Press and hold the power button for three seconds
The power button is on the top of your GoPro, toward the back. Press it down and keep your finger there for about three seconds. You will feel a small vibration, and the screen will light up. That vibration and the light mean the camera is on.
If your GoPro has been off for a while, the startup takes a few seconds longer than usual. The camera boots up, checks its battery, and connects to any paired devices like your phone or remote. During this time, the screen may show the GoPro logo or a loading animation.
Once the camera is fully on, you will see the main menu or the live preview screen, depending on your model and settings. The screen will show battery level in the top corner, usually as a percentage or a battery icon. The camera is now ready to record video, take photos, or adjust settings.
Key Takeaways
- The power button sits on top of the camera toward the back and requires a three-second press to turn the camera on.
- You will feel a vibration and see the screen light up when the camera powers on successfully.
- Startup takes longer if the battery has been fully drained, so charge the camera before long trips.
- Once on, the camera shows battery level and is ready to record or take photos.
- A single quick press of the power button turns the camera off, while holding it for three seconds only works when the camera is already off.
What happens if the camera does not turn on
If you press the power button and nothing happens, the battery is likely empty. Plug the camera into a USB charger using the cable that came in the box. Most GoPro models charge fully in two to three hours. While charging, you may see a red light on the camera or a charging icon on the screen.
If the camera still does not respond after charging for 30 minutes, try a hard reset. Hold the power button down for 10 seconds instead of three. This forces the camera to restart completely and can fix minor software glitches. After the reset, the camera should power on normally.
If the camera remains unresponsive after a hard reset and a full charge, the power button itself may be stuck or damaged. Try pressing it from different angles or with slightly more pressure. If it still does not work, the camera may need service or repair.
Turning on the camera with a remote or your phone
If you have a GoPro remote or the GoPro app on your phone, you can turn the camera on without touching it. Open the app or press the power button on the remote. The camera will power on and connect to the remote or phone within a few seconds.
This feature is useful when the camera is mounted in a hard-to-reach spot, like on a helmet or a pole. The remote and phone both use wireless signals to communicate with the camera, so they need to be within about 100 feet for the connection to work reliably. Make sure the camera has at least some battery power left, because it needs power to receive the wireless signal.
Battery level and power-saving mode
When your GoPro is on, check the battery percentage on the screen. If it drops below 20 percent, the camera may enter a low-power mode automatically. In this mode, some features like Wi-Fi or the screen brightness may turn off to save battery life.
If the battery reaches 5 percent or lower, the camera will shut down on its own to protect the battery. This prevents damage to the internal cells and means you will not lose footage that is already recorded. Charge the camera as soon as you can after this happens to keep the battery healthy over time.
Turning off the camera properly
To turn off your GoPro, press the power button once. The screen will go dark, and the camera will shut down. This takes about one second. Do not hold the button down — a single quick press is all you need.
If you hold the power button for three seconds while the camera is already on, it will not turn off. Instead, it will do nothing or show a menu option depending on your model. A single press is the correct way to power down. If you want to turn the camera back on, you will need to press and hold the button for three seconds again.
Frequently Asked Questions
Why does my GoPro take so long to turn on?
If the battery was completely drained, the camera needs time to boot up and check its systems. This can take 10 to 15 seconds. If startup is always slow even with a full battery, try a hard reset by holding the power button for 10 seconds.
Can I turn on my GoPro while it is charging?
Yes. You can power on the camera while it is plugged into a charger. The camera will turn on normally and you can use it, though recording while charging may slow down the charging speed slightly.
What does the vibration mean when I turn on my GoPro?
The vibration is a confirmation that the power button press registered. It tells you the camera received the command and is starting up. If you do not feel a vibration, the button may not have been pressed hard enough or the battery may be too low.
Is there a way to turn on my GoPro without using the power button?
Yes, if you have the GoPro app or a GoPro remote paired to your camera, you can power it on remotely. The remote or app sends a wireless signal to wake the camera. This only works if the camera has enough battery power to receive the signal.
How long does a full battery last once the camera is on?
Battery life depends on what you are doing. Recording video drains the battery faster than taking photos or sitting idle. Most GoPro models record for two to four hours on a full charge, though using Wi-Fi or the screen continuously will reduce that time.