The quickest way to power down your GoPro
Press and hold the power button for three seconds. On most GoPro models, this is the button on the top or side of the camera — the exact location depends on your model. The screen will go black, and the camera will shut down completely. That's it. No menu navigation needed.
If your GoPro is in standby mode (screen off but camera still drawing power), holding the power button for three seconds will also wake it up. A single quick press toggles between standby and full power-down, so make sure you hold it long enough to see the shutdown sequence.
Some newer models show a power-off animation or vibration to confirm the camera is shutting down. Older models straightforward go dark. Either way, once the screen is off and stays off for a few seconds, the camera is powered down.
Key Takeaways
- Hold the power button for three seconds to turn off your GoPro — a quick press only toggles standby mode.
- The power button location varies by model, but it is always on the top or side of the camera body.
- Standby mode keeps the camera drawing battery power, so full shutdown is better if you are not using it for several hours.
- If your camera is frozen or unresponsive, remove the battery for 30 seconds and reinsert it to force a restart.
Where the power button is on different GoPro models
On Hero 11, Hero 10, and Hero 9, the power button is on the top of the camera, toward the back. It is a small circular button that you press straight down.
On Hero 8 and earlier models, the power button is on the side of the camera, usually near the USB port. The exact position shifts slightly between generations, but it is always a small button you can reach without removing the camera from its housing.
If you are not sure which button is the power button, check the physical label on your camera or the quick-start guide that came in the box. The manual also shows a diagram of the button layout for your specific model.
Standby mode versus full shutdown
When you press the power button once, your GoPro enters standby mode. The screen turns off, but the camera is still powered on and ready to record when ready when you press the button again. Standby drains the battery slowly over time — typically 1 to 2 percent per hour depending on the model and what features are enabled.
Full shutdown, triggered by holding the power button for three seconds, cuts all power to the camera except the internal clock. The battery drain in full shutdown is negligible — your GoPro can sit powered off for weeks without losing charge.
Use standby if you are taking a short break and plan to record again within an hour or two. Use full shutdown if you are done for the day or storing the camera for longer than a few hours.
What to do if your GoPro won't turn off
If the power button is not responding or the camera is frozen, try holding the power button for 10 seconds instead of three. Some models require a longer hold to force a shutdown if the system is stuck.
If that does not work, remove the battery. Open the battery door on the bottom or side of your camera (depending on the model), slide the battery out, and wait 30 seconds. Reinsert the battery and press the power button. This forces a complete restart and usually clears any software freeze.
If the camera still will not respond after a restart, the battery itself may be drained or faulty. Charge the camera using the USB-C cable and power adapter for at least 30 minutes, then try again. A completely dead battery sometimes needs time on the charger before the camera will respond to any button press.
Extending battery life before you power down
Before you shut down your GoPro, turn off features you are not using. Go into the settings menu and disable GPS, voice control, and Wi-Fi if they are on. These drain the battery even when the camera is in standby.
If you are storing your camera for more than a week, power it down completely and remove the battery. Store the battery separately in a cool, dry place. This prevents the battery from slowly discharging and keeps it in better condition for your next shoot.
For cameras you use regularly, a full shutdown at the end of each day is the simplest habit. It takes three seconds and ensures your battery is ready for the next session.
Turning off your GoPro remotely with the app
If your GoPro is connected to the GoPro app on your phone via Wi-Fi, you can power it down from the app instead of walking over to the camera. Open the app, tap the settings icon, and look for a power or shutdown option. Not all models support remote shutdown, so check your app version and camera model if you do not see this option.
Remote shutdown is useful if your camera is mounted in a hard-to-reach spot, like on a helmet or a pole. However, the app connection must be active for this to work, so if your camera is already powered off or out of range, you will need to use the physical power button.
Frequently Asked Questions
Does turning off my GoPro damage the battery?
No. Powering down your camera does not harm the battery. In fact, full shutdown is better for battery health than leaving the camera in standby for long periods. Standby mode causes slow, continuous drain that can degrade the battery over time.
How long does it take to turn a GoPro back on after shutting it down?
Full startup takes about 2 to 4 seconds from the moment you press the power button. Standby mode wakes up almost when ready — usually under one second. If you need the camera ready quickly, standby is faster, but it costs battery power.
Can I turn off my GoPro while it is recording?
Yes, but the recording will stop when ready and the file will be saved. You will not lose the footage you already captured, but anything after you power down will not be recorded. If you want to stop recording without powering off, press the record button once instead.
What happens if I remove the battery without powering down first?
The camera shuts down when ready, just as if you had held the power button. No damage occurs, but any unsaved footage or settings changes may be lost. It is better to power down properly first, but removing the battery in an emergency will not break the camera.
Why does my GoPro turn back on by itself after I shut it down?
This usually happens if the power button is stuck or being pressed accidentally. Check that nothing is pressing the button — sometimes a tight case or protective cover can cause this. If the button feels stuck, gently clean around it with a dry cloth. If the problem continues, the button may need service.