Look for the LED light on the camera body

The most direct way to know your GoPro is charging is to watch the LED indicator light on the camera itself. When you plug in a GoPro Hero 11, Hero 10, or most recent models, a small light near the USB port or on the back of the camera will turn on. A solid red or amber light means the battery is actively charging. A blinking light usually means the camera is powered on while charging, or that charging is nearly complete.

The exact color and behavior depend on your model. Older GoPro cameras like the Hero 9 or Hero 8 use a similar system but may display slightly different colors. Check your camera's manual or the GoPro support website for your specific model number to confirm what each light pattern means — the information is usually in the first few pages under "LED indicators" or "battery status".

If no light appears at all when you plug in the camera, the battery may be completely drained, the cable may be faulty, or the charging port may have a connection problem. Try a different USB cable first, since that is the most common cause of a no-light situation.

Key Takeaways

  • A solid red or amber LED light on your GoPro means the battery is actively charging and you can leave it plugged in.
  • A blinking light usually signals that charging is nearly done or that the camera is on while charging.
  • No light at all often points to a loose cable connection or a worn charging port, so try a different USB cable before assuming the battery is broken.
  • Charging time varies by model and cable type, but most GoPro batteries reach full charge in two to three hours using the official charger.
  • The GoPro app on your phone will also show battery percentage if the camera is connected via Bluetooth, giving you a second way to track charging progress.

Check the battery percentage in the GoPro app

If you have the GoPro app installed on your phone, you can pair your camera via Bluetooth and see the exact battery percentage without looking at the camera itself. Open the app, tap the camera icon or settings menu, and look for "Battery" or "Device Info." The app displays the current charge level as a percentage, which is more precise than reading an LED light.

This method works even if the camera is off or if the LED light is hard to see in bright sunlight. The app updates the battery reading every few seconds once connected, so you can watch the percentage climb as the camera charges. If the app shows 0% and does not update after several minutes of charging, the battery may be too depleted to communicate with the phone, which is normal — give it another 15 to 20 minutes and check again.

Understand what each LED light pattern means

GoPro cameras use a straightforward color code to tell you what is happening. A solid red light is the most common sign of active charging — the battery is drawing power and filling up. A blinking red light usually means the camera is on and charging at the same time, or that the battery is almost full. Once the battery reaches 100%, the light may turn off entirely or switch to a different color depending on your model.

Some newer models use an amber or orange light instead of red, especially if the camera is powered on during charging. The behavior is the same: solid means actively charging, blinking means nearly done or powered on. If the light is blue or white, the camera is likely on and connected to the app or another device, not charging.

If the light does not appear after 30 seconds of plugging in, unplug the cable, wait 10 seconds, and try again. Sometimes the connection needs a moment to register. If it still does not light up, the issue is likely the cable, the port, or a battery that has been drained so completely it cannot respond.

Test the charging cable and port

A broken or loose cable is the reason most GoPro owners think their camera will not charge. Start by inspecting the USB cable for visible damage — frayed wires, bent connectors, or discoloration near the plug. If the cable looks fine, try plugging it into a different power source: a different wall outlet, a computer USB port, or a different power bank. If the camera charges with a different cable, your original cable is faulty and needs to be replaced.

Next, look at the charging port on the camera itself. Use a flashlight and peer inside the port to check for lint, dirt, or corrosion. If you see debris, use a dry cotton swab or a small brush to gently clean the inside of the port. Do not use water or liquid cleaners, as moisture can damage the electronics. After cleaning, plug in the cable again and watch for the LED light.

If the camera still will not charge with a known-good cable and a clean port, the charging circuit inside the camera may be damaged. Contact GoPro support or visit an authorized repair center. Do not attempt to open the camera yourself, as this will void any warranty and can damage the waterproof seal.

Know how long a full charge takes

Most GoPro batteries reach full charge in two to three hours when using the official GoPro charger or a standard USB power adapter rated for at least 2 amps. Charging via a computer USB port takes longer — often four to five hours — because computer ports deliver less power. A portable power bank charges the camera at roughly the same speed as a wall outlet, depending on the power bank's output rating.

The camera's LED light will stay solid red or amber for most of the charging time, then blink as it approaches 100%. Once the light turns off or changes color, the battery is full. You can unplug the camera at this point; leaving it plugged in after it reaches full charge does not damage the battery, but it is not necessary.

If charging takes much longer than three hours with an official charger, the battery may be aging or the charger may be delivering less power than it should. Older batteries naturally charge more slowly over time. If a new battery still charges slowly, the charger itself may be failing.

Verify the power source is working

Before you assume the camera or cable is broken, confirm that the power source itself is actually on and delivering electricity. Plug a phone charger, lamp, or another device into the same outlet or power bank you are using for the GoPro. If that device charges or turns on, the power source is fine. If nothing works, the outlet may be controlled by a wall switch, or the power bank may be drained.

If you are using a computer USB port, make sure the computer is powered on and not in sleep mode. Some computers disable USB ports when the system sleeps. Wake the computer and try again. If you are using a power bank, check its own battery level — a power bank with very low charge may not deliver enough power to charge the GoPro, even though it still has a little power left for its own LED light.

Frequently Asked Questions

What does a blinking red light mean on my GoPro?

A blinking red light usually means the battery is nearly full, or that the camera is powered on while charging. Either way, charging is still happening. If the light blinks for more than 30 minutes without changing to solid or turning off, unplug the cable and try a different one, as the original cable may be loose or damaged.

Can I use any USB cable to charge my GoPro?

Any USB cable with the correct connector type will physically fit and may deliver some power, but GoPro recommends using the official cable or a high-quality third-party cable rated for at least 2 amps. Cheap or damaged cables charge slowly or not at all, even if they look fine. If charging is slow or inconsistent, try the official GoPro cable.

How do I know if my GoPro battery is dead?

A completely dead battery will not show any LED light when you first plug it in. Wait 15 to 20 minutes — a deeply drained battery sometimes needs time to wake up before the light appears. If no light shows after 20 minutes with a known-good cable and power source, the battery or charging circuit may be damaged.

Can I charge my GoPro while recording?

Yes, you can charge the GoPro while it is recording or powered on. The LED light will blink instead of staying solid, and charging will be slightly slower because the camera is using some of the incoming power. This is normal and does not damage the battery or camera.

Why is my GoPro charging very slowly?

Slow charging usually means the cable is delivering less power than it should, the power source is weak, or the battery is old. Try a different cable and a wall outlet instead of a computer port. If a new cable and wall outlet do not speed up charging, the battery itself may be aging and needs replacement.