Press and hold the power button on the back of the camera
The power button on a GoPro Hero 5 is a small circular button on the back of the camera, just above the battery door. Press it and hold it for about three seconds until you see the GoPro logo appear on the screen. The camera will beep once to confirm it is powering on.
If the camera does not turn on, the battery may be empty. Plug the camera into a USB charger using the included cable and wait at least 30 minutes before trying again. A completely drained battery sometimes needs time to accept a charge before the camera will respond.
Key Takeaways
- The power button is a small circular button on the back of the camera, above the battery door, and requires a three-second hold to turn on.
- The camera will display the GoPro logo and emit a single beep when it powers on successfully.
- If the camera does not respond, charge it for at least 30 minutes using the included USB cable before trying again.
- The camera will power off automatically after five minutes of inactivity unless you change the auto-off setting in the menu.
What happens after the camera powers on
Once the Hero 5 turns on, the touchscreen will display the main menu. You will see icons for different recording modes: Video, Photo, Burst, Time Lapse, and Slow Motion. The camera is now ready to record or take photos.
The first time you power on a new camera, you may see a setup screen asking you to choose your language and set the date and time. Follow the on-screen prompts by tapping the screen to move through these steps. Once setup is complete, the camera will remember these settings.
The auto-off feature and how to adjust it
By default, the Hero 5 will power off automatically after five minutes of inactivity to save battery. If you want to change this, swipe down from the top of the screen to open the settings menu, then tap the gear icon. Look for "Auto Off" and select your preferred time: 5 minutes, 15 minutes, 30 minutes, or Never.
Choosing "Never" means the camera will stay on until you manually power it off by holding the power button again for three seconds. This drains the battery faster, so use it only when you know you will be recording continuously.
Charging the battery before first use
A new Hero 5 camera may come with a partially charged battery. Before your first recording session, connect the camera to a USB power source using the included cable. The charging port is on the side of the camera, marked with a lightning bolt symbol. A full charge takes about two hours.
While the camera is charging, a small light on the back will glow red. When the light turns green, the battery is fully charged and the camera is ready to use. You can power on the camera while it is plugged in and charging without any problem.
Troubleshooting if the camera won't turn on
If you hold the power button for three seconds and nothing happens, try these steps in order. First, check that the battery is actually inside the camera — open the battery door on the back and confirm the battery is seated properly. Second, charge the camera for at least one hour, even if it previously seemed to have charge. Third, try a hard reset by holding the power button for ten seconds instead of three.
If the camera still does not respond after a hard reset and a full charge, the battery itself may be faulty. Try removing the battery, waiting 30 seconds, and reinserting it firmly. If that does not work, the battery may need to be replaced — GoPro sells replacement batteries separately, and they are inexpensive.
Using the camera right after powering on
Once the Hero 5 is on and showing the main menu, you can start recording when ready. Tap the red record button in the center of the screen, or press the shutter button on the top of the camera. The camera will begin recording video in whatever mode you last used — usually Video mode if this is your first time.
To switch modes before recording, tap the mode icon at the top left of the screen. Swipe left or right to see all available modes, then tap the one you want. The camera will remember your choice the next time you power it on.
Frequently Asked Questions
How long does the battery last after I turn on the camera?
A fully charged Hero 5 battery lasts about 60 to 90 minutes of continuous video recording, depending on resolution and frame rate. If you are using Photo or Time Lapse mode, the battery lasts longer because the camera is not recording constantly. The auto-off feature will shut down the camera after five minutes of inactivity to preserve battery if you are not actively using it.
Can I turn on the camera while it is charging?
Yes, you can power on the Hero 5 while it is plugged in and charging. The camera will operate normally and continue to charge at the same time. This is useful if you want to review footage or adjust settings while the battery replenishes.
Why does my camera turn off after a few minutes?
The Hero 5 has an auto-off feature that powers down the camera after five minutes of no activity to save battery. If this is happening, you can disable it by going to Settings, tapping the gear icon, finding "Auto Off," and selecting "Never." Keep in mind that this will drain your battery faster.
What if the power button feels stuck or hard to press?
The power button should click with light pressure. If it feels stuck or requires excessive force, do not force it — this can damage the button. Try gently cleaning around the button with a dry cloth to remove any debris. If it remains stuck, contact GoPro support, as the button may need professional service.