Reset the WiFi Password Through the Camera Menu
The fastest way to reset your GoPro Hero 3 WiFi password is through the camera's own menu system. Power on the camera, press the Menu button on the back, navigate to Wireless, then select Reset. The camera will clear the current WiFi settings and return to factory defaults. This takes about 30 seconds and requires no computer or additional tools.
After you reset, the camera's WiFi name (SSID) will return to the default format: GOPRO-XXXX, where XXXX is a four-digit code printed on a sticker inside the camera's battery compartment. The default password is also printed on that same sticker. Write down both before you reset, so you have them ready when you reconnect your phone or tablet.
If you cannot find the sticker or it has worn away, you can still proceed—the default password is always the last eight characters of the WiFi name. For example, if your WiFi name is GOPRO-1234, the password is 1234 repeated twice (12341234).
Key Takeaways
- The WiFi password reset happens in the camera's Menu > Wireless > Reset, and takes about 30 seconds.
- After reset, your camera's WiFi name and password return to the factory default printed on a sticker inside the battery compartment.
- If you have lost the sticker, the default password is always the last four digits of the WiFi name, repeated twice.
- You do not need a computer, app, or internet connection to reset the WiFi password—the camera does it alone.
- Once reset, you will need to reconnect your phone or tablet using the new default WiFi name and password.
Locate the Default WiFi Name and Password
Before you reset, find the sticker on your GoPro Hero 3. Open the battery compartment door on the side of the camera (the side opposite the screen). Inside, you will see a small white or silver sticker with printed text. The sticker shows two pieces of information: the WiFi name (SSID) at the top and the WiFi password below it.
Write both down on a piece of paper or take a photo with your phone. The WiFi name usually starts with "GOPRO-" followed by four numbers. The password is typically an eight-character code. If the sticker is faded or missing, you can still use the backup method: the password is always the last four digits of the WiFi name, typed twice in a row.
Step-by-Step Reset Process
Turn on your GoPro Hero 3 by pressing the power button on the top of the camera. Wait for the screen to light up and show the main menu. Press the Menu button on the back of the camera (the button with three horizontal lines). The menu screen will appear.
Use the arrow buttons on the back of the camera to scroll down until you see Wireless. Press the right arrow or the button below the screen to enter the Wireless menu. Scroll down again until you see Reset or Reset Wireless. Press the button below the screen to select it. The camera will ask you to confirm—press the button again to confirm the reset.
The camera will process for a few seconds, then return to the main menu. The reset is complete. Power off the camera, then power it back on. The WiFi settings have been erased and returned to factory defaults.
Reconnect Your Phone or Tablet After Reset
Once the reset is finished, you will need to reconnect your mobile device to the camera's WiFi. On your phone or tablet, open the WiFi settings and look for the camera's WiFi name in the list of available networks. It will appear as GOPRO-XXXX (the four-digit code from the sticker). Tap it to connect.
When prompted for a password, enter the eight-character code from the sticker. If you do not have the sticker, use the backup password: the last four digits of the WiFi name, typed twice. For example, if the WiFi name is GOPRO-5678, the password is 56785678. Once you enter the password correctly, your device will connect to the camera.
After you reconnect, you can open the GoPro app on your phone to control the camera remotely. If you want to change the WiFi password to something you choose, you can do that through the app's settings—look for Wireless or WiFi Settings in the app menu.
Common Mistakes to Avoid
Do not hold down the Menu button—press it once and release. Holding it down may trigger a different function or lock the camera. If the menu does not appear, make sure the camera is fully powered on and the battery has charge. A low battery can prevent the menu from responding.
Do not confuse the WiFi password with the camera's PIN code. The PIN is a separate four-digit number used to lock the camera itself; the WiFi password is what you use to connect your phone. They are different and printed in different places on the sticker.
Do not assume the reset will erase your video or photo files. The WiFi reset only clears wireless settings. All your recorded footage remains on the camera's memory card. If you want to erase files, you must do that separately through the camera's Delete menu.
What to Do If the Reset Does Not Work
If you follow the steps and the WiFi name does not change back to GOPRO-XXXX, the reset may not have completed. Power off the camera completely, wait 10 seconds, then power it back on. Check the WiFi settings again. Sometimes the camera needs a full restart to explore the reset.
If the camera still shows a custom WiFi name (one you set yourself), try the reset process again. Make sure you are selecting Reset and not just Wireless. The menu structure can vary slightly depending on your camera's firmware version, so look carefully for the word "Reset" in the Wireless submenu.
If the camera is unresponsive or the menu buttons do not work, the battery may be too low. Plug the camera into a USB charger using the included cable and let it charge for at least 30 minutes. Then try the reset again.
Changing Your WiFi Password to Something Custom
After you reset and reconnect your phone, you can set a new WiFi password of your choice. Open the GoPro app on your phone and go to Settings > Wireless > WiFi Settings. Look for an option to change the WiFi name or password. The app will let you type a custom password (usually up to 63 characters).
Write down your new password and store it somewhere safe. If you forget it later, you will need to reset the camera again to return to the factory default. The reset process is the same whether you are resetting from a custom password or from the factory default.
Frequently Asked Questions
Will resetting the WiFi password erase my videos and photos?
No. The WiFi reset only clears wireless settings. All video and photo files stay on the camera's memory card. If you want to erase files, you must delete them separately through the camera's Delete menu.
What is the default WiFi password if I lost the sticker?
The default password is always the last four digits of the WiFi name, repeated twice. If your WiFi name is GOPRO-9876, the password is 98769876. This formula works for all GoPro Hero 3 cameras.
Can I reset the WiFi password without turning on the camera?
No. The camera must be powered on and the battery must have enough charge to access the menu. If the battery is very low, charge the camera first, then perform the reset.
How long does the WiFi reset take?
The reset process takes about 30 seconds from the moment you select Reset in the menu until the camera returns to the main menu. After that, you can power off and power back on to confirm the reset is complete.
Do I need a computer to reset the WiFi password?
No. The entire reset happens on the camera itself using only the buttons on the back. You do not need a computer, USB cable, or any software to reset the WiFi password.