Reset the WiFi Password Through the Camera Menu
The fastest way to reset your GoPro Hero 3 WiFi password is through the camera's own menu system. Power on the camera, press the Menu button (the left side button), and navigate to Wireless Settings. From there, select Reset or Reset WiFi depending on your firmware version. The camera will return the WiFi name and password to the factory defaults printed on a sticker on the camera's battery door.
This method takes about two minutes and requires no computer or app. After the reset completes, your WiFi network name will be something like "GP123456" (where the numbers match your camera's serial number), and the default password is typically "goprohero" in all lowercase. Write down these credentials before you disconnect, because you'll need them to reconnect your phone or tablet to the camera.
Key Takeaways
- The camera menu reset is the simplest method and restores the factory WiFi name and password without needing a computer.
- Default WiFi credentials are printed on a sticker inside the battery compartment if you forget them after resetting.
- If the menu method doesn't work, a full factory reset through the camera settings will also clear the WiFi password.
- After resetting, you'll need to re-enter the WiFi credentials in the GoPro App or on any device you want to connect.
Use a Full Factory Reset if the Menu Reset Fails
If navigating to Wireless Settings doesn't show a reset option, or if the reset doesn't take effect, perform a full factory reset instead. Go to Menu, then Setup, then scroll to Reset and select Reset All. The camera will ask you to confirm—select Yes. This erases all settings, videos, and photos on the camera's memory card, so only use this method if you've already backed up your footage.
A full factory reset takes about 30 seconds and will restore the WiFi password to factory defaults. After the reset completes, power the camera off and back on. The WiFi will be ready to pair with your phone or tablet using the default credentials on the battery door sticker.
Reconnect Your Phone or Tablet After Resetting
Once the WiFi password is reset, you'll need to reconnect your device. Open the GoPro App on your phone or tablet and tap Connect a Camera. The app will search for nearby GoPro networks. Select your camera's network name (the "GP" number on the sticker) and enter the default password when prompted.
If the app doesn't find the camera, make sure the camera is powered on and in range (within about 30 feet). Also check that your phone's WiFi is turned on and not connected to another network. Once the app connects, you can change the WiFi password to something custom through the app's settings, which is more find than leaving the factory default active.
Change the WiFi Password to Something Custom
After you've reset and reconnected, you can create a new WiFi password that's easier to remember. In the GoPro App, go to Preferences or Settings, then Camera Settings, then Wireless. Look for an option labeled WiFi Password or Change Password. Enter your new password (usually 8 to 32 characters) and confirm it.
Write down your new password and store it somewhere safe. The next time you connect a device to the camera, you'll use this custom password instead of the factory default. If you forget the custom password later, you can always reset the WiFi again to return to the factory credentials.
Troubleshooting Connection Problems After Reset
If your phone or tablet still won't connect after resetting the WiFi password, first check that you're entering the password correctly—it's case-sensitive and spaces matter. Power off the camera completely, wait 10 seconds, and power it back on. Then try connecting again from your device's WiFi settings (not just the app).
If the camera's WiFi network doesn't appear in your device's WiFi list at all, the camera may not be in pairing mode. Some Hero 3 models require you to press and hold the WiFi button on the camera for three seconds to enable pairing mode. Check your camera's manual or the sticker on the battery door for the exact WiFi button location. If you still can't see the network after trying these steps, a full factory reset is your next option.
What the Default WiFi Credentials Look Like
The factory WiFi name and password are always printed on a sticker attached to your camera's battery door. The WiFi name starts with "GP" followed by six numbers (for example, "GP123456"). The default password is "goprohero" in lowercase letters with no spaces. These credentials are the same for all Hero 3 cameras, so if you've reset multiple cameras, each one will have a different WiFi name but the same password.
If the sticker on your battery door is worn or missing, you can find the WiFi name by looking at the last six digits of your camera's serial number. The serial number is printed inside the battery compartment. The password will always be "goprohero" unless you've already changed it to something custom.
Frequently Asked Questions
Will resetting the WiFi password erase my videos and photos?
A WiFi-only reset through the Wireless Settings menu will not erase any footage. A full factory reset will erase everything on the memory card, so back up your videos and photos before choosing that option. If you're only resetting the WiFi password, your media is safe.
What if I can't find the Wireless Settings menu on my camera?
The menu structure varies slightly between Hero 3 firmware versions. Try pressing Menu, then look for "Settings" or "Setup" instead of "Wireless Settings." If you still can't locate it, consult your camera's manual or the quick-start guide that came in the box. You can also perform a full factory reset as an alternative.
Can I use any password I want when I reset the WiFi?
Yes, once you've reset to the factory password, you can change it to any custom password through the GoPro App. Most cameras accept passwords between 8 and 32 characters. Avoid special characters unless your camera's manual specifically says they're supported, as some older firmware versions don't handle them well.
How long does it take for the WiFi reset to take effect?
The WiFi reset completes in about 10 to 20 seconds. After the camera confirms the reset is done, power it off and back on before trying to connect a device. This ensures the new WiFi settings are fully loaded.
Do I need the GoPro App to reset the WiFi password?
No. You can reset the WiFi password using only the camera's menu buttons—no app or computer required. The app is only needed if you want to change the password to something custom after the reset, or to control the camera remotely.