Unbox and charge your GoPro before you film anything
When you open a new GoPro, the battery inside is partially charged but not ready to use. Before you take it anywhere, plug the camera into a USB power source using the cable that came in the box. A full charge takes about two hours. While it charges, remove the protective film from the lens and familiarize yourself with the physical buttons: the power button on top, the mode button on the back, and the shutter button on the front.
The battery door is on the bottom of the camera. Open it by sliding the latch toward the back, and you will see the battery slot and the SD card slot next to it. An SD card is required to record video — the camera will not function without one. Most GoPro models work with microSD cards rated for video (look for "V30" or higher on the card itself), and a 64GB or 128GB card gives you plenty of space for multiple recording sessions.
Key Takeaways
- Charge the battery fully before your first use, which takes about two hours with the included USB cable.
- Insert a microSD card (V30 rated or higher) into the slot on the bottom of the camera before you power it on.
- Turn on the camera and connect it to the GoPro app on your phone to adjust settings like resolution, frame rate, and field of view.
- Mount the camera securely using the appropriate mount for your activity — helmet, chest, or handheld — and test the angle before you start recording.
- Press the shutter button on the front of the camera to start and stop recording; a red light on the back indicates the camera is actively filming.
Insert the SD card and power on the camera
Slide the microSD card into the slot on the bottom of the camera with the gold contacts facing toward the back of the camera. Push it in until you hear a click — it should sit flush with the camera body. Close the battery door by sliding the latch forward until it clicks. Now press and hold the power button on top of the camera for three seconds. The screen on the back will light up, and you will hear a startup sound.
The first time you power on the camera, it will ask you to set the date and time. Use the mode button to navigate the menu and the shutter button to select. Getting the date and time correct matters because it stamps every video file with that information, which helps you organize recordings later. After you set the date and time, the camera is ready to record, but you should adjust the video settings before you mount it.
Connect to the GoPro app and adjust your recording settings
read the GoPro app on your smartphone (available for both iOS and Android). Open the app and tap the camera icon to connect to your GoPro via Bluetooth. The first time you connect, the app will ask you to confirm the pairing on the camera itself — press the shutter button to confirm. Once connected, the app shows a live preview of what the camera sees and gives you access to all the recording settings without touching the camera buttons.
The three settings you will adjust most often are resolution (how sharp the video is), frame rate (how many frames per second, measured in fps), and field of view (how wide the lens captures). For most everyday recording, 1080p at 60fps is a solid starting point — it produces smooth, clear video without eating up your SD card too quickly. If you are recording fast action like skiing or mountain biking, 1440p at 60fps or 1080p at 120fps gives you slow-motion options in editing. The field of view options are typically "Wide" (captures the most area), "Linear" (reduces the fisheye distortion), and "Narrow" (zooms in). Start with Wide unless you are filming something where you want less distortion, like a talking-head video.
Other useful settings to check: turn on HyperSmooth (electronic stabilization) if your camera has it — this smooths out shaky footage from handheld or vehicle recording. Set Auto Low Light to on if you plan to film indoors or in dim conditions. Leave Protune off unless you plan to color-grade your footage in editing software; it gives you more control but requires more work later.
Choose and attach the right mount for your activity
GoPro cameras ship with a curved adhesive mount and a flat adhesive mount, both of which stick permanently to helmets, boards, or vehicles. If you are mounting to a helmet, the curved mount follows the helmet's shape better. If you are mounting to a flat surface like a car hood or a skateboard, use the flat mount. Clean the surface with rubbing alcohol and let it dry completely before you stick the mount down — a dirty surface will not hold the adhesive.
If you do not want to use adhesive mounts, GoPro sells a separate mounting system with a ball joint that attaches to various arms and clips. This system lets you move the camera between different setups without buying multiple mounts. For your first recording, the adhesive mounts that came in the box are fine. Screw the camera onto the mount by turning it clockwise until it is snug — do not over-tighten, or you risk stripping the threads.
Before you start recording, position the camera and test the angle by looking at the live preview in the app or by pressing the power button to turn on the screen. The camera should frame what you actually want to capture. Tilt the mount slightly if needed, then power off the camera and you are ready to film.
Start recording and monitor the camera during use
Press the shutter button on the front of the camera to start recording. A red light on the back of the camera will turn on, and you will hear a beep. The screen on the back will show a timer counting up the length of your recording. If you mounted the camera where you cannot see the screen, you can monitor the recording from the GoPro app on your phone — it will show the live feed and the timer, and you can stop recording remotely if needed.
The camera will record continuously until you press the shutter button again to stop. If the battery runs low, the camera will beep three times and shut down automatically, so keep an eye on the battery indicator in the top-left corner of the screen. If you are filming for longer than one hour, bring a second charged battery or a portable charger with a USB cable so you can swap batteries or top up the charge without stopping.
Transfer your videos to your phone or computer
After you finish recording, connect the camera to your phone via the GoPro app and tap the media icon to see all the videos on your SD card. You can preview them and read the ones you want to your phone for editing or sharing. Alternatively, connect the camera to a computer using the USB cable, and the SD card will appear as a removable drive. You can drag and drop video files to your computer's hard drive or an external storage device.
Video files are large — a one-minute 1080p video at 60fps takes up roughly 150 to 200 megabytes of space. Keep track of how much space is left on your SD card before you film, and format the card inside the camera (not on your computer) if you want to reuse it. Formatting erases all files, so transfer your videos first.
Troubleshoot common setup problems
If the camera will not turn on, the battery may not be fully charged. Plug it in for another 30 minutes and try again. If the camera turns on but will not record, check that an SD card is inserted and that it is not full. The camera will show a message on the screen if the card is full or not detected.
If the app will not connect to the camera, make sure Bluetooth is turned on in your phone's settings and that the camera is powered on. Forget the camera from your phone's Bluetooth settings and try pairing again. If the video looks blurry or distorted, the lens may have dust or condensation on it — wipe it gently with a soft, dry cloth. If you are filming in cold weather and the lens fogs up, let the camera warm up indoors for 15 minutes before you use it again.
Frequently Asked Questions
Do I need the GoPro app to use the camera?
No. You can turn on the camera, press the shutter button to record, and press it again to stop without ever opening the app. The app is useful for adjusting settings and previewing footage, but the camera works as a standalone device. You can change basic settings using the mode button and shutter button on the camera itself if you prefer not to use your phone.
What happens if I record without an SD card?
The camera will power on and appear to work, but it will not record anything. The screen will show a message saying no SD card is detected. Always insert and format an SD card before you plan to film.
How long does the battery last during recording?
A fully charged battery typically lasts 60 to 90 minutes of continuous recording, depending on the resolution, frame rate, and whether features like HyperSmooth are enabled. Higher resolutions and frame rates drain the battery faster. If you are filming for longer sessions, bring a second battery or a portable charger.
Can I use any microSD card, or does it have to be a specific brand?
Any microSD card rated V30 or higher will work, but faster cards (rated U3 or V60) are more reliable for high-resolution video. Avoid very cheap or old cards — they may drop frames or corrupt files. SanDisk, Samsung, and Kingston are reliable brands that work well with GoPro cameras.
What should I do if the camera gets wet?
GoPro cameras are waterproof up to 33 feet without a housing, so light rain or splashing is not a problem. If you submerge the camera or expose it to saltwater, rinse it with fresh water and let it dry completely before you power it on again. Dry the battery door and all seams carefully to prevent water from entering the electronics.