The fastest way to restart your GoPro
A restart clears temporary glitches that freeze the screen, drop the connection to your phone, or stop recording mid-session. The method depends on which GoPro model you own, but the basic principle is the same: hold the power button until the camera shuts down completely, then press it again to turn it back on.
For most current GoPro models (Hero 11, Hero 10, Hero 9), hold the power button on the side of the camera for about three seconds until you see the power-down animation and the screen goes black. Wait five seconds, then press the power button once to turn it back on. The camera will boot up in about 10 to 15 seconds.
If your camera is frozen and won't respond to the power button, you may need a force restart. This is different from a normal restart and forces the system to shut down when ready without the usual shutdown sequence.
Key Takeaways
- A normal restart takes about 20 seconds total and fixes most connection and freezing problems without erasing your footage.
- Hold the power button for three seconds to shut down, wait five seconds, then press it once to turn the camera back on.
- If the camera is completely frozen, use a force restart by holding the power button for ten seconds without releasing.
- Older GoPro models like the Hero 8 and earlier use the same restart method but may take slightly longer to boot.
- A restart is safe to do at any time and will not delete your videos or photos.
Normal restart for Hero 11, Hero 10, and Hero 9
Press and hold the power button on the right side of the camera. You will see the GoPro logo appear on the screen, followed by a shutdown animation. Keep holding until the screen goes completely black—this usually takes about three seconds.
Release the button and wait five seconds. This pause gives the camera's system time to fully power down. Then press the power button once, briefly. The camera will turn on and display the GoPro startup animation. The entire boot-up process takes 10 to 15 seconds, and you will see the main menu once it is ready.
If you are restarting because the camera was frozen, you may notice the screen was unresponsive before the shutdown. That is normal—the force to shut down overrides any frozen state.
Force restart when the camera is completely frozen
If pressing the power button does not produce any response—no animation, no screen change, nothing—the camera is likely frozen at the system level. A force restart bypasses the normal shutdown sequence and forces the hardware to stop when ready.
Hold the power button down for ten full seconds without releasing. Do not let go after three seconds. Count to ten slowly, or watch the clock. After about seven seconds, you may see the screen flicker or go black. Keep holding. At ten seconds, release the button and wait five seconds.
Then press the power button once to turn the camera back on. A force restart is more abrupt than a normal restart, but it will not damage the camera or erase your footage. Use it only when the camera does not respond to a normal restart.
Restarting older GoPro models (Hero 8 and earlier)
Older models use the same restart method, but the power button location and boot time may differ slightly. On the Hero 8, Hero 7, and Hero 6, the power button is on the top of the camera rather than the side. Hold it for three seconds until you see the shutdown animation, wait five seconds, then press it once to turn the camera back on.
These older models may take 15 to 20 seconds to boot up instead of 10 to 15. The process is otherwise identical. If you are unsure which model you own, check the back of the camera or the original box—the model name is printed there.
What to do after the restart
Once your GoPro has restarted and the main menu appears, check that all your settings are still in place. A restart does not change any settings or delete footage, so your resolution, frame rate, and other preferences will be exactly as you left them.
If you restarted because the camera would not connect to the GoPro app on your phone, try pairing again now. Open the GoPro app, go to the Connections menu, and select your camera from the list. The connection usually works when ready after a restart.
If the same problem happens again within a few hours, the issue may be deeper than a temporary glitch. In that case, check whether a firmware update is available by connecting the camera to a computer and visiting the GoPro support website.
Common reasons to restart your GoPro
The camera freezes during recording or playback, and the screen does not respond to button presses. A restart clears the frozen state and lets you record again.
The GoPro app on your phone cannot find or connect to the camera, even though both are powered on and the camera's Wi-Fi is enabled. A restart resets the wireless connection and usually fixes this problem.
The camera turns on but the screen stays black or shows a distorted image. A restart refreshes the display driver and often resolves this without any other action.
Recording stops unexpectedly, or the camera shuts itself off during use. A restart clears any background processes that may be causing the shutdown.
When a restart does not fix the problem
If you have restarted the camera twice and the same issue persists, try a different approach. Power off the camera completely and remove the battery for 30 seconds, then reinsert it and power on again. This is a deeper reset than a normal restart and sometimes clears problems that a straightforward restart cannot.
If the camera still does not work, check the GoPro support website for your specific model. Look for troubleshooting guides that match your exact problem—freezing, connection issues, and recording failures each have different solutions. You may also need to contact GoPro support directly if the camera appears to have a hardware fault.
Frequently Asked Questions
Will restarting my GoPro delete my videos or photos?
No. A restart only powers the camera off and back on. All your footage, photos, and settings remain exactly as they were. The camera will not erase anything during a restart, even if you force restart a frozen camera.
How long does a GoPro restart take?
A normal restart takes about 20 seconds total: three seconds to shut down, five seconds of waiting, and 10 to 15 seconds to boot back up. A force restart takes the same amount of time, but you hold the power button longer at the start.
What is the difference between a normal restart and a force restart?
A normal restart lets the camera shut down through its usual process. A force restart holds the power button longer and forces the system to stop when ready, bypassing the normal shutdown. Use a force restart only when the camera is completely frozen and will not respond to a normal restart.
Do I need to remove the battery to restart my GoPro?
No. Pressing and holding the power button is enough. You only need to remove the battery if a restart does not work and you want to try a deeper reset by leaving the battery out for 30 seconds.
Why does my GoPro keep freezing even after I restart it?
Repeated freezing after a restart usually means the camera needs a firmware update or there is a deeper software issue. Connect the camera to a computer, visit the GoPro support website, and check whether an update is available for your model. If freezing continues after an update, contact GoPro support for further help.