What a factory reset does and when you need one
A factory reset wipes your GoPro back to the state it left the factory—all your settings, footage, and preferences disappear. You should reset your camera when it freezes repeatedly, won't connect to WiFi, behaves erratically, or you're selling it and want to clear your data. A reset is also the first troubleshooting step GoPro support will ask you to try before replacing hardware.
The reset process itself takes less than a minute, but you should know what you're about to lose. Any video or photos stored on the camera's memory card will remain there—a factory reset only erases settings, not footage. However, your WiFi passwords, paired devices, language preference, and any custom configurations will be gone.
Key Takeaways
- A factory reset clears all settings and preferences but leaves your video and photo files untouched on the memory card.
- The reset option lives in the camera's Settings menu under "Reset" or "System Reset," depending on your GoPro model.
- After a reset, your camera will ask you to choose language and time zone again, just like when it was new.
- If your camera is frozen and won't respond to button presses, hold the power button for 10 seconds to force a shutdown before attempting a reset.
How to reset a GoPro Hero 11, 12, or 13
Power on your camera and press the Mode button (the square button on the back) to open the main menu. Scroll down to Settings—it looks like a wrench icon—and press the shutter button to enter.
Scroll down until you see "Reset" or "System Reset." Press the shutter button to select it. You'll see a confirmation message asking if you want to reset to factory defaults. Press the shutter button again to confirm. The camera will restart and display the language selection screen, which means the reset worked.
How to reset a GoPro Hero 9, 10, or Max
Turn on the camera and press the Mode button to reach the main menu. Navigate to Settings (the wrench icon) and press the shutter button.
Scroll down to find "Reset" and press the shutter button. A confirmation prompt will appear. Press the shutter button once more to complete the reset. Your camera will power off and restart, then show the language selection screen.
How to reset older GoPro models (Hero 8 and earlier)
The menu layout on Hero 8 and earlier models is slightly different. Power on your camera and press the Mode button to open the menu. Look for Settings (wrench icon) and press the shutter button to enter.
Scroll to "Reset" and press the shutter button. Confirm the reset when prompted. The camera will restart and show the setup screen.
What to do if your camera is frozen or unresponsive
If your GoPro won't respond to button presses, you can force it to shut down. Hold the power button (usually on the side or top of the camera) for 10 to 15 seconds until the screen goes black. Wait 30 seconds, then power it back on normally.
Once the camera is responsive again, follow the reset steps for your model. If the camera freezes again when ready after reset, or if it won't power on at all, the issue may be hardware-related and you should contact GoPro support or check their warranty information.
After the reset: what to set up first
When your camera restarts after a factory reset, it will ask you to choose a language and set the time and date. Take a moment to set these correctly—the timestamp on your footage depends on accurate time settings.
Next, you'll want to reconnect to WiFi if you use the GoPro app. Go back to Settings, find "Connections" or "WiFi," and select your network. You'll also need to re-enter any passwords you use for cloud backup or app pairing. Your video and photo files will still be on the memory card and visible in the camera's playback menu.
Backing up your footage before a reset
Since a reset doesn't erase your memory card, your footage is safe—but it's still smart to back up important videos before you reset. Connect your camera to a computer with a USB cable, or remove the memory card and use a card reader. Copy your footage to a folder on your computer or external drive.
Once you've confirmed the backup is complete, you can reset the camera without worry. If something goes wrong during the reset process, your footage will be waiting on the memory card when the camera restarts.
Frequently Asked Questions
Will a factory reset delete my videos and photos?
No. A factory reset only clears settings and preferences. Your video and photo files stay on the memory card. You'll see them in the camera's playback menu after the reset is complete.
How long does a factory reset take?
The reset itself takes less than a minute. The camera will power off, restart, and show the language selection screen. Setting up the language and time zone takes another minute or two.
What if my camera is stuck on the language selection screen after a reset?
This is normal—it's the first-time setup screen. Select your language and press the shutter button, then set the time and date. If the camera freezes during this process, hold the power button for 10 seconds to force a shutdown and try again.
Do I need to remove the memory card before resetting?
No. You can leave the memory card in the camera during a reset. The reset won't touch the card or the files on it.
My camera still won't work after a factory reset. What should I do?
If the camera continues to freeze, won't power on, or behaves the same way after a reset, the problem is likely hardware-related. Check GoPro's support website for your camera model, or contact their support team directly to discuss warranty options.