A factory reset clears all your settings and footage from the camera
A factory reset on your GoPro Hero 3 erases all custom settings, Wi-Fi pairings, and any files stored on the camera's memory card, returning it to the state it left the factory. This is useful when the camera is freezing, not connecting to Wi-Fi, or behaving unpredictably. The reset takes about two minutes and requires only the camera itself and a charged battery.
Before you reset, understand that this action is permanent—any footage or photos on the camera will be deleted. If you have content you want to keep, transfer it to a computer first. The camera will not delete files on an external memory card if you remove it before resetting, so that is one way to preserve footage while clearing the camera's internal state.
Key Takeaways
- A factory reset erases all settings, Wi-Fi pairings, and files stored on the camera, so back up any footage before you start.
- The reset menu is found in the camera's settings, accessed by pressing the power button and then the mode button to navigate.
- The entire reset process takes about two minutes and requires only a charged battery.
- After reset, the camera will restart and prompt you to set the date and time before you can record again.
- If the camera is frozen or unresponsive, a hard reset (holding power for 10 seconds) may work before you try a factory reset.
How to access the settings menu on your Hero 3
Power on the camera by pressing the power button on the side. The LCD screen on the back will light up and show the main recording screen. You will see icons for video, photo, and burst modes at the top.
Press the mode button (the small button below the power button) repeatedly to cycle through the menu screens until you see the settings icon—it looks like a wrench or gear symbol. Once you see it, press the power button to enter the settings menu. The camera will display a list of options including video resolution, frame rate, and other adjustments.
Navigate to the reset option in settings
Use the mode button to scroll down through the settings list. You are looking for an option labeled "Reset" or "Factory Reset"—it is usually near the bottom of the menu. Press the power button to select it when you find it.
The camera will ask you to confirm the reset. A message will appear asking "Reset to factory defaults?" with two options: "Yes" and "No". Press the mode button to highlight "Yes" and then press the power button to confirm. Do not press any buttons during the reset process itself—the camera will show a progress indicator and will restart automatically when finished.
What happens when ready after the reset completes
The camera will power off and then turn back on automatically. When it restarts, it will display a setup screen asking you to set the date and time. Use the mode button to navigate between the date and time fields and the power button to confirm your entries. This step is necessary because the camera's internal clock resets along with everything else.
Once you have set the date and time, the camera will return to the main recording screen. All previous settings—video resolution, frame rate, Wi-Fi network connections, and any custom preferences—will be gone. The camera is now in the same state as when it was new.
Try a hard reset if the camera is frozen
If your Hero 3 is not responding to button presses or is stuck on a frozen screen, a factory reset through the menu may not be possible. In this case, try a hard reset first: hold down the power button for 10 to 15 seconds without releasing it. The camera will force shut down.
Wait 30 seconds, then press the power button again to turn it back on. This often clears temporary glitches that cause freezing or unresponsiveness. If the camera still behaves erratically after a hard reset, then proceed with the factory reset through the settings menu as described above.
Restore your camera after the reset is complete
After the factory reset, your Hero 3 is ready to use, but you will need to set up any features you regularly use. If you want to use Wi-Fi to control the camera or transfer footage, you will need to pair it with the GoPro app again—the old pairing is erased during the reset.
Check that your preferred video resolution and frame rate are set correctly in the settings menu, as these also return to factory defaults. If you had a memory card removed during the reset, reinsert it now. Any files on the card will still be there, and the camera will recognize it when ready.
When to contact GoPro support instead
If the camera still does not work after a hard reset and a factory reset, the problem may be hardware-related rather than a software glitch. Contact GoPro's support team through their website—they can help you determine whether the camera needs repair or replacement. Have your camera's serial number ready; you can find it on the back of the device or in the original packaging.
If the camera will not power on at all, even after charging for several hours, the battery may be defective. Try charging it with a different USB cable or power adapter if you have one available. If it still will not power on, that is also a sign to reach out to GoPro support.
Frequently Asked Questions
Will a factory reset delete my footage?
Yes, a factory reset erases all files stored on the camera's internal memory. If you have footage you want to keep, transfer it to a computer before you reset. Files on a removable memory card will not be deleted if you remove the card before resetting.
How long does a factory reset take?
The reset process itself takes about one to two minutes. After the camera restarts, you will need another minute or two to set the date and time. The entire process from start to finish is usually complete in five minutes.
Do I need to charge the battery before resetting?
Yes, the battery should be at least half charged before you attempt a factory reset. If the battery dies during the reset, the camera may not restart properly. Charge it fully if possible.
What if the reset option does not appear in my settings menu?
Make sure you are scrolling all the way to the bottom of the settings list—the reset option is usually the last item. If you still cannot find it, try a hard reset (hold power for 10 seconds) to clear any temporary glitches, then look again.
Can I undo a factory reset?
No, a factory reset cannot be undone. Once you confirm it, all settings and files are permanently erased. This is why it is important to back up any footage before you reset.