The quickest way to power down your GoPro

Press and hold the power button on the side or top of your camera for three seconds until the screen goes black and you hear a beep or see a power-off animation. The button location depends on your model — on Hero 11 and Hero 10, it's on the left side; on older models like the Hero 9, it's on the top. The camera is fully off when the LED indicator light stops blinking.

If your GoPro is in sleep mode instead of fully powered down, a single press of the power button will wake it. To avoid accidentally turning it back on while it's in your bag, make sure you hold the button long enough to hear the confirmation sound or see the shutdown screen.

Some newer models show a power-off menu on the screen asking you to confirm. Tap the checkmark or press the power button again to complete the shutdown. If you see this menu and do nothing, the camera will time out and turn off automatically after about 30 seconds.

Key Takeaways

  • Hold the power button for three seconds — a single press only wakes the camera or enters sleep mode.
  • The power button location varies by model: check the left side on Hero 11 and Hero 10, or the top on Hero 9 and earlier.
  • Wait for the LED light to stop blinking or listen for a beep to confirm the camera is fully off, not just in sleep mode.
  • If a confirmation menu appears on screen, tap the checkmark or press the power button again to finish shutting down.
  • Sleep mode uses less battery than being fully powered on, but only a full shutdown stops all power drain.

Sleep mode versus full shutdown

Your GoPro has two low-power states: sleep mode and full shutdown. Sleep mode keeps the camera ready to record quickly — it wakes with a single button press — but still drains the battery slowly over hours or days. Full shutdown cuts all power except what's needed to keep the date and time, so the battery stays charged much longer.

Use sleep mode if you plan to record again within a few hours. Use full shutdown if you're storing the camera for days or weeks. If your battery is already low, full shutdown prevents it from draining completely, which can damage the battery over time.

To enter sleep mode without fully powering off, press the power button once. The screen will dim or go dark, but the LED light will continue to blink slowly. Press the power button again to wake it when ready.

What to do if the power button is stuck or unresponsive

If the power button doesn't respond, try a force restart. Connect your camera to a USB charger and let it charge for at least 15 minutes, then press and hold the power button for five seconds. This clears temporary software glitches that sometimes freeze the button.

If the button still doesn't work after charging, remove the battery if your model allows it. Wait 30 seconds, then reinsert the battery and try powering on normally. This resets the camera's power circuit without erasing your footage or settings.

For cameras with non-removable batteries, connect to a computer via USB and check the GoPro app or desktop software for a factory reset option. A full reset will erase all settings but may restore button function. As a last resort, contact GoPro support with your model number and purchase date.

Turning off your GoPro while it's recording

If you press the power button while the camera is actively recording, the camera will stop recording first, save the file, and then shut down. This takes a few seconds — you'll see the recording stop icon appear, then the shutdown animation. Do not remove the battery or unplug the USB cable during this process, as it can corrupt the video file.

If you need to stop recording without shutting down the camera, press the shutter button (usually the top button) instead. This ends the current clip and returns the camera to standby mode, ready to record again without powering off.

Powering off when the camera is mounted or in a housing

The power button remains accessible even when your GoPro is mounted on a helmet, chest strap, or other accessory. You do not need to remove the camera to turn it off — straightforward reach the button and hold it for three seconds as usual.

If your camera is inside a waterproof housing, the power button may be harder to reach but should still be pressable through the housing material. Press firmly and hold for the full three seconds. If the button feels stuck or unresponsive through the housing, remove the camera and try again to confirm the button itself is working.

For cameras in underwater housings, power off before opening the housing to prevent water from entering while the camera is still warm and condensation is forming inside.

Battery drain and storage after shutdown

A fully powered-off GoPro loses about 1 to 2 percent of its battery charge per month when sitting unused. This is normal and does not indicate a problem. If you're storing your camera for several months, you can extend battery life by removing the battery entirely and storing it separately in a cool, dry place.

Before long-term storage, charge the battery to about 50 percent rather than leaving it fully charged or completely empty. Both extremes can reduce the battery's lifespan. Store the battery in a plastic case or bag to prevent it from touching metal objects that could cause a short circuit.

When you're ready to use the camera again, insert the battery and charge it fully before recording. If the battery has been stored for more than six months, it may take longer to charge the first time.

Frequently Asked Questions

Does turning off my GoPro save the video I just recorded?

Yes. The camera automatically saves the video file to the memory card before shutting down, even if you power off when ready after recording stops. You do not need to wait or perform any extra steps — the file is safe as soon as the recording indicator disappears.

Can I turn off my GoPro while it's charging?

Yes, you can press the power button to shut down the camera while it's plugged into a charger. The charger will continue to charge the battery even after the camera is off. The LED light may blink or stay solid depending on your model, but this is normal.

What's the difference between holding the power button for 3 seconds versus 1 second?

A single press wakes the camera from sleep mode or enters sleep mode if the camera is on. Holding for three seconds triggers a full shutdown. If you're unsure whether the camera is responding, hold the button longer — holding it for five or six seconds will not damage anything and guarantees a shutdown.

Why does my GoPro turn back on by itself after I shut it down?

This usually happens if the power button is being pressed accidentally in your bag or by the camera strap. Check that nothing is pushing against the button. If it continues, the button may be stuck or damaged and should be inspected by GoPro support.

Is it bad to leave my GoPro on all the time?

Leaving it powered on drains the battery completely in 1 to 3 hours depending on the model and whether the screen is on. This is wasteful and can damage the battery if it fully drains repeatedly. Power off when you're not recording to preserve battery health and extend the time between charges.