The quickest way to power down your GoPro

To turn off your GoPro, press and hold the power button (the circular button on the top or side of the camera, depending on your model) for about three seconds until the screen goes black and the LED lights stop blinking. The camera is off when there is no light or display activity.

If your GoPro is in sleep mode instead of fully powered down, holding the power button will wake it again rather than shut it off completely. Sleep mode uses less battery than being fully on, but the camera will still drain power slowly over time. For storage lasting weeks or months, a full shutdown is better.

Some GoPro models have a physical power switch rather than a button you hold. Check your camera's manual or the physical controls on your device to confirm which type you have—the method is the same, but the location and feel will differ slightly.

Key Takeaways

  • Press and hold the power button for three seconds until the screen goes dark and all lights stop blinking.
  • Sleep mode uses less power than being fully on but still drains the battery over weeks or months.
  • If your camera has a physical power switch instead of a button, slide it to the off position.
  • A fully powered-down GoPro will not respond to any button presses until you turn it back on.
  • Removing the battery is the only way to stop all power drain if you plan to store the camera for several months or longer.

Sleep mode versus full shutdown

Sleep mode activates automatically after your GoPro sits idle for a set time (usually a few minutes), or you can trigger it manually by pressing the power button once. In sleep mode, the screen is off and the camera uses very little power, but the internal clock and some sensors stay active. If you plan to use the camera again within a few days, sleep mode is convenient because the camera wakes when ready when you press the power button.

Full shutdown, triggered by holding the power button for three seconds, stops nearly all power draw except for a tiny trickle used by the internal battery itself. If you are storing the camera for a week or longer without using it, full shutdown will preserve more battery charge than sleep mode. The trade-off is that waking the camera from full shutdown takes a few seconds longer than waking it from sleep.

What to do before powering down

Before you turn off your GoPro, make sure any recording or file transfer is complete. If you are moving video files to a computer or phone, wait for the transfer to finish—powering down during a transfer can corrupt the files or leave them incomplete on the camera's memory card.

If your GoPro was recording when you powered it down, the last few seconds of video may not save properly. Always stop recording first by pressing the shutter button, wait a moment for the camera to finish writing the file, and then power down.

Removing the battery for long-term storage

If you plan to store your GoPro for several months without using it, removing the battery is the best way to prevent any power drain. Even when fully powered down, the battery will lose a small amount of charge over time. A battery left in a powered-down camera for six months or longer may lose enough charge that it will not hold power when you try to use the camera again.

To remove the battery, power down the camera first, then open the battery door (usually on the bottom or side of the camera) and slide the battery out. Store the battery in a cool, dry place—not in a hot car or damp basement. Before you use the camera again, reinsert the battery and charge it fully.

Troubleshooting a camera that won't turn off

If your GoPro does not respond when you hold the power button, the battery may be completely drained. Connect the camera to a charger using the USB cable and let it charge for at least 30 minutes, then try the power button again.

If the camera still does not respond after charging, try a hard reset by holding the power button for 10 seconds instead of three. Some models have a reset button on the back or inside the battery door—check your manual to see if yours does. If the camera remains unresponsive, the internal hardware may need service from GoPro support.

Why your GoPro might not stay off

If your camera powers back on by itself shortly after you turn it off, the power button may be stuck or the internal power switch may be faulty. Try pressing the power button several times in quick succession to make sure it is not stuck in a partially pressed position.

Some GoPro models have a setting that wakes the camera when you connect it to a charger or USB cable. If your camera turns on whenever you plug it in, this is normal behavior and not a malfunction. You can usually disable this in the camera's settings menu under Power or Startup options.

Frequently Asked Questions

How long does it take for a GoPro to fully power down?

Once you release the power button after holding it for three seconds, the camera shuts down almost when ready. The screen goes black and the LED lights stop within a second or two. There is no waiting period.

Will my GoPro lose video files if I turn it off?

No. Video files are saved to the memory card as soon as recording stops, so turning off the camera will not erase them. However, if you power down while the camera is actively recording or transferring files, those specific files may be corrupted or incomplete.

Can I turn off my GoPro while it is charging?

Yes. You can power down your GoPro while it is plugged into a charger. The battery will continue to charge even though the camera is off. Some models will automatically power on when you connect the charger, but you can turn them off again without stopping the charge.

What is the difference between turning off and restarting my GoPro?

Turning off means powering down completely until you press the power button again. Restarting (or rebooting) means powering down and back on in quick succession. Restart your camera if it is frozen or behaving strangely, but a normal shutdown is all you need when you are done using it.

Does turning off my GoPro save battery faster than sleep mode?

Yes, full shutdown uses far less power than sleep mode over time. For storage lasting more than a few days, full shutdown will preserve significantly more battery charge. If you are using the camera again within a day or two, sleep mode is more convenient and the battery difference is minimal.