What Restoring Your GoPro Hero 3 Means
Restoring your GoPro Hero 3 to factory settings erases all your personal files, settings, and footage, then reloads the camera's original software. This is different from straightforward formatting the memory card — a restore wipes the camera's internal memory and resets every option to how it came from the factory. You would do this if the camera is freezing, refusing to turn on, not connecting to WiFi, or behaving unpredictably after a software update.
A restore takes about 10 to 15 minutes and requires a fully charged battery. After the restore completes, the camera will be blank and ready to set up again from scratch. Your footage will be gone unless you back it up first, so move any videos or photos you want to keep to a computer before you start.
Key Takeaways
- Back up all your footage to a computer before restoring, because the process erases everything on the camera.
- Charge the battery fully — a restore can take 10 to 15 minutes, and a dead battery mid-process can damage the camera.
- The restore menu is inside Settings, under System, and the option is labeled "Reset" or "Factory Reset" depending on your firmware version.
- After the restore finishes, the camera will restart and show the setup screen, and you can then reconfigure WiFi, date, and other preferences.
Charge the Battery Completely Before Starting
Plug the GoPro Hero 3 into a USB power source using the included cable. The camera should show a charging indicator — usually a blinking light on the front or back, depending on which Hero 3 model you have (Silver or Black). Let it charge until the light stops blinking and stays solid, which means the battery is full.
Do not attempt a restore with a low or partially charged battery. If power cuts out during the restore process, the camera's software can become corrupted and the camera may not turn on at all. A full charge gives you a safety margin in case the restore takes longer than expected or the camera needs to restart multiple times.
Back Up Your Footage Before You Proceed
Connect the GoPro to your computer using the USB cable. On Windows, the camera will appear as a removable drive in File Explorer. On Mac, it will show up on the desktop or in Finder. Open the drive and look for a folder called DCIM or PHOTO — this is where all your videos and photos are stored.
Copy the entire DCIM folder to a folder on your computer's hard drive or an external drive. This step takes a few minutes depending on how much footage you have. Once the copy is complete and you can see the files on your computer, you can safely proceed with the restore. If you skip this step, you will lose all your footage permanently.
Navigate to the Factory Reset Menu
Turn on the camera by pressing the power button on the side or back (location varies by model). Wait for the camera to fully boot — you should see the GoPro logo and then the main screen with the record button visible. Press the Mode button or the back button to enter the menu system. The exact button depends on your Hero 3 model, but it is usually on the back of the camera.
Once you are in the menu, scroll down to find "Settings" — it is usually one of the last options. Press the shutter button or the select button to open Settings. Look for an option called "System" or "General" and open it. Inside that submenu, you should see "Reset" or "Factory Reset." Press select to open it.
Confirm the Restore and Wait for Completion
The camera will show a warning message asking you to confirm that you want to erase everything. Read the message carefully — it will say something like "All data will be erased" or "Reset to factory defaults?" Press the button labeled "Yes" or the right arrow to confirm. Do not press the power button or remove the battery during this step.
The camera will now begin the restore. You may see a progress bar or a spinning icon on the screen. The process usually takes 10 to 15 minutes. The camera may restart one or more times — this is normal. Leave it alone and do not interrupt it. When the restore is complete, the camera will restart and show the initial setup screen with language and date options.
Set Up the Camera After the Restore
The camera will now walk you through the setup process. You will be asked to choose your language, set the date and time, and configure WiFi if you want to use the GoPro app. These steps are optional — you can skip them and set them up later. The important thing is that the camera is now running fresh factory software and should respond normally to button presses and power-on commands.
Insert a memory card if you removed it during the backup process. Format the card inside the camera by going to Settings > System > Format SD Card. This ensures the card and camera work together properly. You can now record video and take photos as usual.
Troubleshooting If the Restore Does Not Work
If the camera does not respond during the restore, or if it turns off before the process finishes, plug it back in to charge and try again. Make sure the battery is completely full before attempting a second restore. If the camera still will not complete the restore, the issue may be a corrupted memory card — try removing the card entirely and restoring the camera without it.
If the camera still will not turn on or respond after a restore attempt, the internal software may be damaged beyond what a factory reset can fix. In this case, you may need to contact GoPro support or visit an authorized repair center. Keep your proof of purchase handy if you contact support, as they may ask for it.
Frequently Asked Questions
Will a factory reset remove the GoPro app from my phone?
No. The reset only affects the camera itself. Your phone and the GoPro app are separate. After the restore, you can reconnect the camera to the app by going to Settings > WiFi on the camera and pairing it again.
Can I restore the camera without a computer?
Yes. You do not need a computer to perform the restore itself — you do it entirely on the camera using the menu buttons. However, you should back up your footage to a computer before you start, so you will need a computer at some point if you want to keep your videos.
How long does the restore actually take?
The restore usually takes 10 to 15 minutes from start to finish. The exact time depends on how much data is on the camera and which Hero 3 model you have. Do not interrupt it or remove the battery during this time.
What if I forgot to back up my footage?
Once the restore completes, your footage is gone and cannot be recovered through normal means. If the footage is critical, you can contact a data recovery service, but this is expensive and not always successful. In the future, back up your footage before attempting any major changes to the camera.
Do I need to update the firmware after a restore?
Not when ready. The restore loads the firmware version that came with your camera originally. You can check for firmware updates later by connecting the camera to a computer and visiting the GoPro website, but it is not required to use the camera.