The simplest way to power down your GoPro Hero
Press and hold the power button for three seconds until the screen goes black and you see or hear a power-down confirmation. On most GoPro Hero models, the power button is on the top or side of the camera — check your specific model's manual if you're unsure which button it is. The camera will shut down completely, and the LED indicator light will turn off.
If your GoPro is in standby mode (screen dark but camera still drawing power), holding the power button will wake it first, then power it down. This is normal — just keep holding until the shutdown completes. The whole process takes about three to five seconds from start to finish.
Key Takeaways
- Hold the power button for three seconds to turn off your GoPro Hero completely.
- The power button location varies by model, so check your manual if you cannot find it on the top or side of the camera.
- Standby mode still drains battery, so power down completely if you will not use the camera for several hours.
- Turning off the camera before charging extends battery lifespan compared to charging while powered on.
- If the camera is frozen or unresponsive, remove the battery for 30 seconds and reinsert it to force a shutdown.
Why you should power down instead of leaving it in standby
GoPro Hero cameras enter standby mode automatically after a few minutes of inactivity, which reduces power drain but does not stop it completely. A camera left in standby for hours or days will lose battery charge, even if you are not recording. Powering down fully cuts power consumption to nearly zero, which matters if you plan to store the camera for a week or longer.
Turning off the camera before you charge it also helps the battery last longer over time. Charging a powered-on camera generates more heat, and repeated heat exposure degrades lithium batteries faster than charging a powered-off camera does.
What to do if the power button does not respond
If holding the power button does nothing and the camera appears frozen, remove the battery entirely. Open the battery door (usually on the side or bottom of the camera), slide the battery out, and wait 30 seconds. Reinsert the battery and close the door — this forces a complete shutdown and often clears minor software glitches that prevent normal power-down.
If the camera still will not respond after a battery reset, connect it to a computer or charger and let it sit for 15 minutes. Sometimes a completely drained battery needs a small charge before the camera will respond to any input. After 15 minutes, try the power button again.
Checking battery level before you power down
Most GoPro Hero models show battery percentage on the screen when you power on the camera or press the power button once to wake it from standby. Look at the top or bottom corner of the display — you will see a battery icon with a number or a filled bar. If the battery is below 10 percent, the camera may shut down unexpectedly during your next recording session.
Charge the camera as soon as the battery drops below 20 percent if you plan to use it within the next few days. This keeps the battery in the middle of its usable range, which extends its overall lifespan.
Powering down before storage or travel
Always power down your GoPro completely before packing it away for more than a few days. A camera left powered on or in standby in a bag or case can overheat, drain the battery completely (which can damage lithium batteries), or accidentally start recording and waste storage space.
Before you store the camera, power it down, remove the battery if you will not use it for more than two weeks, and store both in a cool, dry place. Batteries stored with a partial charge (around 50 percent) last longer than batteries stored fully charged or completely empty.
Difference between power down and screen timeout
Your GoPro Hero has two separate settings: the power button (which turns the whole camera off) and the screen timeout (which turns off the display after a set time but leaves the camera running). If you press the power button once, the screen may go dark, but the camera is still on and recording or in standby mode. You must hold the power button for three seconds to actually power down the entire device.
Check your camera's settings menu if you want to change how long the screen stays on before it times out. This does not affect how you turn the camera off — the three-second power button hold always powers down the whole camera, regardless of screen timeout settings.
Frequently Asked Questions
Will turning off my GoPro delete my footage?
No. Powering down the camera does not delete any video or photos stored on the memory card. All your footage remains on the card until you manually delete it or format the card in the camera's settings menu.
Can I turn off the camera while it is recording?
You can, but the camera will stop the current recording when ready and may not save the last few seconds of video. It is better to stop recording using the record button first, then power down. This ensures the file is written to the memory card completely.
How long does the battery last if I leave the camera powered off?
A powered-off GoPro Hero battery loses almost no charge over weeks or months. If you store the camera with the battery inside and powered off, the battery will retain most of its charge for two to three months. Remove the battery if you plan to store the camera for longer than that.
What if my GoPro powers off by itself during use?
The camera usually powers off on its own when the battery is critically low (below 1 percent). If this happens frequently, the battery may be failing and need replacement. Try charging the camera fully and testing it again. If it still shuts down unexpectedly, contact GoPro support or replace the battery.
Do I need to power down before I remove the memory card?
Yes. Always power down the camera before removing the memory card. Removing the card while the camera is on can corrupt files or damage the card. Wait for the shutdown to complete, then open the card door and slide the card out.