Press and hold the power button on the back of the camera
The power button on a GoPro Hero 5 is located on the back of the camera, near the bottom right corner. Press and hold it for about three seconds until you see the GoPro logo appear on the screen and hear a startup sound. The camera will then boot up and show you the main menu.
If the camera does not respond after holding the button for five seconds, the battery may be completely drained. Plug the camera into a USB charger using the included cable and wait at least 30 minutes before trying again.
Key Takeaways
- The power button is on the back of the Hero 5, near the bottom right corner, and requires a three-second hold to turn on.
- You will see the GoPro logo and hear a startup sound when the camera is powering up correctly.
- A completely dead battery will not respond to the power button and needs to charge for at least 30 minutes first.
- Once the camera is on, the main menu appears on the screen and you can navigate to recording or settings.
- The camera will automatically shut down after about five minutes of inactivity to preserve battery life.
What happens after the camera powers on
Once the Hero 5 finishes booting, the main menu screen appears. You will see icons for different modes: Video, Photo, Burst, Time Lapse, and Slow Motion. The screen also displays the current battery percentage in the top left corner and the remaining storage space.
The camera is now ready to record. You can press the red record button on the top of the camera to start recording video when ready, or use the touchscreen to select a different mode first. If you do not touch the camera for about five minutes, it will power down automatically to save battery.
Charging the battery if it is completely dead
If your Hero 5 does not turn on at all, the battery is likely empty. Use the USB-C cable that came with the camera to connect it to a power source. You can plug the cable into a wall charger, a computer, or a portable battery pack.
The camera does not need to be powered on to charge. You will see a small LED light on the back of the camera turn on when it is charging. A completely empty battery typically takes 90 minutes to two hours to reach a full charge. Once the battery has some power, you can try pressing the power button again.
Understanding the battery indicator light
The Hero 5 has a small LED light on the back that tells you about the battery status. When you first press the power button, this light may blink red, which means the battery is low but the camera will still turn on. A solid red light while the camera is on means the battery is critically low and will shut down soon.
If the light does not turn on at all when you press the power button, the battery is completely empty and needs to charge. Once the battery reaches a safe level, the light will turn off or blink green, and the camera will stay on longer.
Why your Hero 5 might not turn on
If the power button does not work after a three-second hold, check these common issues. First, make sure you are pressing the correct button on the back of the camera—it is straightforward to confuse it with the mode button on the side. Second, the battery may be completely drained, which requires charging before the camera will respond.
Third, the camera may be frozen or stuck. If it has been sitting unused for a long time or was exposed to extreme cold, try charging it for at least an hour and then holding the power button for a full ten seconds. If none of these steps work, the power button itself may be damaged and the camera may need professional repair.
Turning the camera off when you are done
To turn off your Hero 5 manually, press and hold the power button again for about three seconds. The screen will go black and you will hear the shutdown sound. The camera will also power down on its own after about five minutes of no activity, so you do not have to remember to turn it off every time you stop recording.
If you plan to store the camera for more than a few weeks, it is a good idea to charge the battery fully before putting it away. Lithium batteries last longer when they are stored with some charge in them rather than completely empty.
Frequently Asked Questions
How long does it take for the Hero 5 to turn on?
The camera usually boots up in about five to ten seconds from the moment you press the power button. You will see the GoPro logo appear on the screen first, followed by the main menu. If it takes longer than 15 seconds, the camera may be frozen and you should try restarting it.
Can I turn on the Hero 5 with the touchscreen?
No, the touchscreen does not turn the camera on. You must use the physical power button on the back. Once the camera is already on, you can use the touchscreen to navigate menus and change settings.
What does it mean if the camera turns on but the screen is black?
The camera may be in a mode where the screen is off to save battery. Try pressing the power button once more to wake the screen, or press the mode button on the side of the camera. If the screen stays black for more than 30 seconds, try turning the camera off and back on again.
Does the Hero 5 have a sleep mode?
The Hero 5 does not have a traditional sleep mode. It either powers on fully or shuts down completely. However, it will automatically power down after about five minutes of inactivity, which serves a similar purpose by preserving battery life.