What a factory reset does and when you need one

A factory reset wipes all your settings, footage, and files from the camera and returns it to the state it left the factory. The Hero3 will forget your WiFi network, any custom video modes you set up, and all footage stored on the internal memory. Use a factory reset when the camera freezes repeatedly, won't connect to WiFi, behaves erratically, or you're selling or giving away the device.

Before you reset, understand that this action cannot be undone. Any video or photo on the camera's internal storage will be deleted. If you have footage you want to keep, connect the Hero3 to a computer and copy the files to your hard drive first. The reset itself takes about 30 seconds and requires only the camera and a charged battery.

Key Takeaways

  • A factory reset deletes all footage, settings, and WiFi information from your Hero3 and cannot be reversed.
  • Copy any video or photos to a computer before resetting if you want to keep them.
  • The reset menu is accessed through Settings, then scroll to Reset, and confirm the action.
  • After reset, the camera will restart and you will need to set the date, time, and WiFi connection again.
  • If the camera is frozen and the menu won't respond, remove the battery for 30 seconds, reinsert it, and try the reset again.

How to access the reset menu

Turn on the Hero3 by pressing the power button on the back of the camera. The LCD screen on the back will light up and show the main menu with options like Video, Photo, and Playback. Press the Menu button (the left button below the screen) to enter the settings menu.

Use the up and down arrow buttons to scroll through the settings options. Look for an option labeled Reset or Factory Reset — the exact wording varies slightly by firmware version, but it will be near the bottom of the settings list. Highlight it and press the right arrow or select button to open the reset submenu.

Confirming the reset and what happens next

Once you select Reset, the camera will ask you to confirm. A message will appear on the screen asking "Are you sure?" or similar language. Press the right arrow or select button to confirm. The camera will display a progress bar or loading indicator while the reset runs — this usually takes 20 to 30 seconds.

When the reset completes, the Hero3 will restart automatically. The screen will show the startup sequence, and you will see a prompt to set the date and time. Use the arrow buttons to adjust the date and time, then press select to confirm. The camera is now reset to factory settings and ready to use.

Reconnecting WiFi and reconfiguring after reset

After the reset, the Hero3 will not remember any WiFi networks it previously connected to. If you use the GoPro App on a smartphone to control the camera or transfer footage, you will need to pair them again. Go back into Settings, find WiFi or Wireless, and turn WiFi on. The camera will broadcast its own WiFi network name (usually something like "HERO3-XXXX").

Open the GoPro App on your phone, select your camera from the list of available networks, and enter the WiFi password printed on a sticker inside the camera's battery compartment or on the back of the manual. Once connected, the app will recognize the camera and you can control it remotely and read footage directly to your phone.

If the camera is frozen and won't respond to the menu

Sometimes the Hero3 becomes unresponsive and the menu buttons do not work. In this case, a hard reset may work better than a factory reset. Locate the battery door on the back of the camera (usually held by a small latch or screw) and open it. Remove the battery completely and wait 30 seconds — this clears the camera's temporary memory.

Reinsert the battery, close the battery door, and power on the camera. Try accessing the Settings menu again and performing the factory reset as described above. If the camera still does not respond, the battery itself may be failing or the camera may have a hardware fault — in that case, contact GoPro support or visit an authorized retailer for repair options.

What to do if you forget your WiFi password after reset

The WiFi password for the Hero3 is printed on a sticker inside the battery compartment. Open the battery door, look inside, and you should see a label with the camera's WiFi network name and password. If the sticker is missing or illegible, you can reset the WiFi password through the camera's settings menu. Go to Settings, find WiFi or Wireless, and look for an option like "Change Password" or "Reset WiFi."

Follow the on-screen prompts to create a new password. Write it down or take a photo of the new password so you have it handy when pairing with the GoPro App. The password must be at least 8 characters long on most Hero3 models.

Frequently Asked Questions

Will a factory reset fix a camera that won't turn on?

No. A factory reset requires the camera to be powered on and responsive to button presses. If the Hero3 won't turn on at all, the issue is likely a dead or faulty battery, a charging problem, or a hardware fault. Try charging the battery for at least two hours, then attempt to power on. If it still does not respond, the battery or camera may need replacement.

Can I reset the camera without losing my footage?

No. A factory reset deletes everything on the camera's internal storage, including all video and photos. You must copy your footage to a computer before resetting if you want to keep it. Connect the Hero3 to a computer via USB cable, open the camera's storage folder, and drag your video and photo files to a folder on your hard drive.

How long does a factory reset take?

The reset process itself takes 20 to 30 seconds. After the reset completes, the camera restarts and prompts you to set the date and time, which adds another minute or two. The entire process from pressing confirm to having a fully reset camera ready to use is usually under five minutes.

Do I need to charge the battery before resetting?

Yes. The battery should have at least 50 percent charge remaining before you start a factory reset. If the battery dies during the reset, the camera may not restart properly or could become corrupted. Charge the Hero3 fully before beginning, or use a fully charged spare battery if you have one.

What if the reset menu option is grayed out or missing?

This can happen if the camera's firmware is corrupted or outdated. Try turning the camera off and on again, then navigate back to Settings. If the Reset option is still missing or grayed out, the firmware may need to be updated or reinstalled. Visit the GoPro website, read the latest firmware for the Hero3, and follow their instructions for updating the camera via USB connection to a computer.