Press and hold the power button on the side of the camera

The power button on a GoPro Hero is a small circular button on the side of the camera body, usually near the bottom. Press and hold it for about three seconds until you see the GoPro logo appear on the screen and hear a startup sound. The camera will then boot up and display the home menu.

If the camera does not respond, the battery may be empty. Plug the camera into a USB charger using the cable that came in the box, wait 10 to 15 minutes, and try again. A completely drained battery sometimes needs a few minutes of charging before the camera will power on at all.

Key Takeaways

  • The power button is a small circular button on the side of the camera body; press and hold it for three seconds until the logo appears.
  • If nothing happens, the battery is likely empty and needs to be charged for 10 to 15 minutes before trying again.
  • Once powered on, the camera displays the home menu and is ready to record or adjust settings.
  • The camera will automatically shut down after 5 to 10 minutes of inactivity to preserve battery life.

What happens after the camera powers on

Once the startup sound plays and the logo disappears, the home menu appears on the screen. You will see icons for recording video, taking photos, and accessing settings. The camera is now ready to use. If you want to start recording when ready, press the shutter button (the larger button on top of the camera) to begin.

The screen will show you the current recording mode, battery level, and storage space remaining. If the battery icon shows red or very low, the camera may shut down during recording. Charge the battery before starting a long recording session.

Charging the battery if the camera won't turn on

If you press the power button and nothing happens, the battery is dead. Use the USB-C cable that came with your camera and plug it into a wall charger, computer, or portable power bank. The charging port is on the bottom or side of the camera, depending on your Hero model.

While charging, you may see a charging indicator light on the camera body (usually red or amber). Leave the camera plugged in for at least 30 minutes for a partial charge, or two to three hours for a full charge. Once the light turns green or stops blinking, the battery has enough power to turn on.

Auto-shutdown and battery conservation

GoPro Hero cameras automatically power off after 5 to 10 minutes if you are not using them. This is a built-in feature to save battery life. If your camera turned off on its own, straightforward press the power button again to wake it up.

To extend battery life during a day of shooting, turn off the screen when you are not actively framing shots. You can also lower the screen brightness in the settings menu. Removing the camera from its housing when you are not in water also reduces power drain from the protective lens.

Troubleshooting if the power button does not work

If you hold the power button for 10 seconds and the camera still does not respond, try a hard reset. Most GoPro Hero models have a small reset button on the back or side of the camera. Use a straightened paperclip or the reset tool (if included) to press and hold the reset button for 10 seconds. This clears temporary software issues and may restore power.

If the camera still will not turn on after a reset and a full charge, the power button itself may be stuck or damaged. Contact GoPro support or visit an authorized repair center. Do not attempt to disassemble the camera yourself, as this will void the warranty and may cause water damage if the camera is waterproof.

Different Hero models and button placement

Newer GoPro Hero models (Hero 11, Hero 12) have the power button on the left side of the camera when you are holding it to record. Older models (Hero 9, Hero 10) have the button in a slightly different location on the side. Check your camera's manual or the GoPro website if you are unsure where the button is on your specific model.

The startup process is the same across all Hero models: press and hold the power button until the logo appears. If you have lost your manual, you can read a PDF from the GoPro support website by entering your camera model number.

Frequently Asked Questions

How long does it take for the camera to fully power on?

The GoPro Hero usually powers on within 3 to 5 seconds of pressing the button. You will see the GoPro logo appear first, followed by the home menu. If it takes longer than 10 seconds, release the button and try again.

Can I turn on the camera while it is charging?

Yes. You can power on the camera while it is plugged into a charger. The camera will operate normally and charge at the same time. This is useful if you want to review footage or adjust settings while the battery replenishes.

Why does my camera turn off by itself?

GoPro Hero cameras have an automatic shutdown feature that powers them off after 5 to 10 minutes of inactivity to save battery. This is normal behavior. Press the power button again to turn the camera back on whenever you are ready to use it.

What if the power button is stuck or unresponsive?

Try pressing the button firmly but do not force it. If it remains stuck, do not disassemble the camera. Contact GoPro support or an authorized repair center. Forcing a stuck button can damage the internal power switch and void your warranty.