Two ways to reset your GoPro Hero 3
A reset clears your camera's settings back to factory defaults and can fix freezing, connection problems, or unusual behavior. The GoPro Hero 3 offers two reset paths: a soft reset that restarts the camera without erasing footage, and a factory reset that wipes all settings and files. Choose soft reset first if your camera is acting sluggish or won't connect to WiFi. Use factory reset only if you are selling the camera, giving it away, or soft reset did not solve the problem.
Both resets take less than five minutes. You will not lose video or photo files during a soft reset, but a factory reset removes everything except the operating system. Back up your footage before attempting a factory reset.
Key Takeaways
- A soft reset restarts your camera and fixes most connection and freezing issues without erasing any files.
- A factory reset returns all settings to defaults and removes every file on the camera, so back up your footage first.
- The soft reset method takes 30 seconds: hold the power button for 10 seconds until the camera shuts down, then press power again.
- The factory reset method requires navigating to Settings > Reset on the camera's menu and confirming the action.
How to perform a soft reset
A soft reset is the safest first step. It restarts the camera's processor without touching any files or settings. Use this when your Hero 3 freezes during recording, refuses to turn on, or will not connect to the GoPro app.
Locate the power button on the top of the camera. Press and hold it for 10 seconds until the screen goes black and the camera powers down completely. Wait 5 seconds, then press the power button once to turn the camera back on. The startup sequence takes about 10 seconds. Once the home screen appears, test your camera by opening the menu or attempting to record a short clip.
If the camera still behaves abnormally after a soft reset, proceed to a factory reset. If it works normally again, you are done.
How to perform a factory reset
A factory reset erases all files, all custom settings, and all WiFi pairing information. The camera will return to the exact state it left the factory. Do this only when you plan to sell or give away the camera, or when a soft reset failed to fix persistent problems.
Before starting, connect the camera to a computer and back up any video or photo files you want to keep. Once you begin the factory reset, those files cannot be recovered. Power on the camera and wait for the home screen to appear. Press the Mode button (on the back of the camera, below the screen) to open the main menu. Scroll down using the up and down arrow buttons until you see Settings. Press the Mode button to enter Settings.
Scroll down to find Reset and press Mode to select it. The camera will display a confirmation message asking "Reset all settings?" Scroll to Yes and press Mode. The camera will show a progress bar as it erases all data. This process takes 30 to 60 seconds. When the progress bar disappears and the home screen returns, the reset is complete. The camera is now in factory condition.
What to do if your camera won't turn on
If your Hero 3 will not power on at all, a reset may not be possible until you restore power. Connect the camera to a USB charger using the included cable and let it charge for at least 30 minutes. Some cameras shut down completely when the battery is fully drained and require a charge before they respond to button presses.
After charging, press the power button. If the camera still does not respond, try a different USB charger or a different USB cable—the original cable may be damaged. Once the camera powers on, you can perform a soft reset by holding the power button for 10 seconds.
What happens after a factory reset
After a factory reset, your Hero 3 will boot up as if it is brand new. The home screen will appear, and you will see the default settings: 1080p video resolution, 30 frames per second, no WiFi pairing, and no custom preferences. All previous files are gone.
If you are keeping the camera, you can now reconfigure it. Pair it with the GoPro app by opening the WiFi menu in Settings, selecting your camera's network name, and entering the default password (printed on the camera's battery door). If you are giving the camera away, power it off and hand it over in this clean state.
Common reasons to reset your Hero 3
The most common reason for a soft reset is WiFi connection failure. If the GoPro app cannot find your camera or keeps disconnecting, restart the camera and your phone, then try pairing again. A soft reset clears temporary WiFi data that may be corrupted.
Freezing during video recording or playback also responds well to a soft reset. If the camera locks up when you press record or try to view footage, power it down for 10 seconds and restart. This clears the camera's memory cache and usually restores normal operation.
A factory reset is necessary before selling or giving away the camera. It removes all your personal footage and WiFi passwords, leaving no trace of your use. It is also the last resort if your camera has become unstable after months of use and a soft reset does not help.
Frequently Asked Questions
Will a soft reset erase my videos and photos?
No. A soft reset only restarts the camera's processor. All your footage, photos, and settings remain on the memory card. You can safely perform a soft reset without losing anything.
How long does a factory reset take?
The factory reset process itself takes 30 to 60 seconds from the moment you confirm the action. The camera will display a progress bar. Once it disappears and the home screen returns, the reset is complete.
Can I undo a factory reset?
No. A factory reset permanently removes all files and settings. If you have not backed up your footage, it cannot be recovered. Always connect your camera to a computer and copy your files before performing a factory reset.
What is the default WiFi password after a factory reset?
The default password is printed on the battery door of your Hero 3. Look for a sticker inside the battery compartment. This password is the same for all Hero 3 cameras and does not change after a reset.
Should I soft reset my camera regularly?
You do not need to reset regularly. Soft reset only when the camera freezes, refuses to connect, or behaves unusually. If your camera works normally, there is no reason to restart it.