The quickest way to power down your Hero 5
Press and hold the power button on the back of the camera for three seconds. The screen will go black, and the camera will shut down. The power button is the small button on the rear panel, just above the battery door. You do not need to hold it longer than three seconds — the camera will power off once it registers the hold.
If the camera is in standby mode (screen off but still drawing power), a three-second hold will turn it completely off. If it is actively recording or in use, the same three-second hold works; the camera will stop whatever it is doing and shut down. This method works regardless of what the camera was doing before you pressed the button.
Key Takeaways
- Hold the power button on the back of the camera for three seconds to turn it off completely.
- The power button is located just above the battery door on the rear panel.
- You do not need to remove the battery or memory card to power down the camera.
- Powering off the camera extends battery life when you are not using it, since standby mode still consumes power.
- All your footage remains on the memory card after shutdown and will be there when you power the camera back on.
Why you should power off instead of leaving it in standby
The Hero 5 draws power even when the screen is off and the camera is not recording. This is called standby mode, and it will drain your battery over hours or days if you leave the camera in this state. Turning the camera completely off stops all power draw except the minimal drain from the battery itself sitting unused.
If you plan to use the camera again within an hour or two, standby mode is fine. If you are storing the camera for a day or longer, power it off. This is especially important if you are traveling or on a trip where you cannot charge the battery easily. A fully powered-off camera can sit for weeks without significant battery loss.
What happens to your footage when you power off
Turning off the camera does not delete any video or photos. All footage recorded before the shutdown stays on the memory card. The next time you power on the camera, your files will be there unchanged.
The camera does not need to finish any save process before you turn it off. Once you press the power button, the Hero 5 stops recording when ready and shuts down without requiring you to wait. The file is written to the card as soon as recording stops, so there is no risk of losing footage by powering down.
Powering off during recording
If you hold the power button while the camera is actively recording, the recording will stop and the file will be saved. You do not lose the footage you captured before pressing the button. The camera will then power down completely.
This is safe to do — the Hero 5 is designed to handle power-offs during recording without corrupting the file. However, if you want to stop recording without powering off the camera, press the shutter button instead. This lets you keep the camera on for the next shot without having to power it back up.
Battery removal as an alternative shutdown method
You can also power off the camera by removing the battery. Open the battery door on the back of the camera and slide the battery out. This is a harder shutdown than using the power button, but it works if the power button is not responding or stuck.
Removing the battery is not necessary for normal use — the power button is the standard way to shut down the Hero 5. Use battery removal only if the button is stuck, unresponsive, or the camera is frozen and not responding to button presses. When you reinsert the battery, the camera will be completely powered off and ready for a fresh start.
Checking the power status before you leave
After you press the power button, wait a few seconds to confirm the screen has gone dark and stayed dark. If the screen turns back on or shows any light, the camera did not shut down. Try holding the power button again for a full three seconds.
Some users accidentally tap the button instead of holding it, which can put the camera into a different mode rather than powering it off. A firm, steady three-second hold is more reliable than a quick press. If you are unsure whether the camera is off, the screen will be completely black with no indicator lights visible.
Frequently Asked Questions
Does the Hero 5 have a sleep mode separate from power off?
The Hero 5 has standby mode, which turns off the screen but keeps the camera drawing power. There is no separate sleep mode. To stop power draw completely, you must power off the camera using the three-second button hold.
Will the camera turn off automatically if I do not use it?
The Hero 5 does not have an automatic shutdown timer. The camera will stay on or in standby until you manually power it off. You must press the power button yourself to turn it off.
What if the power button is stuck or broken?
Remove the battery by opening the battery door on the back of the camera and sliding the battery out. This will shut down the camera completely. If the button stays stuck, you may need to have the camera serviced or replaced.
Can I turn off the camera while it is connected to a computer?
Yes. Disconnect the USB cable first, then press and hold the power button for three seconds. The camera will power off normally. Do not remove the battery while the camera is connected to a computer, as this can interrupt data transfer.
How long does it take for the camera to fully power down?
The Hero 5 powers down within one to two seconds of the three-second button hold. Once the screen goes black, the camera is off. You do not need to wait any longer before putting it away or removing the battery.