Reset your GoPro Hero Session in three steps
A factory reset clears all your settings, footage, and preferences and returns the camera to the state it left the factory. You do this through the camera's menu, not through a computer. The process takes about two minutes and does not require a computer, USB cable, or any external tool.
Power on the camera. Press the Mode button (the small button on the back) to enter the menu. Use the shutter button to navigate down to Settings, then press Mode again to enter Settings. Scroll down to Reset and press the shutter button to confirm. The camera will display a confirmation message asking if you want to reset to factory defaults. Press the shutter button once more to confirm, and the reset will begin. The camera will power off automatically when the reset is complete.
Key Takeaways
- A factory reset erases all footage, settings, and preferences and returns the camera to its original state.
- You access the reset function through the camera's menu using the Mode and shutter buttons — no computer needed.
- The reset takes about two minutes and the camera powers itself off when finished.
- After reset, you will need to reformat your memory card and reconfigure basic settings like date and time.
- A reset does not fix hardware problems like a cracked lens or unresponsive buttons — those require repair or replacement.
When to reset your Hero Session
Reset the camera when it freezes repeatedly, fails to record, or behaves erratically even after you have powered it off and back on. A reset also clears out old settings if you inherited a used camera or are preparing to sell or give away your unit.
Do not reset if you have footage on the camera that you have not backed up to a computer or cloud storage. The reset will erase everything on the memory card. If you want to keep your videos, copy them to your computer first, then format the card inside the camera, then perform the reset.
What happens to your memory card during reset
A factory reset does not automatically erase your memory card. Your footage and photos remain on the card after the reset is complete. However, the camera's file system may become corrupted if the reset is interrupted by a power loss, so it is wise to format the card inside the camera after the reset finishes.
To format the card, enter the menu, navigate to Settings, find Format Card, and confirm. Formatting erases everything on the card and prepares it for fresh recording. This step takes about one minute. After formatting, the camera is ready to record.
Troubleshooting a reset that does not work
If the reset menu does not appear or the camera does not respond to button presses, the battery may be too low. Charge the camera fully using the USB cable and power adapter, then try again. A battery level below 20 percent can prevent the menu from responding.
If the camera still does not respond after a full charge, try a hard reset by holding down the Mode button for ten seconds while the camera is powered on. Release the button and wait for the camera to power off. This forces a restart and sometimes clears temporary glitches that prevent the normal reset menu from opening. After the hard reset, power the camera back on and attempt the factory reset through the menu again.
What a reset does and does not fix
A reset fixes software problems: frozen menus, recording failures, settings that will not save, and erratic behavior. It does not fix hardware damage. If your lens is cracked, a button is stuck, the screen is broken, or the camera will not power on at all, a reset will not help.
If the camera powers on but the screen is black or the image is distorted, a reset may help if the problem is a corrupted video file or a software glitch. If the problem persists after reset and format, the issue is likely hardware and the camera will need repair or replacement.
Reconfiguring the camera after reset
After the reset and format are complete, the camera will prompt you to set the date and time. Use the Mode button to navigate and the shutter button to confirm your selections. Set the correct date and time so your footage is stamped accurately.
Next, check the video resolution and frame rate settings. The Hero Session defaults to 1080p at 60 frames per second, which works well for most users. If you want to record in 4K or at a different frame rate, enter Settings, find Video, and adjust. Lower frame rates and resolutions use less battery and storage space. Higher settings produce sharper video but drain the battery faster and fill the memory card quicker.
Frequently Asked Questions
Will a factory reset remove the firmware from my Hero Session?
No. A factory reset clears your settings and files but leaves the camera's firmware (the internal software that runs the camera) untouched. The firmware is separate from user data and cannot be erased by a reset. If you need to update the firmware, you do that through the GoPro app on your phone or computer, not through a reset.
Can I reset the camera if the battery is dead?
No. The camera must be powered on to access the reset menu. Charge the battery fully before attempting a reset. If the battery will not hold a charge, the camera has a hardware problem and will need repair.
How long does a factory reset take?
The reset itself takes about one to two minutes. Formatting the memory card afterward takes another minute or so. The entire process from start to finish is usually complete in three to four minutes.
Do I need to remove the memory card before resetting?
No. Leave the memory card in the camera during the reset. The reset does not erase the card, and removing it is not necessary. After the reset, you can format the card inside the camera if you want to clear old files.
What if I reset the camera by accident?
You cannot undo a reset once it is complete. However, your footage remains on the memory card even after a reset — the reset only clears the camera's settings and preferences, not the card's files. You can recover your videos by connecting the card to a computer and copying the files before you format the card.