Press and hold the power button on the side or top of your camera
The power button is located on the side of most GoPro models (Hero 11, Hero 10, Hero 9) or on the top of older models like the Hero 8. Press and hold it for about three seconds until you see the GoPro logo appear on the screen and hear a startup sound. The camera will take another few seconds to fully boot up.
If your GoPro does not respond after holding the button for five seconds, the battery may be empty. Plug the camera into a USB charger using the cable that came in the box and wait at least 30 minutes before trying again. A completely drained battery sometimes needs time to accept a charge before the camera will power on.
Key Takeaways
- The power button is on the side of newer GoPro models and on the top of older ones; hold it for three seconds until the logo appears.
- The camera takes a few seconds to fully boot after the logo shows, so wait before pressing buttons or opening the app.
- If the camera does not turn on, charge it for at least 30 minutes because a fully drained battery may not respond when ready.
- Once powered on, the camera enters standby mode and is ready to record or connect to the GoPro app on your phone.
- Pressing the power button once while the camera is on will put it back into standby; holding it for three seconds will shut it down completely.
What happens after the camera powers on
After the GoPro logo disappears, the camera enters standby mode. The screen will show the current mode (video, photo, or time-lapse), the battery percentage, and the storage space remaining. At this point the camera is ready to record — you can press the shutter button (the large button on top) to start capturing video or photos when ready.
If you want to change the recording mode or adjust settings, use the buttons on the back and sides of the camera to navigate the menu. The exact button layout varies by model, but the GoPro app on your phone offers a simpler way to browse settings and preview what the camera sees.
Connecting to the GoPro app on your phone
Once the camera is powered on, you can connect it to your phone using the GoPro app (available for iOS and Android). Open the app, tap the camera icon, and select your GoPro model from the list of available devices. The app will ask for your Wi-Fi password — this is the password for the network your phone is connected to, not a separate GoPro password.
After the app connects, you can preview the camera's view on your phone screen, change recording modes, adjust settings, and read footage directly to your phone. The connection uses Wi-Fi and works best when your phone is within 30 feet of the camera.
Charging the battery before first use
If your GoPro is brand new or has not been used in several months, charge it fully before turning it on for the first time. Connect the camera to a USB power adapter using the cable included in the box. Most GoPro batteries take 60 to 90 minutes to charge fully from empty.
You can check the charge level by looking at the battery icon on the camera screen once it powers on. A full battery icon means the camera is ready to record for the full rated time — typically two to three hours of continuous video, depending on resolution and frame rate.
Troubleshooting if the camera will not turn on
If you hold the power button for five seconds and nothing happens, try these steps in order. First, charge the camera for at least one hour, even if it appears to have some battery left. Second, try a different USB cable or power adapter — the original cable sometimes fails. Third, hold the power button for a full 10 seconds instead of three, in case the button is stuck or the camera is in a deep sleep state.
If the camera still does not turn on after charging and trying a different cable, the battery itself may be defective. GoPro batteries are replaceable — you can order a new one from the GoPro website or from electronics retailers. Most replacement batteries cost between $20 and $40 depending on the model.
Turning the camera off and managing battery life
To turn off the camera, press and hold the power button for three seconds while it is powered on. The screen will go dark and the camera will shut down completely. This is different from pressing the button once, which puts the camera into standby mode — standby still uses a small amount of battery power over time.
If you plan to store the camera for more than a week without using it, power it off completely rather than leaving it in standby. This prevents the battery from slowly draining. Before storing the camera for a month or longer, charge it to about 50 percent and then power it off — this extends the lifespan of the battery.
Frequently Asked Questions
Why does my GoPro take so long to turn on?
The camera needs a few seconds to load its operating system after you see the logo. This is normal and happens on all models. If it takes longer than 15 seconds to fully boot, the battery may be low or the camera may need a software update.
Can I turn on the GoPro using the app instead of the power button?
No. You must press the physical power button on the camera to turn it on. Once it is powered on, you can then open the app to connect. The app cannot wake a camera that is completely shut down.
What if the power button is stuck or hard to press?
Try pressing it from different angles or with slightly more force. If it remains stuck, do not force it — contact GoPro support or visit an electronics repair shop. Forcing a stuck button can damage the internal switch.
Does the camera turn on automatically when I plug it in to charge?
No. Plugging in the camera charges the battery but does not power on the camera. You must press the power button manually. Some older GoPro models may show a charging indicator on the screen without fully powering on.
How long does the battery last after I turn the camera on?
Battery life depends on resolution, frame rate, and whether features like Wi-Fi or image stabilization are on. At standard settings, most GoPro cameras record for two to three hours on a full charge. Using 4K video or higher frame rates drains the battery faster.