Press and hold the power button on the back of the camera
The power button is a small circular button on the back of your GoPro, usually near the bottom right corner. Press and hold it for about three seconds until you see the GoPro logo appear on the screen and hear a startup sound. The camera will take another few seconds to fully boot up — you'll know it's ready when the screen shows the main menu or live preview.
If the camera doesn't respond, the battery may be empty. Plug the camera into a USB charger using the cable that came in the box, wait 10 to 15 minutes, and try again. A completely dead battery sometimes needs a few minutes of charging before the camera will power on at all.
Key Takeaways
- Hold the power button on the back of the camera for three seconds until the GoPro logo appears on screen.
- The startup process takes a few seconds total — wait until the main menu or live preview appears before you start recording.
- If nothing happens, charge the battery for at least 10 to 15 minutes using the USB cable included with your camera.
- Once the camera is on, you can start recording when ready by pressing the shutter button on the top or front of the device.
What happens after the camera powers on
Once the startup is complete, your GoPro will show either the live preview (what the camera sees) or the main menu screen. If you see the live preview, the camera is ready to record — just press the shutter button (usually on the top or front) to start. If you see the menu instead, you can navigate to settings, change video resolution, or adjust other options before you record.
The screen will stay on for a set amount of time before turning off to save battery. You can wake it again by pressing any button. If you want the screen to stay on longer, you can adjust the screen timeout setting in the camera's menu, though this will drain the battery faster.
Charging before your first use
If this is your first time using the camera, charge it fully before powering on. Connect the USB-C cable (or the charging cable that came with your specific model) to the camera and plug the other end into a wall charger or computer. A full charge usually takes one to two hours, depending on the model and charger type.
You'll see a charging indicator on the screen or a light on the camera body. Once the battery is full, the indicator will change or the light will turn off. Disconnect the cable and you're ready to power on and use the camera.
Troubleshooting if the camera won't turn on
If you hold the power button and nothing happens, try these steps in order. First, charge the camera for at least 15 minutes — a completely drained battery may not respond when ready. Second, make sure you're pressing the correct button; on some models it's straightforward to confuse the power button with the shutter button. Third, try a hard reset by holding the power button for 10 seconds instead of three.
If the camera still won't power on after charging and a hard reset, the battery itself may be faulty. Try removing the battery (if your model allows it) and reinserting it firmly, making sure it clicks into place. If you have access to a different GoPro battery, test with that to rule out a battery problem. If nothing works, contact GoPro support with your camera model and serial number.
Keeping the camera on while you record
Once the camera is on and you've started recording, it will stay powered on as long as the battery has charge. The screen will turn off after the timeout period you set, but the camera will keep recording in the background. You don't need to do anything — just let it run.
If you want to stop recording, press the shutter button again. The camera will save the video file and return to the menu or live preview. You can then power off by holding the power button for three seconds, or leave it on to record again when ready.
Battery life and power management
How long your GoPro stays on depends on the battery capacity and what you're recording. Recording in high resolution or using features like image stabilization drains the battery faster than recording in lower resolution. Most GoPro batteries last between one and three hours of continuous recording, depending on the model and settings.
To extend battery life, turn off the screen when you're not adjusting settings, use lower resolution if the situation allows, and turn off features you don't need. Keep a second battery charged and ready so you can swap it out when the first one runs low. Many users carry two or three batteries when they plan to record all day.
Frequently Asked Questions
How long does it take for a GoPro to turn on?
From the moment you press the power button, it takes about three to five seconds for the camera to fully boot up and show the live preview or menu. If it takes longer than 10 seconds, release the button and try again.
Can I turn on my GoPro while it's charging?
Yes, you can power on the camera while it's plugged in and charging. The camera will run normally, and the battery will continue to charge in the background. This is useful if you want to test the camera or adjust settings while it charges.
What if the power button is stuck or hard to press?
If the button feels stuck, don't force it — you may damage the internal mechanism. Try gently pressing it at different angles. If it remains stuck, the button may need professional repair. Contact GoPro support with your camera model and describe the problem.
Does the camera turn off automatically if I don't use it?
Most GoPro models have an auto-off feature that powers down the camera after a set period of inactivity, usually 5 to 30 minutes depending on your settings. You can adjust or disable this feature in the camera's menu if you want the camera to stay on longer.
Why does my GoPro turn off right after I turn it on?
This usually means the battery is too low to keep the camera running. Charge it for at least 20 minutes and try again. If it keeps shutting off even after a full charge, the battery may be defective or the camera may have a hardware issue — contact GoPro support.