Press and hold the power button on the back of the camera

The power button on a GoPro Hero 5 is a small circular button on the back of the camera, just above the battery door. Press and hold it for about three seconds until you see the GoPro logo appear on the screen and hear a startup sound. The camera will then display the home menu.

If the camera does not respond, the battery may be empty. Plug the camera into a USB charger using the included cable and wait at least 30 minutes before trying again. A completely drained battery sometimes needs time to accept a charge before the camera will power on.

Key Takeaways

  • The power button is located on the back of the Hero 5, just above the battery door, and requires a three-second press to turn on the camera.
  • The camera will display the GoPro logo and play a startup sound when powered on successfully.
  • If the camera does not turn on, charge the battery for at least 30 minutes using the USB cable before trying again.
  • The Hero 5 will automatically shut down after five minutes of inactivity to preserve battery life unless you change this setting in the menu.

What happens after the camera powers on

Once the Hero 5 starts, the screen will show the main menu with options like Video, Photo, Burst, and Time Lapse. The camera is now ready to record or take pictures. If you want to start recording when ready, press the red record button on the top of the camera.

The first time you power on a new Hero 5, you may see a setup screen asking you to select language and connect to Wi-Fi. You can skip these steps by pressing the back button if you want to start using the camera right away. You can configure these settings later through the menu.

Turning the camera back off

To turn off the Hero 5, press and hold the power button again for three seconds. The screen will go black and the camera will shut down. This is the proper way to power down the camera and helps preserve battery life.

The Hero 5 also has an automatic shutdown feature. If the camera sits idle for five minutes without recording or taking photos, it will turn itself off. You can change this timeout setting in the Preferences menu if you want the camera to stay on longer or turn off faster.

Battery considerations before powering on

The Hero 5 uses a rechargeable lithium battery that comes partially charged from the factory. Before your first use, charge the battery fully using the USB cable and a power adapter. A full charge takes roughly two hours and gives you about 60 to 90 minutes of recording time, depending on resolution and frame rate.

Cold temperatures drain the battery faster. If you are filming in freezing conditions, the camera may shut down even though the battery shows charge remaining. Keeping the camera warm in a bag or pocket between shots helps extend battery life in cold weather.

What to do if the power button does not work

If you press the power button and nothing happens, first check that the battery is installed correctly. Open the battery door on the back of the camera and make sure the battery is seated all the way in, with the contacts facing outward. Close the door firmly and try the power button again.

If the camera still will not turn on after charging for 30 minutes, try a hard reset. With the battery installed, hold the power button for 10 seconds instead of three. Release it and wait a few seconds, then press it again for three seconds to power on normally. If the camera remains unresponsive, the battery or internal hardware may need replacement.

Using the camera without turning it fully on

The Hero 5 has a low-power mode that lets you view photos and videos without fully powering on the camera. If the camera is off, press the back button once to enter playback mode. The screen will light up and show your stored media without activating the full operating system, which uses less battery.

This mode is useful if you want to review footage quickly without draining the battery. To return to the full menu and recording modes, press the power button to complete the startup sequence.

Frequently Asked Questions

How long does it take for the Hero 5 to fully start up?

The camera usually displays the home menu within two to three seconds of pressing the power button. If it takes longer than five seconds, the battery may be low or the camera may be processing a large file from the previous session.

Can I turn on the Hero 5 with the Wi-Fi remote?

No, the Wi-Fi remote cannot power on the camera. You must use the physical power button on the back of the camera to turn it on. Once the camera is on, you can use the remote to start and stop recording.

What does it mean if the screen stays black after I press the power button?

A black screen usually means the battery is empty or not making contact with the camera. Remove the battery, wait 10 seconds, reinsert it firmly, and try again. If the screen remains black after charging for 30 minutes, the battery or camera may be faulty.

Does the Hero 5 stay on while recording?

Yes, the camera stays powered on while recording video or taking photos. The screen may dim or turn off to save battery, but the camera continues operating. Press any button to wake the screen if needed.