The quickest way to power down your GoPro

Press and hold the power button for three seconds until the screen goes black and you hear a beep or see a power-down animation. The power button is on the top or side of your camera depending on the model — on most recent GoPros it's the button with a circular power symbol. Release it once the camera shuts down completely.

If your GoPro is in standby mode (screen dark but camera still drawing power), a three-second press will wake it. If it's already on and recording, the same three-second hold will stop recording and shut the camera off in one action.

Some older GoPro models use a two-second press instead of three seconds. If three seconds doesn't work, try holding for two seconds and watch for the shutdown signal on your screen.

Key Takeaways

  • Hold the power button for three seconds until the screen goes black and you hear a beep or power-down sound.
  • The power button location varies by model — check the top or side of your camera for the circular power symbol.
  • Pressing the power button stops recording and powers down the camera at the same time.
  • Standby mode still drains battery slowly, so a full shutdown is better if you won't use the camera for hours.
  • If the camera is frozen or unresponsive, remove the battery for 30 seconds and reinsert it to force a restart.

Standby mode versus full shutdown

Your GoPro has two low-power states. Standby mode turns off the screen and stops recording but leaves the camera ready to wake when ready when you press the power button again. Full shutdown powers down completely and takes a few seconds to start up the next time.

Standby drains your battery slowly — over hours or days if the camera sits unused. Full shutdown uses almost no power. If you're taking a break between shots and will be back in minutes, standby is fine. If you're done for the day or packing the camera away, shut it down completely to preserve battery life.

To enter standby without fully shutting down, press the power button once (not held). The screen will turn off but the camera stays powered. Press it again to wake the screen.

What to do if your GoPro won't turn off

If the power button doesn't respond or the camera stays on even after holding the button, the camera may be frozen. Remove the battery by opening the battery door on the bottom or back of the camera — the location depends on your model. Wait 30 seconds, then reinsert the battery and close the door. This forces a complete restart and usually clears the freeze.

If the camera still won't respond after a restart, plug it into a USB charger and let it charge for at least 15 minutes. A completely drained battery can make the camera unresponsive. Once it has some charge, try the power button again.

If the camera is still stuck, contact GoPro support with your model number and a description of what happened. They can walk you through additional troubleshooting or discuss repair options if the hardware is damaged.

Battery drain and power management

Your GoPro battery drains faster when the camera is on — whether recording or in standby. Recording drains it fastest because the sensor, processor, and screen are all active. Standby uses much less power but still more than a fully powered-down camera.

If you want to preserve battery between uses, full shutdown is the best choice. Some models also have a low-power mode in the settings menu that reduces screen brightness and limits features to stretch battery life during a long day of shooting. Check your camera's settings menu to see if this option is available.

Always power down your camera before storing it for more than a few days. Even in standby, a battery left powered will slowly discharge and can eventually drop to zero, which can damage the battery itself.

Powering down before removing the battery or memory card

Always shut down your GoPro completely before removing the battery or memory card. If you pull the battery while the camera is on or in standby, you risk corrupting files on the memory card or losing footage you just recorded. A full shutdown ensures all data is written to the card safely.

After you power down, wait a few seconds before opening the battery door or memory card slot. This gives the camera time to finish any background processes. Then remove the battery or card as needed.

If you accidentally removed the battery while the camera was on, don't panic — most of the time your footage is still intact. Reinsert the battery, power on the camera, and check your files. If a file is corrupted, it usually shows as unplayable or won't import, but the rest of your footage should be fine.

Turning off Wi-Fi and Bluetooth to save power

Your GoPro uses Wi-Fi and Bluetooth to connect to your phone or remote control. Both features drain battery even when you're not actively using them. If you don't need remote control or live preview during a shoot, turn off Wi-Fi and Bluetooth in the camera's settings menu to extend battery life.

To disable these features, open the settings menu, look for "Connections" or "Wireless," and toggle Wi-Fi and Bluetooth off. The camera will still record normally and you'll still be able to transfer files to your phone later by turning the connection back on.

Disabling wireless features won't shut down your camera — it just stops it from broadcasting a signal. You still need to press and hold the power button to power down the camera itself.

Frequently Asked Questions

How long does it take for a GoPro to fully shut down?

Once you release the power button after the three-second hold, the camera shuts down in one to two seconds. You'll see the screen go black and hear a beep or see a brief animation. After that, the camera is completely off and drawing no power.

Can I turn off my GoPro while it's recording?

Yes. Holding the power button for three seconds stops the recording and powers down the camera at the same time. The footage you recorded before pressing the button will be saved to the memory card.

Does my GoPro use battery power in standby mode?

Yes, standby mode uses a small amount of battery power. If you won't use the camera for several hours or more, fully shut it down instead. A fully powered-down camera uses almost no battery and is better for long-term storage.

What's the difference between my GoPro not turning on and it being in standby?

If the screen is completely dark and you press the power button and nothing happens, the battery may be dead. Plug the camera into a USB charger for 15 minutes and try again. If the screen was dark but the camera woke up when you pressed the button, it was in standby, not fully off.

Is it bad to leave my GoPro plugged in after it's fully charged?

Most modern GoPros have smart charging that stops charging once the battery is full, so leaving it plugged in overnight occasionally won't damage the battery. However, for long-term storage, unplug the camera once it's charged. Batteries last longer when they're not constantly powered.