Press and hold the power button for three seconds
The power button on a GoPro Hero 5 is located on the top of the camera, toward the back. To turn the camera on, press and hold this button for about three seconds until you see the GoPro logo appear on the screen. You will also hear a startup sound and feel a small vibration.
The camera takes roughly five to ten seconds to fully boot up after you first press the button. During this time, the screen may show the GoPro logo or a loading animation. Wait until you see the main menu or live preview screen before you try to record or change settings.
If the camera does not turn on after holding the button for three seconds, the battery may be empty. Plug the camera into a USB charger using the included cable and wait at least 30 minutes before trying again.
Key Takeaways
- The power button sits on the top back of the Hero 5 and must be held down for three seconds to turn the camera on.
- The startup process takes five to ten seconds, and you should wait for the main menu to appear before recording.
- If the camera does not respond, the battery is likely empty and needs to be charged for at least 30 minutes.
- Once powered on, the Hero 5 is ready to record video, take photos, or adjust settings through the touchscreen menu.
- The camera will automatically shut down after a set idle time to preserve battery life, so you may need to power it on again if you leave it unused.
What happens after the camera powers on
Once the Hero 5 finishes starting up, you will see either the live preview screen or the main menu, depending on your last setting. The live preview shows what the camera's lens sees in real time, which is useful for framing your shot before you record. If you see the menu instead, you can swipe left or right to navigate between recording modes: Video, Photo, Burst, Time Lapse, and Slow Motion.
The touchscreen at the back of the camera is your main way to control what happens next. A single tap on the large red circle at the bottom of the screen starts recording. Tap it again to stop. If you want to change settings like resolution, frame rate, or white balance, tap the settings icon (usually a gear symbol) and scroll through the options.
Charging the battery if it is dead
If you press the power button and nothing happens, the battery is empty. The Hero 5 uses a rechargeable lithium battery that comes in the box. Plug the included USB-C cable into the port on the side of the camera, then connect the other end to a USB power adapter (a phone charger works fine) or a computer.
A dead battery typically needs 30 to 60 minutes to charge enough to turn the camera on. You will see a charging indicator on the screen once the camera has enough power. A full charge takes about two hours. While the camera is charging, you can leave it plugged in, but you cannot use it until the battery has at least a small amount of charge.
Why the camera might not turn on
The most common reason a Hero 5 will not power on is a completely drained battery. If you have charged it and it still will not respond, try a different USB cable or power adapter—sometimes the cable itself is faulty. Leave it plugged in for at least an hour before trying again.
Another possibility is that the camera is frozen. If the screen is completely black and unresponsive even after charging, hold the power button down for ten seconds. This forces a restart and often clears temporary glitches. Release the button and wait a few seconds, then press and hold it again for three seconds to turn the camera on normally.
If the camera still will not turn on after a restart and a full charge, the battery itself may be damaged. Batteries can fail if they are exposed to extreme cold, extreme heat, or water damage. In this case, you would need to replace the battery with a new one compatible with the Hero 5.
Auto-shutdown and battery saving
The Hero 5 automatically turns itself off after a period of inactivity to save battery power. The default time is usually five minutes, but you can change this in the settings menu. If your camera seems to have turned off on its own, it has likely hit this auto-shutdown timer.
To turn it back on, straightforward press and hold the power button again for three seconds. If you are using the camera in a situation where you do not want it to shut down automatically—such as during a long time-lapse or while recording a stationary scene—you can disable auto-shutdown in the settings. Look for an option labeled "Auto Off" or "Auto Shutdown" and set it to "Never."
Using the camera right after turning it on
Once the Hero 5 is fully powered on and you see the live preview or menu, you are ready to record. Tap the red record button to start capturing video when ready. The camera will record until you tap the button again or until the battery runs out or the memory card fills up.
If you want to switch recording modes before you start, swipe left or right on the screen to move between Video, Photo, Burst, Time Lapse, and Slow Motion. Each mode has its own settings. For example, in Video mode you can choose resolution and frame rate, while in Photo mode you can set the interval for burst shots. Take a moment to check these settings before you record, especially if you are using the camera for the first time or after a long break.
Frequently Asked Questions
How long does it take for the Hero 5 to turn on?
The startup process takes five to ten seconds from the moment you press the power button. You will see the GoPro logo first, then the main menu or live preview screen. The camera is ready to use once the screen is fully responsive.
Can I turn on the Hero 5 while it is charging?
Yes, you can turn on and use the Hero 5 while it is plugged in and charging. The camera will continue to charge even while you are recording or viewing footage. This is useful if you want to use the camera for an extended period without worrying about battery drain.
What does the vibration mean when I turn on the camera?
The vibration is a haptic feedback signal that tells you the power button press was registered. It happens at the same time as the startup sound and the GoPro logo appears on screen. If you feel the vibration but see no logo, wait a few more seconds for the screen to light up.
Why does my Hero 5 turn off by itself?
The camera has an auto-shutdown feature that turns it off after five minutes of inactivity to save battery. You can disable this in the settings menu by finding the "Auto Off" option and setting it to "Never," or you can choose a longer time interval like 15 or 30 minutes.
Is it normal for the screen to stay black for a few seconds after I press the power button?
Yes, this is normal. The Hero 5 needs a few seconds to boot up and light the screen. If the screen remains black for more than 15 seconds, the battery may be too low. Charge the camera and try again.