The quickest way to power down your GoPro Hero 5

Press and hold the power button on the back of the camera for about three seconds until the screen goes black and you hear a beep. That's it — your Hero 5 is off. The power button is the small button on the rear of the camera, just above the USB port. You'll feel it click when you press it.

If the camera doesn't respond to the power button, it may be frozen. In that case, remove the battery for 30 seconds, then reinsert it and try the power button again. This forces a complete shutdown and usually clears any temporary glitches.

The Hero 5 will also power down automatically if you leave it idle for about five minutes without touching any buttons. This is a battery-saving feature, so if you step away from the camera, you don't have to manually turn it off every time.

Key Takeaways

  • Hold the power button on the back of the camera for three seconds until the screen goes dark and you hear a beep.
  • If the camera is frozen and won't respond to the power button, remove the battery for 30 seconds and reinsert it.
  • The Hero 5 automatically shuts down after about five minutes of no activity to preserve battery life.
  • A full power-down is different from sleep mode — sleep mode keeps the camera ready to record faster but uses more battery.

Understanding sleep mode versus full shutdown

Your Hero 5 has two low-power states: sleep mode and full shutdown. Sleep mode is what happens when the camera sits idle for a few minutes — the screen goes dark, but the camera is still drawing a small amount of power and can wake up when ready when you press a button. Full shutdown, which you trigger by holding the power button, cuts power almost completely.

If you're storing the camera for a few hours or taking a break during the day, sleep mode is fine and actually convenient because the camera wakes up faster. If you're putting the camera away for days or weeks, do a full shutdown to preserve battery charge. A fully powered-down Hero 5 will hold its charge much longer than one left in sleep mode.

What to do if the power button isn't working

If you hold the power button and nothing happens, the battery may be completely drained. Plug the camera into a USB charger using the cable that came with it, or use any standard micro-USB charger. Let it charge for at least 30 minutes before trying the power button again.

If the battery has charge but the button still doesn't respond, the camera may be frozen. Remove the battery by opening the battery door on the bottom of the camera, wait 30 seconds, and reinsert it. Then try the power button. If it still won't turn on, the power button itself may be damaged and you'll need to contact GoPro support or take the camera to a repair center.

Battery tips to extend your Hero 5's lifespan

Always do a full shutdown before storing the camera for more than a day. A camera left in sleep mode will slowly drain its battery even when you're not using it, and a completely dead battery can eventually lose its ability to hold a charge.

If you know you won't be using the camera for a week or longer, remove the battery entirely and store it separately in a cool, dry place. This is the best way to preserve battery health over time. When you're ready to use the camera again, reinsert the battery and power on normally.

Powering down before water activities

Always turn off your Hero 5 completely before putting it in the water or in a waterproof housing. A powered-down camera uses no battery and generates no heat, which is safer for the internal electronics when the camera is sealed. Wait until the screen is completely dark and you've heard the shutdown beep before submerging it.

After you finish recording in water, remove the camera from the housing and power it down again before opening it. This prevents condensation from forming inside the camera as it cools. Let the camera sit for a few minutes before opening the battery door.

Frequently Asked Questions

Does holding the power button longer than three seconds do anything different?

No. Three seconds is all you need to trigger the shutdown. Holding it longer won't speed up the process or change what happens — the camera will straightforward stay off.

Will my footage be lost if I force a shutdown by removing the battery?

No. Video and photos are saved to the memory card as soon as you stop recording, so removing the battery won't erase anything. However, if you remove the battery while the camera is actively recording or saving a file, you could corrupt that specific file.

Can I turn off the automatic shutdown feature?

The Hero 5 doesn't have a setting to disable automatic shutdown. If you want to keep the camera powered on longer, you'll need to press a button every few minutes to keep it awake, or connect it to an external power source.

Is it bad to leave the Hero 5 plugged in after it's fully charged?

Modern GoPro batteries have built-in protection that stops charging once the battery is full, so leaving it plugged in won't damage the battery. However, it's still a good habit to unplug it once charging is complete to save energy.