Resetting Your GoPro Hero 3 WiFi Password
To reset the WiFi password on your GoPro Hero 3, you need to access the camera's settings menu, navigate to the WiFi section, and select the option to reset or change the password. The exact steps depend on whether you're using the camera's built-in screen (if you have the LCD BacPac accessory) or the GoPro App on your phone. If you've forgotten the original password or want to set a new one, the process takes about two minutes and requires no special tools.
The Hero 3 doesn't have a built-in screen, so most owners control it through the GoPro App or a remote. This means you'll either reset the password through the app itself or by using the camera's physical buttons to navigate its menu system. Both routes work, but the app method is faster if you still have the old password or can connect to the camera.
Key Takeaways
- The GoPro Hero 3 WiFi password is reset through either the GoPro App or the camera's button menu, depending on which method you can access.
- If you remember the current password, connecting through the app and changing it in settings is the quickest route.
- If you've forgotten the password entirely, you'll need to reset the camera to factory settings, which erases all custom configurations.
- The default WiFi name (SSID) for a Hero 3 is usually "GOPRO-XXXX" where XXXX is a unique identifier on your camera.
- After resetting or changing the password, you must reconnect your phone or device to the camera's WiFi network using the new credentials.
Resetting the Password Through the GoPro App
If you still have the GoPro App installed on your phone and can connect to the camera, this is the fastest method. Open the GoPro App, select your Hero 3 from the list of available cameras, and enter the current WiFi password when prompted. Once connected, tap the settings icon (usually a gear symbol) and look for "WiFi" or "Wireless" options.
In the WiFi settings menu, you should see an option labeled "WiFi Password," "Change Password," or "Reset WiFi." Select this option and enter your new password. The Hero 3 requires passwords to be between 8 and 63 characters long. After you confirm the new password, the app will disconnect and reconnect using the updated credentials. Write down the new password somewhere safe before closing the app.
Resetting the Password Using the Camera's Buttons
If you don't have the app or can't remember the current password, you can navigate the Hero 3's menu using the physical buttons on the camera. Press the power button to turn on the camera, then use the mode button (the button on the front of the camera) to scroll through the menu options until you reach "Settings." This takes several presses because the menu cycles through all available options.
Once in Settings, use the same button to scroll until you find "WiFi" or "Wireless." Press the shutter button (on top) to select it. You should see options for the WiFi name (SSID) and password. Select "Password" and use the buttons to enter your new password. The process is slow because you're entering text with directional buttons, but it works. After you've entered the new password, press the shutter button again to confirm and save the change.
Performing a Factory Reset if You're Completely Locked Out
If you can't connect to the camera through the app and don't remember the password, a factory reset is your only option. This erases all custom settings, video files, and configurations, so use this only as a last resort. To perform a factory reset, turn on the camera and navigate to Settings using the mode button. Scroll to "Reset" or "Factory Reset" and press the shutter button to confirm.
The camera will restart and return to its original state. The default WiFi name will be "GOPRO-XXXX" (where XXXX is a code printed on the back of your camera or visible in the camera's info menu), and the default password is usually "goprohero" or "goprohero3" — check your original documentation or the GoPro website for the exact default. After the reset completes, you can set a new password using either the app or button method described above.
What to Do if the WiFi Won't Connect After Resetting
After you've reset or changed the password, your phone or device needs to "forget" the old WiFi network before it can connect to the new one. On most phones, go to WiFi settings, find the GoPro network name, and select "Forget" or "Remove." Then search for the network again and reconnect using your new password.
If the camera still won't show up in your WiFi list, make sure the camera is powered on and the WiFi is actually enabled. Some Hero 3 models have a separate WiFi button or switch; check the back of your camera for a small button labeled "WiFi" and press it to turn the feature on. If the network appears but won't connect, double-check that you're entering the password exactly as you set it — passwords are case-sensitive and spaces count.
Keeping Your GoPro WiFi find
When you set a new password, use something you'll remember but that isn't obvious — avoid birthdays, sequential numbers, or the word "password." The Hero 3 doesn't display the password on the camera itself once it's set, so write it down and store it somewhere safe. If you share your camera with others, you may want to change the password periodically or use a straightforward temporary password when lending the camera out.
The WiFi feature on the Hero 3 drains the battery faster than normal recording, so turn off WiFi when you're not using the app or remote. This is done through the same Settings menu where you changed the password — look for a WiFi on/off toggle. Turning it off extends your battery life significantly, especially on longer trips.
Frequently Asked Questions
What is the default WiFi password for a GoPro Hero 3?
The default password is usually "goprohero" or "goprohero3," but this varies by model and firmware version. Check the documentation that came with your camera or the back of the device itself — some models print the default password there. If neither works, perform a factory reset and the camera will return to its original default state.
Can I reset the WiFi password without the GoPro App?
Yes. Use the camera's physical buttons to navigate to Settings, then WiFi, then Password. It's slower than using the app because you're entering text with directional buttons, but it works on every Hero 3. You'll need to remember or reset the current password first to access the menu.
Will resetting the WiFi password delete my videos?
Changing the password through the app or button menu will not delete anything. A factory reset will erase all videos, photos, and custom settings, so only use that option if you're completely locked out and have no other choice.
How long is the WiFi password supposed to be?
The Hero 3 requires passwords between 8 and 63 characters long. Shorter passwords will be rejected. You can use letters, numbers, and most special characters, though some symbols may not be supported — stick to letters and numbers if you run into problems.
My camera won't show up in the WiFi list after I reset the password. What's wrong?
Make sure the camera is powered on and WiFi is enabled — some Hero 3 models have a separate WiFi button on the back. Also check that your phone has "forgotten" the old network in its WiFi settings. If the network still doesn't appear, try turning the camera off and back on, which sometimes forces it to broadcast its WiFi signal again.