The Power Button Is Your Main Switch
To turn off your GoPro Hero 5 Black, press and hold the power button on the top of the camera for about three seconds until the screen goes dark and the LED indicator light turns off. The power button is the only physical button on top of the camera — you cannot miss it. When you hold it down, you will see the camera shut down; this is the standard way to power down the device.
The camera will not turn off if you press the button quickly. A short tap will only wake the camera or switch between modes. You must hold the button down steadily for the full three seconds to trigger the shutdown sequence. If the camera is in the middle of recording or saving a file, it may take a moment longer to complete that task before powering down completely.
Key Takeaways
- Hold the power button on top of the camera for three seconds until the screen goes black and the LED light turns off.
- A quick tap of the power button will not shut down the camera — you must hold it down for the full duration.
- If the camera is recording or saving, wait for it to finish before the power-down completes.
- The camera will enter sleep mode after 5 to 10 minutes of inactivity if you do not manually power it off, which drains the battery more slowly than leaving it fully on.
What Happens When You Hold the Power Button
When you press and hold the power button, the camera begins a shutdown sequence. The touchscreen display will fade to black, and the front LED indicator — the small light on the front of the camera — will turn off. You may hear a brief sound or see a quick flash as the camera saves any remaining data and closes all active processes.
Do not remove the battery or memory card while the camera is shutting down. Wait until the LED is completely off and the screen is dark before you do anything else. If you interrupt the shutdown by removing the battery too early, you risk corrupting files or losing footage that was still being saved.
Sleep Mode vs. Full Power-Down
Your GoPro Hero 5 Black has two low-power states: sleep mode and full shutdown. Sleep mode activates automatically after 5 to 10 minutes of inactivity — the screen goes dark, but the camera is still drawing a small amount of power and can wake up quickly when you press any button. Full shutdown, which you trigger by holding the power button, cuts power almost entirely and drains the battery much more slowly.
If you plan to store the camera for more than a few hours, use the full shutdown method. Sleep mode is useful if you are taking a short break and want to resume recording without waiting for the camera to boot up again. The battery will last weeks in full shutdown mode but only days in sleep mode if the camera sits unused.
Turning Off the Camera While Recording
If the camera is actively recording when you press the power button, the Hero 5 Black will finish saving the current video file before it shuts down. This process usually takes a few seconds. You will see the recording indicator light stop blinking, and then the camera will power down. Do not force the shutdown by removing the battery — let the camera complete its save cycle.
If you want to stop recording without powering down the camera, press the shutter button (the large button on the front) instead. This will end the current recording and return the camera to standby mode, ready for the next shot. The power button is specifically for shutting down the entire device.
Battery Considerations When Powering Down
Turning off the camera is the best way to preserve battery life if you are not using it. A fully charged battery will hold its charge for weeks when the camera is powered off, but it will drain noticeably faster if the camera is in sleep mode or left on. If you are traveling or storing the camera between uses, power it down completely.
If the battery is very low and the camera shuts down on its own, do not be alarmed — this is a safety feature to prevent data loss. Charge the battery as soon as you can. Repeatedly draining the battery to zero can shorten its lifespan over time, so try to recharge before the camera powers down automatically.
Troubleshooting: Camera Won't Turn Off
If you hold the power button for three seconds and the camera does not shut down, the device may be frozen or unresponsive. Try holding the power button for a full 10 seconds — this will force a hard shutdown even if the camera is not responding normally. The screen should go dark and the LED should turn off.
If the camera still will not power down after a 10-second hold, the battery may be completely drained. Connect the camera to a charger using the USB cable and let it charge for at least 15 minutes, then try the power button again. If the camera remains unresponsive after charging, there may be a hardware issue, and you should contact GoPro support or consult the full user manual for your specific model.
Frequently Asked Questions
How long does it take the GoPro Hero 5 Black to power down?
The shutdown process takes about three to five seconds from the moment you release the power button. The screen will go dark almost when ready, but the camera may take a few more seconds to complete its internal shutdown sequence. Wait until the LED light is completely off before you remove the battery or memory card.
Will the camera turn off if I just close the battery door?
No. Closing the battery door will not power down the camera. You must use the power button. The battery door is only for accessing the battery and memory card. If you close the door while the camera is on, it will continue to run and drain the battery.
Can I turn off the camera using the touchscreen?
No. The GoPro Hero 5 Black does not have a power-off option in the touchscreen menu. The only way to shut down the camera is to hold the physical power button on top of the device. The menu allows you to change settings and modes, but not to power down.
What if the camera is in a protective case — can I still reach the power button?
Most protective cases for the Hero 5 Black have a cutout or opening that allows you to access the power button. If your case does not, you will need to remove the camera from the case to power it down. Check the case instructions to see if there is a designated button access point.
Does the camera need to be turned off before I remove the battery?
Yes. Always power down the camera using the power button before you remove the battery. Removing the battery while the camera is on or in sleep mode can corrupt files or cause data loss. Wait until the LED is off and the screen is dark, then you can safely remove the battery.