Check the LED light on the camera body
The simplest way to know your GoPro is charging is to look at the LED indicator light on the back or side of the camera. When you plug in the USB cable, a red light means the battery is actively charging. This light stays on until the battery reaches full capacity, then it turns off or changes color depending on your model.
The exact location of this light varies by GoPro generation. On Hero 11 and Hero 10 models, it's on the back near the screen. On older models like the Hero 9, it may be on the side. Check your camera's manual or the GoPro website for your specific model if you're unsure where to look.
If you don't see any light at all when the cable is connected, the battery may not be making proper contact with the charging port, or the power source itself isn't working.
Key Takeaways
- A red LED light on your GoPro indicates the battery is actively charging and will turn off when fully charged.
- The location of the charging indicator light differs by model, so check your camera's manual to find yours.
- A blinking or amber light usually means the battery is low or there's a connection problem, not that charging is happening normally.
- GoPro cameras charge fastest when connected to a wall outlet with the original cable rather than a computer USB port.
- If no light appears when plugged in, try a different power source or cable before assuming the battery is damaged.
Understand what different light colors mean
GoPro cameras use different LED colors to tell you the charging status. A steady red light means charging is in progress. An amber or orange light that blinks usually signals a low battery or a loose connection — the camera may not be charging properly even though it's plugged in.
Once the battery reaches full charge, the light turns off completely on most models. Some newer GoPros may show a green light to indicate a fully charged battery, though this varies. If the light keeps blinking amber after several minutes, unplug the cable, wait 30 seconds, and plug it back in to reset the connection.
If you see no light at all, the issue is usually either a bad cable, a dirty charging port, or a power source that isn't delivering electricity. Try plugging the camera into a different outlet or using a different USB cable if you have one available.
Check the battery percentage on the camera screen
Most GoPro models display the battery level on the back screen or in the viewfinder. Turn on your camera and look for a battery icon, usually in the top corner of the display. This icon shows how much charge remains as a percentage or as a visual bar.
While the camera is plugged in and charging, watch this percentage increase over time. If it stays the same after several minutes of being connected, the charging connection may not be working. This is especially useful if the LED light is hard to see in bright sunlight or if you're not sure whether the light is actually on.
Keep in mind that the screen itself uses battery power, so leaving it on while charging will slow down the process. For the fastest charge, power off the camera before plugging it in.
Use the correct charging cable and power source
GoPro cameras charge through a USB-C port on newer models (Hero 11, Hero 10, Hero 9) or a proprietary charging cable on older ones. Using the original cable that came with your camera is always the safest choice, though any certified USB-C cable will work with newer models.
The power source matters too. A wall outlet with a USB adapter delivers power much faster than a computer's USB port. Most computers provide only 0.5 amps of power, while a standard wall charger provides 1 to 2 amps. If you're charging from a laptop, the process will take significantly longer, and the LED light may not appear at all if the port is underpowered.
For the fastest charging, plug your GoPro into a wall outlet using the original cable or a high-quality USB-C cable rated for at least 2 amps. Avoid cheap third-party cables, which may not deliver consistent power and can damage the battery over time.
Clean the charging port if the light won't appear
Dust, sand, or moisture inside the USB port can prevent the camera from recognizing that it's plugged in. If you've tried multiple cables and power sources and still see no LED light, the port itself may be dirty.
Turn off the camera and inspect the port with a flashlight. If you see debris, use a dry cotton swab or a soft brush to gently clean inside the port. Do not use water or compressed air, as moisture can damage the internal components. Let the port air-dry for at least 30 minutes before trying to charge again.
If cleaning doesn't work and the camera still won't charge, the port may be physically damaged. This is a hardware issue that typically requires professional repair or replacement.
Know how long a full charge takes
A GoPro battery usually takes 1.5 to 3 hours to charge completely from empty, depending on the model and the power source you're using. Charging from a wall outlet is faster than charging from a computer. If you're using a low-power source like an older laptop or a phone charger rated below 1 amp, expect the process to take longer.
The red LED light will stay on the entire time the battery is charging. Once it reaches full capacity, the light turns off. If the light is still on after 4 hours, something is wrong — either the battery is damaged, the cable is faulty, or the port isn't making good contact.
For reference, most GoPro batteries hold enough charge for 1 to 2 hours of continuous recording, depending on resolution and frame rate settings. Plan your charging time accordingly if you're preparing for a shoot.
Troubleshoot when the camera won't charge
If your GoPro shows no signs of charging after trying multiple cables and outlets, work through these steps in order. First, power off the camera completely and wait 2 minutes. Then plug it into a wall outlet using the original cable. If no light appears after 5 minutes, try a different wall outlet in a different room to rule out a circuit breaker issue.
Next, inspect both the cable and the charging port for visible damage. Look for bent pins inside the port, frayed cable insulation, or corrosion around the connector. If the cable looks damaged, do not use it — a faulty cable can harm the battery.
If you have access to another GoPro or another USB-C device, try charging that device with your cable to see if the problem is the cable or the camera. If a different device charges fine with your cable, the issue is with your camera's port or battery, and you'll need to contact GoPro support or visit an authorized repair center.
Frequently Asked Questions
Why is my GoPro showing a red light but not charging?
A red light usually means charging is happening, but if the battery percentage isn't increasing after 10 minutes, the connection may be loose. Try unplugging the cable, waiting 30 seconds, and plugging it back in firmly. If the light is blinking amber instead of solid red, clean the charging port with a dry cotton swab and try again.
Can I charge my GoPro with any USB-C cable?
Yes, any certified USB-C cable will work with Hero 9, Hero 10, and Hero 11 models. However, the original cable is always the safest choice. Avoid very cheap third-party cables, as they may not deliver consistent power or could damage the battery. Make sure the cable is rated for at least 2 amps if you want fast charging.
Is it normal for the LED light to turn off before the battery is full?
No. The LED light should stay on continuously until the battery reaches 100 percent, then turn off. If the light turns off before the battery is full, unplug the cable and plug it back in. If it keeps turning off early, the cable or port may have a connection problem.
How do I know if my GoPro battery is dead and won't charge?
Try charging for at least 2 hours with the original cable plugged into a wall outlet. If no LED light appears and the battery percentage doesn't increase, the battery may be damaged. Contact GoPro support or visit an authorized repair center to have the battery tested and replaced if necessary.
Can I use my GoPro while it's charging?
Yes, you can use your GoPro while it's plugged in, but the battery will charge much more slowly because the camera is drawing power at the same time. For the fastest charge, power off the camera before plugging it in and leave it off until the LED light turns off.