Press and Hold the Power Button on the Side

The power button on your GoPro Hero 5 Black is a small circular button on the right side of the camera, just above the battery door. To turn on the camera, press and hold this button for about three seconds. You will see the GoPro logo appear on the front screen, and the camera will beep once.

The camera takes another two to three seconds to fully boot up after the logo appears. During this time, the screen will show the GoPro interface and you will hear a second beep. Once you see the main menu on the screen, the camera is ready to use.

If the camera does not turn on after holding the button for five seconds, the battery may be empty. Plug the camera into a USB charger using the included cable and wait at least 30 minutes before trying again.

Key Takeaways

  • The power button is a small circular button on the right side of the camera, just above the battery door.
  • Press and hold the power button for three seconds until you see the GoPro logo and hear a beep.
  • The camera takes another two to three seconds to fully load the main menu after the logo appears.
  • If the camera does not respond, the battery may be dead and needs to charge for at least 30 minutes.
  • You will hear two beeps total — one when the logo appears and one when the camera is fully ready.

What Happens When the Camera Powers On

When the Hero 5 Black turns on, the front touchscreen will light up and display the main menu. This menu shows your recording mode options: Video, Photo, Burst, Time Lapse, and Slow Motion. The back LCD screen (if you have the optional display module attached) will also light up and show the same information.

At the top of the screen, you will see battery percentage, the current resolution setting, and frame rate. On the left side, you will see icons for settings, modes, and other functions. The camera is fully powered on once all of these elements appear and the second beep sounds.

Turning Off the Camera

To turn off the Hero 5 Black, press and hold the same power button for three seconds again. The screen will go dark and you will hear one beep. The camera is now off and will not record or drain the battery.

If you do not turn off the camera manually, it will shut down automatically after five minutes of inactivity. This auto-off feature helps preserve battery life when you forget to power down.

Battery Considerations Before Powering On

The Hero 5 Black uses a rechargeable lithium battery that slides into the bottom of the camera. Before you turn on the camera for the first time, charge the battery fully using the USB cable that came in the box. A full charge takes about two hours.

You can check the battery level on the screen once the camera is on. The battery percentage appears in the top left corner. If the battery is below 10 percent, the camera will show a low battery warning and may shut down during recording.

Cold temperatures drain the battery faster than warm ones. If you are filming in cold weather, keep the camera in an inside pocket or warm bag until you are ready to record, and carry a spare charged battery if you plan to film for more than an hour.

Common Reasons the Camera Won't Turn On

If you press the power button and nothing happens, the battery is almost certainly empty. This is the most common reason the Hero 5 Black does not respond. Plug the camera into a USB power source — a wall outlet, computer, or portable battery pack — and wait at least 30 minutes before trying again.

A second reason is that the battery may not be inserted correctly. Remove the battery door on the bottom of the camera by sliding it toward the back. Take out the battery, wait five seconds, and slide it back in until you hear a click. Then try powering on again.

If the camera still does not turn on after charging and reinserting the battery, the power button itself may be stuck or damaged. Try pressing it firmly several times in quick succession. If it remains unresponsive, the camera may need service.

Using the Camera Right After Powering On

Once the camera is on and the main menu appears, you can start recording when ready. The default mode is Video. Press the red record button on the top of the camera to begin, or press it again to stop. The record button is large and straightforward to find by touch, even if you are not looking at the screen.

To switch to a different mode before recording, swipe left or right on the touchscreen to move between Video, Photo, Burst, Time Lapse, and Slow Motion. Once you select the mode you want, the camera is ready to record in that mode.

The camera will stay on and ready to record until you manually turn it off or until the auto-off timer activates after five minutes of no button presses or screen touches.

Frequently Asked Questions

How long does it take for the GoPro Hero 5 Black to fully turn on?

The camera takes about five seconds total from the moment you press the power button. You will see the GoPro logo after three seconds, and the main menu appears after another two seconds. Once the menu is visible and you hear the second beep, the camera is fully ready to use.

Can I turn on the camera while it is charging?

Yes. The Hero 5 Black can be powered on and used while plugged into a USB charger. This is useful if you want to transfer files to a computer or review footage without draining the battery.

What does it mean if the camera beeps twice when I turn it on?

Two beeps is normal and means the camera has fully powered on and is ready to use. The first beep sounds when the logo appears, and the second beep sounds when the main menu loads. If you hear only one beep and the screen stays dark, the camera may not have fully booted.

Why does my camera turn off by itself after a few minutes?

The Hero 5 Black has an automatic power-off feature that shuts down the camera after five minutes of no activity. This preserves battery life. You can disable this feature in the Settings menu if you want the camera to stay on longer, but this will drain the battery faster.

Is it normal for the camera to be warm when I first turn it on?

Slight warmth is normal, especially if the camera was in a warm environment or if the battery was recently charged. However, if the camera becomes hot to the touch, turn it off when ready and let it cool for 15 minutes before using it again.