The quickest way to power down your GoPro Hero 5

Press and hold the power button on the back of the camera for three seconds until the screen goes black and the LED indicator light turns off. That's it — your Hero 5 is now powered down. The power button is the small rectangular button on the rear left side of the camera, just above the battery door.

If your camera is in sleep mode (screen dark but still drawing power), holding the power button for three seconds will fully shut it down. You'll know it's completely off when there's no light on the camera at all and the screen remains dark even if you press any buttons.

The Hero 5 doesn't have a separate menu option to turn off the camera — the power button is your only method. This design keeps the shutdown process straightforward and prevents accidental power-downs from menu navigation.

Key Takeaways

  • Hold the power button on the back of the camera for three seconds to turn it off completely.
  • The camera is fully powered down when the LED light is off and the screen stays dark.
  • Sleep mode is different from being powered off — sleep mode still uses battery power, so turn the camera completely off if you won't be using it for a while.
  • There is no menu-based power-off option on the Hero 5; the physical power button is the only way to shut down the camera.

Understanding sleep mode versus full shutdown

Your Hero 5 has two low-power states, and it's worth knowing the difference. Sleep mode activates automatically after about five minutes of inactivity — the screen goes dark and the camera stops recording, but it's still drawing a small amount of battery power. You can wake it when ready by pressing any button.

Full shutdown happens when you hold the power button for three seconds. The camera uses zero power in this state (except for the internal clock, which draws negligible power). If you're storing the camera for days or weeks, or if you want to preserve battery between uses, full shutdown is the right choice.

Sleep mode is convenient for quick breaks during a shooting session — you don't have to wait for the camera to boot back up. But if you're done for the day, powering off completely will keep your battery charge intact for your next outing.

What happens to your footage when you power off

Turning off the Hero 5 does not delete any video or photos you've already recorded. All footage is saved to the microSD card inside the camera, and that data remains there whether the camera is on or off. Powering down is completely safe for your files.

If you were in the middle of recording when you power off, that current clip will not be saved — the camera needs to finish writing the file to the card. Always stop recording before shutting down the camera if you want to keep that footage.

Checking battery level before powering off

Before you shut down your Hero 5, glance at the battery indicator on the screen. It appears as a small battery icon in the top left corner of the display and shows roughly how much charge remains. This takes just a second and helps you know whether you need to charge the camera before your next use.

If the battery is very low, the camera may power off on its own when the charge runs out. Intentionally powering off when the battery is low won't harm the camera or the battery itself — lithium batteries in action cameras are designed to handle this.

Removing the battery for extended storage

If you're storing your Hero 5 for more than a few weeks, consider removing the battery entirely. Open the battery door on the back of the camera and slide the battery out. Store the battery separately in a cool, dry place — not in the camera.

This step prevents the battery from slowly draining while the camera sits unused, and it's the best way to preserve battery health over long storage periods. When you're ready to use the camera again, straightforward slide the battery back in and power on normally.

Troubleshooting if the power button isn't responding

If you hold the power button for three seconds and nothing happens, the battery may be completely drained. Plug the camera into a USB charger using the included cable and let it charge for at least 30 minutes, then try the power button again.

If the camera still won't respond after charging, try a hard reset: remove the battery, wait 10 seconds, and reinsert it. Then attempt to power on. If the camera remains unresponsive, the internal electronics may need service — contact GoPro support or visit an authorized repair center.

Frequently Asked Questions

Does sleep mode save battery compared to leaving the camera on?

Yes, sleep mode uses significantly less power than an active, recording camera. However, full shutdown uses almost no power at all. If you're taking a break for just a few minutes, sleep mode is fine. For longer breaks or overnight storage, power off completely.

Will the camera turn off automatically if I forget to power it down?

The Hero 5 will enter sleep mode after about five minutes of inactivity, but it won't fully shut itself off. You must manually hold the power button to turn it off completely. If you leave it in sleep mode for days, the battery will eventually drain.

Can I turn off the camera while it's recording?

You can, but the current video clip won't be saved. Always press the stop button to end your recording before powering off the camera. This ensures the file is written to the memory card.

What's the difference between powering off and removing the battery?

Powering off leaves the battery inside the camera but stops all power draw. Removing the battery completely prevents any power drain and is better for long-term storage. Both methods preserve your recorded footage.

How long does it take the Hero 5 to power back on after shutdown?

The Hero 5 takes about 2 to 3 seconds to boot up after you press the power button. This is normal. If startup takes much longer, the battery may be low or the camera may need a hard reset.