The quickest way to power down your GoPro Hero

Press and hold the power button on the top of the camera for about three seconds until the screen goes black and you hear a beep or see the LED lights turn off. That's it — your camera is now powered down. The power button is the only button you need to touch to shut the camera off completely.

If your camera is in sleep mode (screen dark but still drawing a tiny bit of power), holding the power button will wake it first, then turn it off on the second press. Don't worry if this happens — just hold the button again for three seconds and it will fully shut down.

Key Takeaways

  • Hold the power button on top of the camera for three seconds to turn it off completely.
  • You'll know it worked when the screen goes black, the beep sounds, and the LED indicators turn off.
  • Sleep mode is different from power-off — the camera still uses battery in sleep mode, so fully power down if you won't use it for a while.
  • Removing the battery is the only way to may provide zero power draw, useful before long storage.

Understanding sleep mode versus power-off

Your GoPro Hero has two low-power states, and they work differently. Sleep mode turns off the screen and stops recording, but the camera stays connected to your phone app and keeps a small amount of power flowing. Power-off shuts down everything — the screen, the wireless radio, and all background processes.

Sleep mode is useful if you're taking a break between shots and want to wake the camera quickly by pressing the power button once. Power-off is what you want before putting the camera away for days or weeks, because it stops the battery from draining slowly in your bag. A camera in sleep mode can lose 5 to 10 percent of its battery charge per day, even when you're not using it.

Why your GoPro might not turn off

If you hold the power button and nothing happens, the battery is likely completely dead. Plug the camera into a USB charger using the cable that came with it, wait 10 to 15 minutes, then try the power button again. A fully drained battery sometimes needs a few minutes of charge before the camera will respond.

If the camera powers on but won't power off, try a force restart: hold the power button for 10 seconds without letting go, even if the screen comes on. This forces the camera to shut down and clear any stuck processes. After the restart, the camera should respond normally to the three-second power-off press.

Turning off wireless and GPS to save battery before shutdown

Before you power down, you can disable features that drain the battery during storage. Open the camera's settings menu, find Wireless or Connectivity, and turn off Bluetooth and Wi-Fi. If your model has GPS, turn that off too. These steps don't affect the power-off process itself, but they reduce the tiny amount of power the camera draws while sitting in a bag.

You don't have to do this every time — it's mainly useful if you're storing the camera for more than a week. When you power the camera back on, these settings will still be off, so you'll need to turn them back on if you want to use the app or GPS features again.

Removing the battery for complete power isolation

If you're storing your GoPro for a month or longer, removing the battery is the safest way to prevent any power drain. Open the battery door on the bottom or side of the camera (depending on your model), slide the battery out, and store it separately in a cool, dry place. The camera will not power on at all without the battery, and the battery won't lose charge sitting in a drawer.

Before you reinstall the battery after storage, check that the camera's power button responds when you press it — sometimes a long shutdown can cause a minor glitch. If the camera doesn't power on after you reinsert the battery, hold the power button for 10 seconds to force a restart.

What happens to your footage when you power off

Turning off the camera does not delete any video or photos. All your footage stays on the memory card, and the camera will find it again the next time you power on. The power-off process straightforward stops all active recording and closes down the operating system cleanly.

If you're worried about losing unsaved footage, don't be — GoPro cameras save video to the memory card continuously as they record, not all at once when you stop. Powering off mid-recording will not corrupt the file, though the last few seconds before shutdown might not be saved.

Frequently Asked Questions

Does holding the power button longer than three seconds hurt the camera?

No. Holding it for 5 or 10 seconds will just keep the camera off — it won't damage anything. The three-second guideline is just how long it takes for the shutdown command to register. If you're not sure it worked, holding the button longer won't cause a problem.

Can I turn off the camera while it's recording?

Yes, but the last few seconds of video before shutdown may not save. If you want to stop recording cleanly, press the record button to stop first, then hold the power button. This gives the camera time to finish writing the file to the memory card.

Why does my camera turn back on by itself after I power it off?

This usually happens if the power button is stuck or if something is pressing it in your bag. Check that the button moves freely and isn't jammed. If it keeps happening, try the force restart (hold for 10 seconds) to clear any stuck processes, then power off again.

Is it bad to leave my GoPro powered off for months?

No, but if you remove the battery before long storage, the camera will stay in perfect condition. A powered-off camera with the battery still inside will lose a small amount of charge over time, but this won't damage the battery or the camera.