The quickest way to power down your Hero 5

Press and hold the power button on the back of the camera for three seconds. The screen will go black, and the camera will shut down completely. The power button is the small button on the rear panel, just above the battery door. You will feel it click as you hold it.

If the camera is in standby mode (screen dark but not fully off), a three-second press will power it down. If it is actively recording or in use, the same three-second hold works — the camera will stop whatever it is doing and turn off.

Key Takeaways

  • Hold the power button on the back of the camera for three seconds to turn it off completely.
  • The camera will shut down whether it is recording, in standby, or idle — the three-second hold works in all states.
  • A short press of the power button turns the camera on or cycles through display modes, so make sure you hold it long enough to power down.
  • If the camera feels warm after use, let it cool for a few minutes before storing it to extend battery life.

Why you should power down instead of leaving it in standby

Standby mode drains the battery slowly over time. If you leave the Hero 5 in standby for a week, you may return to find the battery partially or fully depleted. Powering it off completely stops all power draw except for the internal clock.

Powering down is also the safest way to prepare the camera for storage. If you plan to leave the Hero 5 unused for more than a few days, turning it off and removing the battery extends the lifespan of both the battery and the camera's internal components.

What happens if you just remove the battery

Removing the battery will shut down the camera when ready, but it is not the recommended method. The Hero 5 may not save the last few seconds of video or photo data if you pull the battery without powering down first. You risk losing footage or corrupting files on the memory card.

Use the power button instead. It gives the camera time to write any pending data to the memory card before shutting down. Battery removal should be reserved for situations where the camera is frozen or unresponsive.

Restarting after a full shutdown

To turn the camera back on, press the power button once. The Hero 5 will boot up in about two seconds. The screen will light up, and you will see the GoPro logo briefly before the main menu appears.

If the camera does not respond to a single power button press, hold the button for three seconds again. This forces a restart. If it still does not turn on, the battery may be completely drained — plug the camera into a USB charger and wait at least 30 minutes before trying again.

Turning off the camera while it is mounted

You can power down the Hero 5 while it is mounted to a helmet, chest strap, or pole. The power button remains accessible on the back of the camera even with most standard mounts. Reach around and press it for three seconds as you normally would.

If your mount completely covers the back of the camera, you will need to remove it to access the power button. Some third-party mounts include a cutout for the power button — check your mount's design before assuming you need to remove the camera.

Troubleshooting a camera that won't turn off

If the Hero 5 does not respond to the power button, the camera may be frozen. Hold the power button for ten seconds instead of three. This forces a hard restart and will shut down the camera even if it is stuck on a menu or frozen during recording.

If the camera still does not turn off, remove the battery for 30 seconds, then reinsert it. This clears the camera's memory and forces a complete reset. After reinserting the battery, press the power button once to turn it back on. The camera should respond normally after this reset.

Frequently Asked Questions

Does the Hero 5 turn off automatically if I don't use it?

No. The Hero 5 does not have an automatic shutdown feature. If you leave it powered on or in standby, it will remain in that state until you manually turn it off. You must press the power button to shut it down.

Will turning off the camera erase my videos or photos?

No. Powering down the camera does not erase any footage or photos. All files stored on the memory card remain intact. The camera straightforward stops running and uses no power while it is off.

How long does it take to turn off a Hero 5?

The camera shuts down when ready after you release the power button. The screen goes black within one second. The camera is fully powered down and ready to store or transport right away.

Can I turn off the camera while it is charging?

Yes. You can press the power button to turn off the camera while it is plugged into a charger. The camera will power down, but the battery will continue charging. This is safe and does not damage the camera or battery.

What if the power button is stuck or broken?

If the power button does not click or feels stuck, do not force it. Contact GoPro support or visit an authorized repair center. Forcing a stuck button can cause internal damage. In the meantime, you can remove the battery to power down the camera.