Press and hold the power button on the back of the camera

The power button on a GoPro Hero is located on the back of the camera, near the bottom. It is a small, round button that you press and hold for about three seconds until you see the GoPro logo appear on the screen and hear a startup sound. The camera will vibrate once when it powers on.

If the camera does not turn on after holding the button for three seconds, the battery may be empty. Plug the camera into a USB charger using the cable that came in the box, wait 15 to 20 minutes, and try again. A completely dead battery can take longer to show any sign of life.

Once the camera is on, the screen will display the main menu with options like Record, Photos, and Settings. You are now ready to use the camera.

Key Takeaways

  • The power button is on the back of the camera near the bottom, and you must hold it for about three seconds to turn the camera on.
  • You will see the GoPro logo on the screen and hear a startup sound when the camera powers on successfully.
  • If the camera does not respond, the battery is likely empty and needs to charge for 15 to 20 minutes before trying again.
  • The main menu appears once the camera is fully powered on, and you can then select what you want to do next.

What happens if the camera turns on but the screen is blank

If the power button works and you hear the startup sound but the screen stays black, the display may be in sleep mode. Press any button on the camera to wake the screen. If the screen remains blank after pressing buttons, try holding the power button again for three seconds to fully restart the camera.

Another reason the screen might appear blank is if the camera is set to a mode where the display turns off to save battery. This is normal behavior. The camera is still recording or ready to record even if you cannot see the screen. Press the Mode button or the power button to wake the display.

Charging the battery before first use

Before you turn on a new GoPro Hero for the first time, charge the battery fully. Connect the USB-C cable (included in the box) to the camera and plug the other end into a wall charger or computer. A red light on the camera means it is charging. The light will turn green when the battery is full, which usually takes 60 to 90 minutes depending on the charger you use.

Do not use the camera while it is charging. Wait until the light turns green and unplug the cable before powering on. A fully charged battery gives you the longest recording time and the best performance.

Using the power button to turn the camera off

To turn off your GoPro Hero, press and hold the power button on the back for about three seconds, just as you did to turn it on. The screen will go dark and you will hear a shutdown sound. The camera is now off and will not drain the battery.

If you want to save battery between uses, turning the camera off is better than leaving it on. The camera will power down automatically after 5 to 10 minutes of no activity if you have not changed this setting, but manually turning it off is faster and more reliable.

What to do if the power button is stuck or does not respond

If the power button feels stuck or does not respond when you press it, do not force it. The button may be jammed with dirt or sand. Use a dry cloth to gently wipe around the button and try again. If you have been near water or sand, rinse the camera with fresh water and let it dry completely before trying the button again.

If the button still does not work after cleaning, the camera may have a hardware problem. Contact GoPro support through their website with the camera model and serial number. They can tell you whether the camera is still under warranty and what your next steps are.

Turning on the camera for recording right away

Once the camera is powered on and the main menu is showing, you can start recording when ready. Press the large red Record button on the top of the camera or select Record from the menu. The screen will show a countdown (usually 3 seconds) and then recording will begin. A red dot will appear on the screen to show that the camera is actively recording.

If you want to skip the menu and go straight to recording the next time you turn on the camera, you can change this in Settings. Look for "Startup" or "Default Mode" in the Settings menu and select Record. Now when you power on the camera, it will go directly to recording mode instead of showing the menu first.

Frequently Asked Questions

How long does it take for the GoPro Hero to turn on?

The camera usually powers on within 2 to 3 seconds of holding the power button. You will see the GoPro logo and hear a sound. If it takes longer than 5 seconds, release the button and try again. A slow startup usually means the battery is low and needs charging.

Can I turn on the GoPro Hero with the app on my phone?

No, you cannot turn on the camera using the GoPro app. The power button on the back of the camera is the only way to power it on. Once the camera is on, you can connect it to the app to control recording and view footage wirelessly.

Why does my GoPro Hero turn off by itself?

The camera has an auto-shutoff feature that turns it off after 5 to 10 minutes of no activity to save battery. You can change this setting in the Settings menu under "Auto Power Off." You can set it to turn off after 5, 10, or 30 minutes, or disable it entirely if you want the camera to stay on.

What should I do if the camera powers on but when ready shuts down?

This usually means the battery is too low to keep the camera running. Plug the camera in to charge for at least 20 minutes and try again. If the camera still shuts down right away after a full charge, contact GoPro support because the battery may be defective.