How to Reset the WiFi Password on a GoPro 3

The GoPro 3 stores its WiFi password in the camera's settings, and you can reset it without losing your footage or other camera data. The simplest method is to use the camera's menu system to change the password directly, which takes about two minutes. If you have forgotten the current password and cannot connect, you will need to perform a factory reset, which erases all settings but not your recorded videos.

Both methods work on the GoPro 3 and GoPro 3+ models. You will need the camera powered on and, for the direct method, access to the current WiFi password or a device already connected to the camera's network.

Key Takeaways

  • You can change the WiFi password through the camera menu without erasing any footage by going to Settings > WiFi and selecting a new password.
  • A factory reset will clear all camera settings and WiFi information if you cannot access the menu, but your recorded videos remain on the memory card.
  • After resetting the password, you will need to reconnect your phone or tablet to the camera using the new password.
  • The GoPro 3 WiFi network name (SSID) stays the same unless you change it separately in the WiFi settings menu.

Changing the WiFi Password Through the Camera Menu

Power on your GoPro 3 and press the Menu button (the left button on the back of the camera). Use the arrow buttons to scroll down to Settings and press the right arrow to enter that menu.

Scroll down to WiFi and press the right arrow. You will see options including WiFi Status, WiFi Name, and WiFi Password. Select WiFi Password and press the right arrow. The camera will display a character selection screen where you can build a new password using the arrow buttons to move between letters, numbers, and symbols, and the right arrow button to confirm each character.

Create a password between 8 and 63 characters long. Once you have entered all characters, press the Menu button to save. The camera will return to the Settings menu. Power off the camera and power it back on to confirm the change took effect.

Performing a Factory Reset if You Cannot Access the Menu

If you cannot remember the current WiFi password and have no device connected to the camera, a factory reset will clear all settings, including the WiFi password. This does not delete your recorded videos—those remain on the memory card.

With the camera powered on, press and hold the Power button for about 10 seconds until you see a menu asking you to confirm a factory reset. Select Yes using the arrow buttons and press the right arrow to confirm. The camera will restart and return to its default settings. The default WiFi network name will be GOPRO3-XXXX (where XXXX is a four-character code unique to your camera), and there will be no password set.

After the reset, you can set a new WiFi password by following the steps in the previous section. Check your camera's manual or the label on the back of the camera to find the default WiFi name if you need it.

Reconnecting Your Phone or Tablet After Changing the Password

Once you have changed or reset the WiFi password, your phone or tablet will no longer connect automatically. Open your device's WiFi settings and look for the GoPro 3's network name (the default is GOPRO3-XXXX, or whatever you named it if you changed the WiFi Name setting).

Select the network and enter the new password when prompted. Your device should connect within a few seconds. Open the GoPro App on your phone to confirm the connection is working—you should see a live preview from the camera.

What Happens to Your Videos When You Reset

A factory reset clears the camera's settings and WiFi information but does not touch the memory card. All your recorded videos, photos, and time-lapse files remain intact and will still be on the card after the reset.

If you change the WiFi password through the menu (without a factory reset), nothing is erased at all—only the password changes. Your footage, settings, and all other data stay exactly as they were.

Troubleshooting Connection Problems After a Password Change

If your phone or tablet still cannot connect after you have entered the new password, try these steps: First, power off the camera completely and power it back on. Then forget the WiFi network on your phone (go to WiFi settings, select the GoPro network, and choose "Forget"). Reconnect by selecting the network again and entering the password carefully—passwords are case-sensitive on some devices.

If the camera still does not appear in your WiFi list, check that WiFi is turned on in the camera's Settings menu. Go to Settings > WiFi and confirm that WiFi Status is set to On. If it is off, select it and press the right arrow to turn it on. Wait 10 seconds for the network to broadcast, then scan for it again on your phone.

Frequently Asked Questions

Will resetting the WiFi password delete my videos?

No. Changing the password through the menu does not delete anything. A factory reset clears settings but leaves all videos and photos on the memory card untouched. Your footage is safe either way.

What is the default WiFi password on a GoPro 3?

The GoPro 3 does not have a default password—it broadcasts an open network by default. If you see a password prompt when connecting, someone has already set one. You will need to perform a factory reset to clear it.

Can I change the WiFi network name (SSID) as well as the password?

Yes. In the Settings menu, go to WiFi and select WiFi Name. You can change it the same way you change the password, using the arrow buttons to select characters. The network name can be up to 32 characters long.

How long does a factory reset take?

A factory reset takes about 30 seconds from the moment you confirm it. The camera will restart and show the default settings screen. You can then set a new password when ready.

What if I forget the new password I just set?

You can perform another factory reset to clear it and start over. There is no way to recover a forgotten password without resetting the camera's settings.