The fastest way to power down your GoPro
Press and hold the power button on the back of your camera for three seconds. The screen will go black, and the status light on the front will turn off. That's it — your GoPro is now powered down.
The power button location varies slightly by model. On Hero 11, Hero 10, and Hero 9, it's the button on the back left side. On older models like the Hero 8 and Hero 7, it's in the same spot. If you're using a GoPro Max, the power button is also on the back, slightly to the left of center.
You don't need to hold it longer than three seconds. Holding it for five or ten seconds won't hurt the camera, but three seconds is all that's required to trigger the shutdown sequence.
Key Takeaways
- Hold the power button on the back of your GoPro for three seconds to turn it off completely.
- The camera will display a shutdown animation on the screen before the display goes dark.
- The status light on the front of the camera will turn off once the shutdown is complete.
- You can also enable auto-off in the settings menu to have your GoPro shut down automatically after a set period of inactivity.
What happens during shutdown
When you hold the power button, your GoPro doesn't cut power when ready. Instead, it runs a shutdown sequence that takes about two seconds. During this time, you'll see a power-down animation on the screen — usually a logo or icon that fades out. This sequence lets the camera save any unsaved data and close files properly.
Once the animation finishes, the screen goes completely black and the status light (the small LED on the front) turns off. At this point, the camera is fully powered down and drawing almost no battery power. The only exception is if you have a removable battery — even when powered off, a GoPro with a battery installed will draw a tiny amount of power over time, so removing the battery is the only way to stop all drain.
Using auto-off to save battery
If you forget to turn off your GoPro manually, you can set it to shut down on its own. Go to Preferences in the settings menu, then select Auto Off. You'll see options for 5 minutes, 15 minutes, 30 minutes, or never.
Auto-off is useful if you're out filming and don't want to drain the battery while the camera sits idle. If you choose 5 minutes, the camera will power down five minutes after you stop using it — no button press needed. This setting applies whether the camera is in your bag, on a tripod, or in your hand.
Keep in mind that auto-off only triggers when the camera detects no activity. If you're recording or actively using the camera, the timer resets. Once you stop recording and the timer runs out, the camera powers down automatically.
Turning off without using the power button
If your power button is stuck or not responding, you can also power down your GoPro by removing the battery. Open the battery door on the side or bottom of the camera (depending on your model) and slide the battery out. The camera will shut down when ready.
This method is not ideal for regular use because it doesn't let the camera run its normal shutdown sequence, but it works in a pinch. After you remove the battery, wait a few seconds before reinserting it to make sure the camera has fully powered down.
Difference between power-off and sleep mode
Some GoPro models have a sleep mode separate from full power-off, though newer models have largely moved away from this feature. If your camera has a sleep option, it will appear in the settings menu. Sleep mode uses less power than being fully on but more power than being completely off.
For most users, full power-off (using the three-second button hold) is the better choice because it stops almost all battery drain. Sleep mode is rarely necessary on modern GoPros, and turning the camera completely off is simpler and more effective.
What to do if your GoPro won't turn off
If holding the power button for three seconds doesn't work, try holding it for longer — up to ten seconds. Sometimes the button needs a firmer press or a longer hold to register, especially if the camera has been in use for a long time or exposed to dust.
If the button still doesn't respond, remove the battery as described above. Once the battery is out, leave it out for 30 seconds, then reinsert it and try the power button again. This can reset the camera's power management system and restore normal shutdown behavior.
If the camera still won't power off, the power button itself may be damaged or the internal power management circuit may have failed. Contact GoPro support with your model number and a description of what's happening — they can advise whether repair or replacement is the best option.
Frequently Asked Questions
Does turning off my GoPro damage the battery?
No. Turning off your camera is actually better for the battery than leaving it on. Powering down stops the battery from draining, which extends its overall lifespan. Modern GoPro batteries are designed to handle frequent power cycles without damage.
How long does it take for the battery to fully drain if I leave the camera on?
A fully charged GoPro battery typically lasts one to two hours of continuous recording, depending on resolution and frame rate. If you leave the camera on without recording, the battery will drain more slowly — usually over several hours — but it will still drain. Turning the camera off is the only way to stop battery drain completely.
Can I turn off my GoPro while it's recording?
You can press the power button while recording, but the camera will not shut down. Instead, it will stop the recording and then power off. Your footage will be saved before the shutdown happens, so you won't lose video.
What if my GoPro is mounted on a helmet or pole — how do I turn it off?
You can still reach the power button even when the camera is mounted. The button is on the back of the camera, so you can press it from behind or from the side depending on how the mount is oriented. If the mount makes the button hard to reach, you can use the GoPro app on your phone to power off the camera remotely.
Is it safe to leave my GoPro plugged in overnight?
Yes. Modern GoPro batteries have overcharge protection, so leaving the camera plugged in won't damage the battery. However, turning the camera off before plugging it in is a good habit because it reduces heat buildup during charging.