Hero 3 manual or contact GoPro support with your camera's serial number.

Can I reset the camera if the screen is frozen?

Yes. If the screen is frozen and unresponsive, remove the battery for 10 seconds (soft reset). If that does not work, you can still do a factory reset by holding the power button for 8 seconds even if the screen does not respond—the camera may restart before you see a menu.

Do I need to reset if the camera just feels slow?

Try a soft reset first. Slow performance often comes from a full memory card or too many files in the camera's cache. Format the memory card or delete old clips before resorting to a factory reset.